KA5532

www.fairchildsemi.com KA5532 Dual Operational Amplifier Features Description • • • • The KA5532 is a internally compensated dual low noise OP AMP. The high small signal and power bandwidth provides superior performance in high quality AMP, all control circuits, and telephone applications. Internal Frequency Compensation Slew Rate: 8V/µs Input Noise Voltage: 8nV ⁄ Hz (fo = 30Hz) Full Power Bandwidth: 140KHz 8-DIP 1 Internal Block Diagram Rev. 1.0.1 ©2002 Fairchild Semiconductor Corporation KA5532 Absolute Maximum Ratings Parameter Symbol KA5532 Unit VCC ±22 V V(DIFF) ±13 V Input Voltage VI Supply Voltage V Power Dissipation, TA = 25°C 8-DIP PD 1100 mW Operating Temperature Range TOPR 0 ~ +70 °C Power Supply Voltage Differential Input Voltage Thermal Data Parameter Thermal Resistance Junction-Ambient Max. 8-DIP Symbol Value Unit Rθja 110 °C/W Electrical Characteristics (VCC = 15V, VEE = -15V, TA = 25°C) Parameter Symbol Conditions Min. Typ. Max. Unit Input Offset Voltage VIO - - 0.5 4.0 mV Input Offset Current IIO - - 10 150 nA IBIAS - - 200 800 nA Supply Current ICC - - 6.0 16 mA Input Voltage Range VI(R) - ±12 ±13 - V Input Bias Current Common Mode Rejection Range CMRR TA = 25°C 70 100 - dB Power Supply Rejection Ratio PSRR TA = 25°C 80 100 - dB VO(P-P) RL≥600Ω ±12 ±13 - V Input Resistance RI TA = 25°C 30 300 - KΩ Short Circuit Current ISC - 38 - mA Overshoot OS RL =600Ω, CL =100pF - 10 20 % Voltage Gain GV f = 10KHz 2 2.2 - V/mV CL =100pF, RL = 600Ω 8 10 - MHz SR RL =1K, CL =100pF, RL =600Ω 6 8.0 - V/µs eN fO = 30Hz fO = 1KHz - 8.0 5.0 - nV/ Hz Output Voltage Swing Gain Bandwidth Product Slew Rate Input Noise Voltage 2 GBW - KA5532 Typical Performance Characteristics Figure 1. Open Loop Frequency Response Figure 2. Large Signal Frequency Response Figure 3. Supply Current vs Supply Voltage Figure 4. Input Bias Current vs Temperature Figure 5. Output Circuit Current vs Temperature Figure 6. Slew Rate 3 KA5532 Mechanical Dimensions Package Dimensions in millimeters 1.524 ±0.10 #5 2.54 0.100 5.08 MAX 0.200 7.62 0.300 3.40 ±0.20 0.134 ±0.008 +0.10 0.25 –0.05 +0.004 0~15° 4 0.010 –0.002 3.30 ±0.30 0.130 ±0.012 0.33 MIN 0.013 0.060 ±0.004 #4 0.018 ±0.004 #8 9.60 MAX 0.378 #1 9.20 ±0.20 0.362 ±0.008 ( 6.40 ±0.20 0.252 ±0.008 0.46 ±0.10 0.79 ) 0.031 8-DIP KA5532 Ordering Information Product Number Package Operating Temperature KA5532 8-DIP 0 ~ + 70°C 5 KA5532 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 3/5/02 0.0m 001 Stock#DSxxxxxxxx  2002 Fairchild Semiconductor Corporation