HCPL2531

DATA SHEET www.onsemi.com 8-Pin DIP High Speed Transistor Optocouplers PDIP8 6.6x3.81, 2.54P CASE 646BW 8 1 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M PDIP8 9.655x6.61, 2.54P CASE 646CQ 8 1 PDIP8 GW CASE 709AC 8 Description 1 The 6N135M, 6N136M, HCPL4503M, HCPL2530M, and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor for each channel. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base−collector capacitance of the input transistor. The HCPL4503M has no internal connection to the phototransistor base for improved noise immunity. An internal noise shield provides superior common mode rejection of up to 50,000 V/ms. Features • • • • • • • High Speed – 1 MBit/s Dual−Channel: HCPL2530M, HCPL2531M CTR Guaranteed 0°C to 70°C No Base Connection for Improved Noise Immunity (HCPL4503M) Superior CMR of 15,000 V/ms Minimum (HCPL4503M) Safety and Regulatory Approvals ♦ UL1577, 5,000 VACRMS for 1 Minute ♦ DIN EN/IEC60747−5−5 These are Pb−Free Devices 1 MARKING DIAGRAM ON 6N135 VXXYYB 6N135 = Device Number V = DIN EN/IEC60747−5−5 Option (only appears on component ordered with this option) XX = Two Digit Year Code, e.g., ‘15’ YY = Two Digit Work Week Ranging from ‘01’ to ‘53’ B = Assembly Package Code ORDERING INFORMATION See detailed ordering and shipping information on page 11 of this data sheet. Applications • • • • PDIP8 GW CASE 709AD 8 Line Receivers Pulse Transformer Replacement Output Interface to CMOS−LSTTL−TTL Wide−Bandwidth Analog Coupling Related Resources • https://www.onsemi.com/products/interfaces/high−performance−opto couplers • https://www.onsemi.com/products/interfaces/high−performance−opto couplers/high−performance−transistor−optocouplers/hcpl0500 • https://www.onsemi.com/products/interfaces/high−performance−opto couplers/high−performance−transistor−optocouplers/fodm452 • https://www.onsemi.com/products/interfaces/high−performance−opto couplers/low−voltage−high−performance−optocouplers/fod050l © Semiconductor Components Industries, LLC, 2008 September, 2021 − Rev. 2 1 Publication Order Number: HCPL2530M/D Single−Channel: 6N135M, 6N136M, HCPL4503M Dual−Channel: HCPL2530M, HCPL2531M SCHEMATICS 8 VCC N/C 1 + 1 8 VCC VF1 + 2 7 VB _ 2 6 VO _ 7 VO1 VF _ 3 3 6 VO2 VF2 N/C 4 + 4 5 GND 6N135M, 6N136M, HCPL4503M 5 GND HCPL2530M, HCPL2531M Pin 7 is not connected in the HCPL4503M Figure 1. Schematics SAFETY AND INSULATION RATINGS (As per DIN EN/IEC 60747−5−5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits.) Parameter Characteristics Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage Climatic Classification