FXLA102L8X

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. Features            Description Bi-Directional Interface betw een Tw o Levels: from 1.1 V to 3. 6V Fully Configurable: Inputs and Outputs Track V CC Level Non-Preferential Pow er-Up; Either V CC May Be Pow ered Up First Outputs Sw itch to 3-State if Either V CC is at GND Pow er-Off Protection Bus-Hold on Data Inputs Eliminates the Need for Pull-Up Resistors; Do Not Use Pull-Up Resistors on A or B Ports Control Input (/OE) Referenced to V CCA Voltage Packaged in MicroPakTM 8 (1.6 mm x 1.6 mm) Direction Control Not Necessary 100 Mbps Throughput w hen Translating Betw een 1.8 V and 2.5 V ESD Protection Exceeds: The FXLA102 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation betw een tw o logic levels. The device allow s translation betw een voltages as high as 3.6 V to as low as 1.1 V. The A port tracks the V CCA level and the B port tracks the V CCB level. This allow s for bi-directional voltage translation over a variety of voltage levels: 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V. The device remains in three-state as long as either V CC=0 V, allow ing either V CC to be pow ered up first. Internal pow er-dow n control circuits place the device in 3-state if either V CC is removed. The /OE input, w hen HIGH, disables both the A and B ports by placing them in a 3-state condition. The /OE input is supplied by V CCA. The FXLA102 supports bi-directional translation w ithout the need for a direction control pin. The tw o ports of the device have auto-direction sense capability. Either port may sense an input signal and transfer it as an output signal to the other port. - 15 kV HBM ((B Port I/O to GND) per JESD22A114 & Mil Std 883e 3015.7) - 8 kV HBM ((A Port I/O to GND) per JESD22-A114 & Mil Std 883e 3015.7) - 2 kV CDM (per ESD STM 5.3) Ordering Information Part Number FXLA102L8X Top Mark Operating Temperature Range XF -40 to 85°C © 2009 Semiconductor Components Industries, LLC. October-2017, Rev. 2 Package 8-Lead MicroPakTM 1.6 mm x 1.6 mm Package Packing Method 5 K Units Tape and Reel Publication Order Number: FXLA102/D FXLA102 — Low-Voltage Dual-Supply 2-Bit Voltage Translator FXLA102 Low-Voltage Dual-Supply 2-Bit Voltage Translator with Configurable Voltage Supplies and Signal Levels, 3-State Outputs, and Auto Direction Sensing VCCB B0 B1 OE 7 6 5 8 4 1 2 3 VCCA A0 A1 GND Figure 1. Pin Configuration (Top Through View ) Pin Definitions Pin # Name Description 1 V CCA 2 A0 A Side Input or 3-State Output 3 A1 A Side Input or 3-State Output 4 GND Ground 5 /OE Output Enable Input 6 B1 B Side Input or 3-State Output 7 B0 B Side Input or 3-State Output 8 V CCB A-Side Pow er Supply B Side Pow er Supply www.onsemi.com 2 FXLA102 — Low-Voltage Dual-Supply 2-Bit Voltage Translator Pin Configuration VCCA VCCB OE A0 B0 A1 B1 Figure 2. Functional Diagram Function Table Control Outputs /OE L Normal Operation H 3-State H = HIGH Logic Level L = LOW Logic Level www.onsemi.com 3 FXLA102 — Low-Voltage Dual-Supply 2-Bit Voltage Translator Functional Diagram Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol V CC Parameter Supply Voltage VI DC Input Voltage VO ( ) Output Voltage 2 IIK DC Input Diode Current IOK DC Output Diode Current IOH/IOL ICC TSTG PD ESD Conditions Min. Max. V CCA -0.5 4.6 V CCB -0.5 4.6 I/O Ports A and B -0.5 4.6 Control Input (/OE) -0.5 4.6 Output 3-State -0.5 4.6 Output Active (A n) -0.5 V CCA +0.5 Output Active (Bn) -0.5 V CCB +0.5 V I