GF1A - GF1M
General Purpose Rectifiers
(Glass Passivated)
Features
•
•
•
•
•
Low Forward Voltage Drop
High Current Capability
Easy Pick and Place
High Surge Current Capability
This Device is Pb−Free and is RoHS Compliant
www.onsemi.com
SMA
CASE 403AE
(COLOR BAND DENOTES CATHODE)
MARKING DIAGRAM
$Y&Z&3
GF1x
$Y
&Z
&3
GF1x
x
= ON Semiconductor Logo
= Assembly Plant Code
= Data Code (Year & Week)
= Specific Device Code
= A/B/D/G/J/K/M
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2001
August, 2019 − Rev. 8
1
Publication Order Number:
GF1A/D
GF1A − GF1M
ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise noted
Value
Symbol
Parameter
1A
1B
1D
1G
1J
1K
1M
Units
50
100
200
400
600
800
1000
V
VRRM
Maximum Repetitive Reverse Voltage
IF(AV)
Average Rectified Forward Current, @ TL = 125°C
1.0
A
IFSM
Non−repetitive Peak Forward Surge Current
8.3 ms Single Half−Sine−Wave
30
A
Tstg
Storage Temperature Range
−65 to +175
°C
TJ
Operating Junction Temperature Range
−65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Symbol
PD
Parameter
Value
Units
Power Dissipation
1.8
W
RθJA
Thermal Resistance, Junction−to−Ambient*
80
°C/W
RqJL
Thermal Resistance, Junction−to−Lead*
26
°C/W
*Device mounted on PCB with 0.2 x 0.2″ (5.0 x 5.0 mm) copper pad areas.
ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise noted
Device
Symbol
1A
Parameter
VF
Maximum Forward Voltage @ 1.0 A
trr
Maximum Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
IR
Maximum Reverse Current @ Rated VR
TA = 25°C
TA = 125°C
CT
1B
1D
1G
1.0
1J
1K
1M
Units
1.2
V
ms
2.0
mA
5.0
50
Typical Capacitance
VR = 4.0 V, f = 1.0 MHz
15
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
PACKAGE MARKING AND ORDERING INFORMATION
Device
Device Marking
GF1A
GF1A
GF1B
GF1B
GF1D
GF1D
GF1G
GF1G
GF1J
GF1J
GF1K
GF1K
GF1M
GF1M
Package
Quantity†
SMA
7500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2
GF1A − GF1M
1.6
Peak Forward Surge Current, I FSM [A]
Average Rectified Forward Current, I F [A]
TYPICAL CHARACTERISTICS
1.4
1.2
1
RESISTIVE OR
INDUCTIVE LOAD
P.C.B. MOUNTED
ON 0.2 x 0.2”
(5.0 x 5.0 mm)
COPPER PAD AREAS
0.8
0.6
0.4
0.2
0
0
25
50
75
100
125
Lead Temperature [ºC]
150
175
100
50
20
10
5
2
1
1
100
50
100
100
10
10
Reverse Current, I R [mA]
Forward Current, I F [A]
5
10
20
Number of Cycles at 60 Hz
Figure 2. Non−Repetitive Surge Current
Figure 1. Forward Current Derating Curve
1
0.1
0.01
0.4
2
TA = 25º C
Pulse Width = 300 mS
2% Duty Cycle
0.6
0.8
1
1.2 1.4 1.6
Forward Voltage, V F [V]
1.8
TA = 125º C
1
0.1
TA = 75º C
0.01
TA = 25º C
0.001
2
Figure 3. Forward Voltage Characteristics
0
20
40
60
80
100
120 140
Percent of Rated Peak Reverse Voltage [%]
Figure 4. Reverse Current vs. Reverse Voltage
Total Capacitance, C T [pF]
100
50
20
10
5
2
1
0.01
0.1
1
10
Reverse Voltage, V R [V]
Figure 5. Total Capacitance
www.onsemi.com
3
100
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SMA
CASE 403AE
ISSUE O
B
B
5.60
4.80
0.13 M
C
B
DATE 31 AUG 2016
A
2.65
2.95
2.50
1.65
1.20
B
1.75
4.30
B
A
4.75
4.00
LAND PATTERN RECOMMENDATION
TOP VIEW
2.50 MAX
A
2.20
1.90
B
C
0.203
0.050
2.05
1.95
NOTES:
0.30
0.05
0.13 M
C
SIDE VIEW
8°
0°
B
A
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
B DOES NOT COMPLY JEDEC STANDARD
VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5−2009.
E. LAND PATTERN STD. DIOM5025X231M
R0.15 4X
GAGE PLANE
0.45
8°
0°
0.41
0.15
1.52
0.75
DETAIL A
SCALE 20 : 1
DOCUMENT NUMBER:
DESCRIPTION:
98AON13440G
SMA
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
