Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
H11N1M, H11N2M
6-Pin DIP Schmitt Trigger Output Optocoupler
Features
Description
• High Data Rate, 5 MHz Typical (NRZ)
• Free from Latch-up and Oscillation Throughout
Voltage and Temperature Ranges
• Microprocessor Compatible Drive
• Logic Compatible Output Sinks 16 mA at 0.5 V
Maximum
• Guaranteed On/Off Threshold Hysteresis
• Wide Supply Voltage Capability, Compatible with All
Popular Logic Systems
• Safety and Regulatory Approvals:
– UL1577, 4,170 VACRMS for 1 Minute
– DIN-EN/IEC60747-5-5, 850 V Peak Working
Insulation Voltage
The H11NXM series has a high-speed integrated circuit
detector optically coupled to an aluminium gallium
arsenide (AlGaAs) infrared emitting diode. The output
incorporates a Schmitt trigger, which provides hysteresis
for noise immunity and pulse shaping. The detector
circuit is optimized for simplicity of operation and utilizes
an open-collector output for maximum application
flexibility.
Applications
• Logic-to-Logic Isolator
• Programmable Current Level Sensor
• Line Receiver—Eliminate Noise and Transient
Problems
• AC to TTL Conversion—Square Wave Shaping
• Interfaces Computers with Peripherals
• Isolated Power MOS Driver for Power Supplies
Schematic
Package Outlines
6 VCC
ANODE 1
CATHODE 2
5 GND
Truth Table
4 VO
3
Figure 1. Schematic
©2005 Fairchild Semiconductor Corporation
H11N1M, H11N2M Rev. 1.5
Input
Output
H
L
L
H
Figure 2. Package Outlines
www.fairchildsemi.com
H11N1M, H11N2M — 6-Pin DIP Schmitt Trigger Output Optocoupler
September 2016
As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Parameter
Installation Classifications per DIN VDE
0110/1.89 Table 1, For Rated Mains Voltage
Characteristics
< 150 VRMS
I–IV
I–IV
< 300 VRMS
Climatic Classification
55/100/21
Pollution Degree (DIN VDE 0110/1.89)
2
Comparative Tracking Index
Symbol
VPR
175
Parameter
Value
Unit
Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR,
Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC
1360
Vpeak
Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR,
100% Production Test with tm = 1 s, Partial Discharge < 5 pC
1594
Vpeak
VIORM
Maximum Working Insulation Voltage
850
Vpeak
VIOTM
Highest Allowable Over-Voltage
6000
Vpeak
External Creepage
≥7
≥7
≥ 10
≥ 0.5
mm
External Clearance
External Clearance (for Option TV, 0.4" Lead Spacing)
mm
mm
mm
DTI
Distance Through Insulation (Insulation Thickness)
TS
Case Temperature(1)
175
°C
IS,INPUT
Current(1)
350
mA
800
mW
> 109
Ω
Input
PS,OUTPUT Output
RIO
Power(1)
Insulation Resistance at TS, VIO = 500 V(1)
Note:
1. Safety limit values – maximum values allowed in the event of a failure.
©2005 Fairchild Semiconductor Corporation
H11N1M, H11N2M Rev. 1.5
www.fairchildsemi.com
2
H11N1M, H11N2M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Safety and Insulation Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified.
Symbol
Parameters
Value
Units
Total Device
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +85
°C
TJ
TSOL
PD
Junction Temperature
Lead Solder Temperature
-40 to +125
°C
260 for 10 seconds
°C
210
mW
2.94
mW/°C
Total Device Power Dissipation at 25°C
Derate Above 25°C
Emitter
IF
Continuous Forward Current
30
mA
VR
Reverse Voltage
6
V
Forward Current – Peak (1 µs pulse, 300 pps)
100
mA
LED Power Dissipation
60
mW
PD
Detector Power Dissipation
150
mW
VO
V45 Allowed Range
0 to 16
V
VCC
V65 Allowed Range
3 to 16
V
50
mA
IF(pk)
PD
Detector
IO
I4 Output Current
Electrical Characteristics
TA = 25°C unless otherwise specified.
Individual Component Characteristics
Symbol
Parameters
Test Conditions
Min.
Typ.
Max.
1.4
2.0
0.75
1.25
Units
Emitter
IF = 10 mA
V
VF
Input Forward Voltage
IR
Reverse Current
VR = 5 V
10
µA
CJ
Capacitance
V = 0, f = 1.0 MHz
100
pF
15
V
10
mA
100
µA
IF = 0.3 mA
Detector
VCC
ICC(off)
IOH
Operating Voltage Range
4
Supply Current
IF = 0, VCC = 5 V
Output Current, High
IF = 0, VCC = VO = 15 V
©2005 Fairchild Semiconductor Corporation
H11N1M, H11N2M Rev. 1.5
6
www.fairchildsemi.com
3
H11N1M, H11N2M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Absolute Maximum Ratings
TA = 25°C unless otherwise specified.
Transfer Characteristics
Symbol
ICC(on)
DC Characteristics
Test Conditions
Device
Supply Current
IF = 10 mA, VCC = 5 V
All
VOL
Output Voltage, Low
RL= 270 Ω,VCC = 5 V,
IF = IF(on) Maximum
All
IF(on)
Turn-On Threshold Current
RL= 270 Ω, VCC = 5 V(2)
IF(off)
Turn-Off Threshold Current
IF(off) / IF(on) Hysteresis Ratio
Min.
Typ.
Max.
Units
6.5
10.0
mA
0.5
V
H11N1M
0.8
3.2
H11N2M
2.3
5.0
RL = 270 Ω, VCC = 5 V
All
0.3
RL = 270 Ω, VCC = 5 V
All
0.65
mA
mA
0.95
Switching Speed
Symbol
ton
tr
toff
tf
AC Characteristics
Test Conditions
Min.
Typ.
Max.
Units
330
ns
Turn-On Time
C = 120 pF, tP = 1 µs,
RE = (3), Figure 9
100
Rise Time
C = 120 pF, tP = 1 µs,
RE = (3), Figure 9
7.5
Turn-Off Time
C = 120 pF, tP = 1 µs,
RE = (3), Figure 9
150
Fall Time
C = 120 pF, tP = 1 µs,
RE = (3), Figure 9
12
ns
5
MHz
Data Rate
ns
330
ns
Isolation Characteristics
Symbol
Parameters
Test Conditions
VISO
Input-Output Isolation Voltage t = 1 Minute
CISO
Isolation Capacitance
RISO
Isolation Resistance
Min.
Typ.
Max.
4170
VI-O = 0 V, f = 1 MHz
VI-O = ±500 VDC, TA = 25°C
0.4
1011
Units
VACRMS
0.6
pF
Ω
Notes:
2. Maximum IF(on) is the maximum current required to trigger the output. For example, a 3.2 mA maximum trigger
current would require the LED to be driven at a current greater than 3.2 mA to guarantee the device will turn on.
A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable
LED drive current is 30 mA.
3. H11N1: RE = 910 Ω, H11N2: RE = 560 Ω
©2005 Fairchild Semiconductor Corporation
H11N1M, H11N2M Rev. 1.5
www.fairchildsemi.com
4
H11N1M, H11N2M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Electrical Characteristics (Continued)
VOH
VO - OUTPUT VOLTAGE (V)
5
VCC = 5 V
RL = 270 Ω
TA = 25°C
4
3
IF(OFF)
1.4
IF - NORMALIZED THRESHOLD CURRENT
6
IF(ON)
2
Hysteresis area
shaded for illustration
1
1.0
0.8
TURN OFF THRESHOLD
0.6
0.4
VOL
1
2
NORMALIZED TO::
TURN ON THRESHOLD AT
VCC = 5 V, TA = 25°C
0.2
0.0
0
0
TURN ON THRESHOLD
1.2
3
0
4
2
4
6
8
10
12
14
16
VCC – SUPPLY VOLTAGE (V)
IF – INPUT CURRENT (mA)
Figure 3. Transfer Characteristics
Figure 4. Threshold Current vs. Supply Voltage
1.2
100
IO - LOAD CURRENT (mA)
NORMALIZED THRESHOLD
CURRENT IF(On), IF(Off)
IF(On)
1.0
IF(Off)
0.8
0.6
0.4
NORMALIZED TO :
VCC = 5 V
TA = 25°C
0.2
0.0
0
10
20
30
40
50
60
10
1
0.0
70
TA – TEMPERATURE (°C)
0.2
0.4
0.6
0.8
1.0
VO – OUTPUT VOLTAGE, LOW (V)
Figure 5. Threshold Current vs. Temperature
Figure 6. Load Current vs. Output Voltage
100
12
IF – FORWARD CURRENT (mA)
TA = -40°C
10
ICC – SUPPLY CURRENT (mA)
IF = IF(ON)
VCC = 5 V
8
TA = 25°C
6
TA = 85°C
4
ON STATE I F = 10 mA
OFF STATE I F = 0
2
TA = 85°C
TA = -40°C
TA = 25°C
10
1
0
2
4
6
8
10
12
14
1.0
16
1.4
1.6
1.8
2.0
Figure 8. LED Forward Current vs. Forward Voltage
Figure 7. Supply Current vs. Supply Voltage
©2005 Fairchild Semiconductor Corporation
H11N1M, H11N2M Rev. 1.5
1.2
VF – FORWARD VOLTAGE (V)
VCC – SUPPLY VOLTAGE (V)
www.fairchildsemi.com
5
H11N1M, H11N2M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Typical Performance Curves
C
WS
I6
5V
IF
VIN 5 V
1 H11N1M
RE
6
RL
270 Ω
4
VIN
tr = tf ≤ 0.01 μs
Z = 50 Ω
5
2
50%
0
VO
toff
ton
0.1μF
10%
VO
90%
tf
tr
Figure 9. Switching Test Circuit and Waveforms
Reflow Profile
300
260°C
280
260
>245°C = 42 Sec
240
220
200
180
°C
Time above
183°C = 90 Sec
160
140
120
1.822°C/Sec Ramp up rate
100
80
60
40
33 Sec
20
0
0
60
120
180
270
360
Time (s)
Figure 10. Reflow Profile
©2005 Fairchild Semiconductor Corporation
H11N1M, H11N2M Rev. 1.5
www.fairchildsemi.com
6
H11N1M, H11N2M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Switching Test Circuit and Waveforms
Part Number
Package
Packing Method
H11N1M
DIP 6-Pin
Tube (50 Units)
H11N1SM
SMT 6-Pin (Lead Bend)
Tube (50 Units)
H11N1SR2M
SMT 6-Pin (Lead Bend)
Tape and Reel (1000 Units)
H11N1VM
DIP 6-Pin, DIN EN/IEC60747-5-5 Option
Tube (50 Units)
H11N1SVM
SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option
Tube (50 Units)
H11N1SR2VM
SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option
Tape and Reel (1000 Units)
H11N1TVM
DIP 6-Pin, 0.4” Lead Spacing, DIN EN/IEC60747-5-5 Option
Tube (50 Units)
Note:
4. The product orderable part number system listed in this table also applies to the H11N2M product families.
Marking Information
1
V
3
H11N1
2
X YY Q
6
4
5
Figure 11. Top Mark
Table 1. Top Mark Definitions
1
Fairchild Logo
2
Device Number
3
DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option)
4
One-Digit Year Code, e.g., “6”
5
Digit Work Week, Ranging from “01” to “53”
6
Assembly Package Code
©2005 Fairchild Semiconductor Corporation
H11N1M, H11N2M Rev. 1.5
www.fairchildsemi.com
7
H11N1M, H11N2M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Ordering Information
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
