DATA SHEET
www.onsemi.com
AC Input, Half Pitch
Mini-Flat Package 4-Pin
Optocoupler
HMHAA280
MPF4
CASE 100AL
Description
The HMHAA280 series consists of two gallium arsenide infrared
emitting diodes, connected in inverse parallel, driving a single silicon
phototransistor in a compact 4−pin mini−flat package. The lead pitch
is 1.27 mm.
MARKING DIAGRAM
ON 280
VXYYM1
Features
•
•
•
•
•
•
Compact 4−pin Package (2.4 mm Maximum Standoff Height)
Half Pitch Leads for Optimum Board Space Savings
Current Transfer Ratio: 50–600%
Available in Tape and Reel Quantities of 2500
CSA (File #1201524), UL (File #E90700) and VDE (File #136480)
Certified
This is a Pb−Free Device
ON
280
V
X
YY
M1
= onsemi Logo
= Device Number
= VDE mark (Note: Only appears on parts
ordered with VDE option – See order entry
table)
= One−Digit Year Code
= Digit Work Week, Ranging from “01” to “53”
= Assembly Package Code
Applications
• AC Line Monitor
• Unknown Polarity DC Sensor
• Telephone Line Receiver
PIN CONNECTIONS
1
4 COLLECTOR
2
3 EMITTER
ORDERING INFORMATION
See detailed ordering and shipping information on page 5
of this data sheet.
© Semiconductor Components Industries, LLC, 2011
November, 2022 − Rev. 2
1
Publication Order Number:
HMHAA280/D
HMHAA280
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise noted)
Symbol
Parameter
Value
Unit
TOTAL PACKAGE
TSTG
Storage Temperature
−55 to + 125
°C
TOPR
Operating Temperature
−55 to + 100
°C
EMITTER
IF (avg)
Continuous Forward Current
50
mA
IF (pk)
Peak Forward Current (1ms pulse, 300 pps.)
1
A
VR
Reverse Input Voltage
6
V
PD
Power Dissipation
Derate Linearly (above 25°C)
60
0.6
mW
mW/°C
Continuous Collector Current
50
mA
Power Dissipation
Derate Linearly (above 25°C)
150
1.5
mW
mW/°C
VCEO
Collector−Emitter Voltage
80
V
VECO
Emitter−Collector Voltage
7
V
DETECTOR
PD
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Symbol
Parameter
Test Condition
Min
Typ
Max
Unit
INDIVIDUAL COMPONENT CHARACTERISTICS
Emitter
VF
Forward Voltage
IF = ±5 mA
−
−
1.4
V
IR
Reverse Current
VR = 5 V
−
−
5
mA
BVCEO
Breakdown Voltage Collector to Emitter
IC = 0.5 mA, IF = 0
80
−
−
V
BVECO
Emitter to Collector
IE = 100 mA, IF = 0
7
−
−
ICEO
Collector Dark Current
VCE = 80 V, IF = 0
−
−
100
nA
CCE
Capacitance
VCE = 0 V, f = 1 MHz
−
10
−
pF
%
Detector
TRANSFER CHARACTERISTICS
DC Current Transfer Ratio
IF = ±5 mA, VCE = 5 V
50
−
600
CTR Symmetry
IF = ±5 mA, VCE = 5 V
0.33
−
3.0
Saturation Voltage
IF = ±8 mA, IC = 2.4 mA
−
−
0.4
V
tr
Rise Time (Non−Saturated)
IC = 2 mA, VCE = 5 V, RL = 100 W
−
3
−
ms
tf
Fall Time (Non−Saturated)
IC = 2 mA, VCE = 5 V, RL = 100 W
−
3
−
ms
3750
−
−
VRMS
CTR
VCE(SAT)
ISOLATION CHARACTERISTICS
VISO
Steady State Isolation Voltage
1 Minute
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
*All typicals at TA = 25°C.
www.onsemi.com
2
HMHAA280
TYPICAL PERFORMANCE CHARACTERISTICS
100
TA = 25°C
IC, COLLECTOR CURRENT (mA)
IF, FORWARD CURRENT (mA)
100
10
1
0.6
0.8
1.0
1.2
VCE = 5 V
10
VCE = 0.4 V
1
0.1
1.6
1.4
VCE = 10 V
1
10
IF, FORWARD CURRENT (mA)
VF, FORWARD VOLTAGE (V)
Figure 2. Collector Current vs. Forward Current
Figure 1. Forward Current vs. Forward Voltage
2.0
NORMALIZED CTR (IF) / CTR (5 mA)
TA = 25°C
VCE = 10 V
VCE = 5 V
100
VCE = 0.4 V
10
1
10
IF = 5 mA
1.0
IF = 10 mA
0.5
IF = 1 mA
0.0
IF = 0.5 mA
−0.5
−40
100
−20
0
20
VCE = 5 V
IF = 25 mA
IF = 5 mA
IF = 10 mA
IF = 1 mA
1
IF = 0.5 mA
−20
60
80
Figure 4. Normalized CTR vs. Temperature
100
0.1
−40
40
TA, AMBIENT TEMPERATURE (°C)
Figure 3. Current Transfer Ratio vs. Forward
Current
10
Normalized to:
IF = 5 mA
VCE = 5 V
TA = 25°C
1.5
IF, FORWARD CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
IC / IF, CURRENT TRANSFER RATIO (%)
1000
100
0
20
40
60
80
100
TA, AMBIENT TEMPERATURE (°C)
Figure 5. Collector Current vs. Temperature
www.onsemi.com
3
100
HMHAA280
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
18
TA = 25°C
40
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
50
IF = 50 mA
IF = 40 mA
IF = 30 mA
30
IF = 10 mA
IF = 20 mA
20
IF = 5.0 mA
10
IF = 1.0 mA
0
0
1
2
3
4
5
6
7
8
IF = 40 mA
14
IF = 30 mA
12
IF = 20 mA
10
IF = 10 mA
8
IF = 5 mA
6
4
IF = 0.5 mA
2
0.2
1000
SWITCHING TIME (ms)
VCE = 48 V
VCE = 24 V
VCE = 10 V
0.01
TA = 25°C
IF = 16 mA
VCC = 5 V
100
20
40
60
80
10
1
0.1
100
tON
10
1
RL, LOAD RESISTANCE (kW)
Figure 8. Collector Dark Current vs. Temperature
Figure 9. Switching Time vs. Load Resistance
0.30
IF = 5 mA
IC = 1 mA
0.28
0.26
0.24
0.22
0.20
0.18
0.16
0.14
0.12
−40
−20
1.0
tS
TA, AMBIENT TEMPERATURE (°C)
0.10
0.8
tOFF
VCE = 5 V
0.001
0
0.6
Figure 7. Collector Current vs. Collector−Emitter
Voltage
10
VCE(SAT), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
ICEO, COLLECTOR DARK CURRENT (mA)
Figure 6. Collector Current vs. Collector−Emitter
Voltage
0.1
0.4
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
1
IF = 2 mA
IF = 1.0 mA
0
0.0
10
9
IF = 50 mA
16
0
20
40
60
80
100
TA, AMBIENT TEMPERATURE (°C)
Figure 10. Collector−Emitter Saturation Voltage
vs. Temperature
www.onsemi.com
4
100
HMHAA280
REFLOW PROFILE
(Heating)
to 30 s
Package Surface Temperature T (°C)
230°C (peak temperature)
210°C
180°C
to 60 s
150 s
90 s
80 s
Time (s)
• Peak reflow temperature: 230°C (package surface temperature) for 30 seconds
• Time of temperature higher than 210°C: 60 seconds or less
• One time soldering reflow is recommended
ORDERING INFORMATION
Package
Shipping†
HMHAA280
MFP−4
100 Units / Tube
HMHAA280R2
MFP−4
2500 / Tape & Reel
HMHAA280R2V
MFP−4, VDE Option
2500 / Tape & Reel
HMHAA280V
MFP−4, VDE Option
100 Units / Tube
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
5
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
MFP4 2.5X4.4, 1.27P
CASE 100AL
ISSUE O
DATE 31 AUG 2016
0.3−0.51
PIN ONE
0.61
1.52
1
3
0.55−0.75
4.83
7.87
4.40 (Typ)
6.30−7.29
2
4
2.31−2.69
1.27
2.39 (Max)
LAND PATTERN RECOMMENDATION
1.95−2.11
0−0.20
R0.15 (Typ)
2̇\:̇
R0.15 (Typ)
1.27+/− .127
0.30−0.89
0.18−0.25
1.19 (Typ)
NOTES:
A) NO STANDARD APPLIES TO THIS PACKAGE
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSION
DOCUMENT NUMBER:
DESCRIPTION:
98AON13485G
MFP4 2.5X4.4, 1.27P
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative