H22LTB

H22L Series OPTOLOGIC® OPTICAL INTERRUPTER SWITCH Features PART NUMBER DEFINITIONS ■ Black plastic housing ■ Choice of inverter or buffer output functions ■ Choice of open-collector or totem-pole output configuration ■ No contact switching ■ TTL/CMOS compatible output functions H22LTB Totem-pole, buffer output H22LTI Totem-pole, inverter output H22LOB Open-collector, buffer output H22LOI Open-collector, inverter output Package Dimensions 0.472 (12.0) 0.457 (11.6) 0.249 (6.35) 0.243 (6.15) + D E + CL 0.39 (1.00) 0.34 (0.85) CL 0.129 (3.3) 0.119 (3.0) 0.103 (2.60) NOM Optical CL 0.433 (11.0) 0.422 (10.7) 0.315 (8.0) CL 0.055 (1.40) 0.045 (1.14) 0.110 (2.8) 0.091 (2.3) 0.055 (1.40) 0.045 (1.14) 0.250 (6.36) 0.216 (5.50) 0.100 (2.55) 0.080 (2.05) 0.100 (2.55) 0.080 (2.05) PIN 1 ANODE PIN 2 CATHODE 2 3 PIN 3 VCC 4 1 PIN 4 VO 5 0.020 (0.51) (SQ) PIN 5 GND NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Lead cross section is controlled between .050 (1.27) from the seating plane and the end of the leads. ©2004 Fairchild Semiconductor Corporation H22L Series Rev. 1.1 1 www.fairchildsemi.com H22L Series OPTOLOGIC® OPTICAL INTERRUPTER SWITCH November 2004 Parameter Operating Temperature Symbol Rating Units TOPR -40 to +85 °C Storage Temperature TSTG -40 to +85 °C Soldering Temperature (Iron)(3,4,5,6) TSOL-I 240 for 5 sec °C (Flow)(3,4,6) TSOL-F 260 for 10 sec °C Continuous Forward Current IF 50 mA Reverse Voltage VR 5 V PD 100 mW IF 50 mA Soldering Temperature EMITTER Power Dissipation(1) SENSOR Continuous Forward Current Output Current IO 50 mA Supply Voltage VCC 4.0 to 16 V Output Voltage VO 30 V Power Dissipation(1) PD 150 mW ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) Part Number Test Conditions Operating Supply Voltage VCC Symbol Min. VCC Typ. Max Units 4.5 16 V INPUT DIODE Forward Voltage IF = 20 mA VF — 1.7 V Reverse Leakage Current VR = 5 V IR — 10 µA Operating Supply Current IF = 15 mA or 0 mA, VCC = 16 V ICC — 5 mA Low Level Output Voltage H22LTB, H22LOB IF = 0 mA, VCC = 5 V, RL = 100 Ω VOL — 0.4 V Low Level Output Voltage H22LTI, H22LOI IF = 15 mA, VCC = 5 V, RL = 360 Ω VOL — 0.4 V High Level Output Voltage H22LTB IF = 15 mA, VCC = 5 V, IOH = -800 µA VOH 2.4 — V High Level Output Voltage H22LTI IF = 0 mA, VCC = 5 V, IOH = -800 µA VOH 2.4 — V High Level Output Current H22LOB IF = 0 mA, VCC = 5 V, IOH = -800 µA IOH 100 µA High Level Output Current H22LOI IF = 0 mA, VCC = 5 V, VOH = 30 V IOH — 100 µA Turn on Threshold Current VCC = 5 V, RL = 360 Ω IF(+) — 15 mA Turn off Threshold Current VCC = 5 V, RL = 360 Ω IF(–) 0.50 — mA COUPLED IF(+) / IF(–) 1.3 Propagation Delay VCC = 5 V, RL = 360 Ω tPLH, tPHL 5 µs Output Rise and Fall Time VCC = 5 V, RL = 360 Ω tr, tf 70 ns Hysteresis Ratio 2 H22L Series Rev. 1.1 www.fairchildsemi.com H22L Series OPTOLOGIC® OPTICAL INTERRUPTER SWITCH ABSOLUTE MAXIMUM RATINGS (TA = 25°C Unless otherwise specified) H22L Series OPTOLOGIC® OPTICAL INTERRUPTER SWITCH NOTES (Applies to Max Ratings and Characteristics Tables.): 1. Derate power dissipation linearly 1.67 mW/°C above 25°C. 2. Derate power dissipation linearly 2.50 mW/°C above 25°C. 3. RMA flux is recommended. 4. Methanol or isopropyl alcohols are recommended as cleaning agents. 5. Soldering iron 1/16” (1.6mm) from housing. 6. As long as leads are not under any stress or spring tension. INPUT / OUTPUT TABLE Part Number LED Output H22LTB On High H22LTB Off Low H22LTI On Low H22LTI Off High H22LOB On High H22LOB Off Low H22LOI On Low H22LOI Off High 3 H22L Series Rev. 1.1 www.fairchildsemi.com ANODE (1) VOLTAGE REGULATOR VCC (3) H22LTB LA VOUT (4) CATHODE (2) ANODE (1) Totem-Pole Output Buffer GND (5) VOLTAGE REGULATOR VCC (3) H22LTI LA VOUT (4) CATHODE (2) ANODE (1) GND (5) VCC (3) VOLTAGE REGULATOR VOUT (4) LA GND (5) VCC (3) VOLTAGE REGULATOR VOUT (4) LA H22LOI Open-Collector Output Inverter CATHODE (2) GND (5) 4 H22L Series Rev. 1.1 H22LOB Open-Collector Output Buffer CATHODE (2) ANODE (1) Totem-PoleOutput inverter www.fairchildsemi.com H22L Series OPTOLOGIC® OPTICAL INTERRUPTER SWITCH Circuit Schematics Typical Operating Circuit Switching Speed Test Circuit VCC C2 5V R IN RL R1 R2 .1 uf bypass Pulse Generator VO = 5V f = 10 KHz d.c. = 50% R 1 = 180 Ω R 2 = 360 Ω + V IN - .1 uF bypass VO C1 GND GND C 1 = 15 pf C 2 = 20 pf C 1 and C2 include probe and stray wire capacitance Switching Test Curve for Buffers Switching Test Curve for Inverters 50% 50% 0 mA 0 mA t PLH t PHL t PLH t PHL VOH VOH Output VO 90% 10% 10% 90% Output VO 50% 90% 10% VOL tr 90% tf tf 5 H22L Series Rev. 1.1 10% VOL tr www.fairchildsemi.com H22L Series OPTOLOGIC® OPTICAL INTERRUPTER SWITCH Circuit Schematics (Continued) The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST ActiveArray™ FASTr™ Bottomless™ FPS™ CoolFET™ FRFET™ CROSSVOLT™ GlobalOptoisolator™ DOME™ GTO™ EcoSPARK™ HiSeC™ E2CMOS™ I2C™ EnSigna™ i-Lo™ FACT™ ImpliedDisconnect™ FACT Quiet Series™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC Across the board. Around the world.™ OPTOPLANAR™ PACMAN™ The Power Franchise POP™ Programmable Active Droop™ Power247™ POWEREDGE™ PowerSaver™ PowerTrench QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UltraFET VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I12 6 H22L Series Rev. 1.1 www.fairchildsemi.com H22L Series OPTOLOGIC® OPTICAL INTERRUPTER SWITCH TRADEMARKS