Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
KSP2907A
PNP General-Purpose Amplifier
Features
• Collector-Emitter Voltage: VCEO = -60 V
• Suffix “-C” means a Center Collector (1.Emitter 2.Collector 3.Base)
TO-92
12
1
3
Straight Lead
Bulk Packing
2
3
Bent Lead
Tape & Reel
Ammo Packing
KSP2907A: 1. Emitter 2. Base 3. Collector
KSP2907AC: 1. Emitter 2. Collector 3. Base
Ordering Information(1)
Part Number
Marking
Package
Packing Method
KSP2907ABU
KSP2907A
TO-92 3L
Bulk
KSP2907ATA
KSP2907A
TO-92 3L
Ammo
KSP2907ATF
KSP2907A
TO-92 3L
Tape and Reel
KSP2907ACTA
KSP2907AC
TO-92 3L
Ammo
Note:
1. Affix “-C-” means center collector pin. Suffix “-BU” means bulk packing, and straight lead form. Suffix “-TF” means
tape & reel packing, and 0.200 in-line spacing lead form. Suffix “-TA” means ammo packing, and 0.200 in-line
spacing lead form.
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Value
Unit
VCBO
Collector-Base Voltage
-60
V
VCEO
Collector-Emitter Voltage
-60
V
VEBO
Emitter-Base Voltage
-5
V
-600
mA
IC
Collector Current
TJ
Junction Temperature
150
°C
TSTG
Storage Temperature
-55 to +150
°C
© 1999 Fairchild Semiconductor Corporation
KSP2907A Rev. 2.4
www.fairchildsemi.com
KSP2907A — PNP General-Purpose Amplifier
February 2016
Values are at TA = 25°C unless otherwise noted.
Symbol
PD
RθJC
RθJA
Parameter
Power Dissipation by RθJA
Derate Above 25°C
Thermal Resistance, Junction-to-Case(2)
Thermal Resistance, Junction-to-Ambient
(3)
Max.
Unit
625
mW
5
mW/°C
83.3
°C/W
200
°C/W
Notes:
2. Infinite heat sink.
3. PCB size: FR-4, 76 mm x 114 mm x 1.57 mm (3.0 inch x 4.5 inch x 0.062 inch) with minimum land pattern size.
Electrical Characteristics(4)
Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Conditions
Min.
Max.
Unit
BVCBO
Collector-Base Breakdown Voltage
IC = -10 μA, IE = 0
-60
V
BVCEO
Collector-Emitter Breakdown Voltage IC = -10 mA, IB = 0
-60
V
BVEBO
Emitter-Base Breakdown Voltage
IE = -10 μA, IC = 0
-5.0
Collector Cut-Off Current
VCB = -50 V, IE = 0
ICBO
hFE
DC Current Gain
VCE(sat)
Collector-Emitter Saturation Voltage
VBE(sat)
Base-Emitter Saturation Voltage
V
-10
VCE = -10 V, IC = -0.1 mA
75
VCE = -10 V, IC = -1 mA
100
VCE = -10 V, IC = -10 mA
100
VCE = -10 V, IC = -150 mA
100
VCE = -10 V, IC = -500 mA
50
nA
300
IC = -150 mA, IB = -15 mA
-0.4
IC = -500 mA, IB = -50 mA
-1.6
IC = -150 mA, IB = -15 mA
-1.3
IC = -500 mA, IB = -50 mA
-2.6
V
V
Output Capacitance
VCB = -10 V, IE = 0,
f = 1.0 MHz
Current Gain Bandwidth Product
IC = -50 mA, VCE = -20 V,
f = 100 MHz
tON
Turn-On Time
VCC = -30 V, IC = -150 mA,
IB1 = -15 mA
45
ns
tOFF
Turn-Off Time
VCC = -6 V, IC = -150 mA,
IB1 = IB2 = -15 mA
100
ns
Cobo
fT
8
200
pF
MHz
Note:
4. DC items are tested by pulse test: pulse width ≤ 300 μs, duty cycle ≤ 2%
© 1999 Fairchild Semiconductor Corporation
KSP2907A Rev. 2.4
www.fairchildsemi.com
2
KSP2907A — PNP General-Purpose Amplifier
Thermal Characteristics
VBE(sat), VCE(sat)[V], SATURATION VOLTAGE
1000
hFE, DC CURRENT GAIN
VCE = -10V
100
10
-1
-10
-100
-10
IC = 10 IB
VBE(sat)
-1
-0.1
VCE(sat)
-0.01
-1
-1000
-100
-1000
IC[mA], COLLECTOR CURRENT
IC[A], COLLECTOR CURRENT
Figure 2. Collector-Emitter Saturation Voltage and
Base-Emitter Saturation Voltage
Figure 1. DC Current Gain
100
fT[MHz],
CURRENT GAIN BANDWIDTH PRODUCT
1000
IE = 0
f = 1MHz
Cob [pF], CAPACITANCE
-10
10
1
0.1
-1
-10
-100
100
10
-1
-10
-100
-1000
IC[mA], COLLECTOR CURRENT
VCB [V], COLLECTOR-BASE VOLTAGE
Figure 3. Output Capacitance
© 1999 Fairchild Semiconductor Corporation
KSP2907A Rev. 2.4
VCE = -20V
Figure 4. Current Gain Bandwidth Product
www.fairchildsemi.com
3
KSP2907A — PNP General-Purpose Amplifier
Typical Performance Characteristics
KSP2907A — PNP General-Purpose Amplifier
Physical Dimensions
Figure 5. 3-Lead, TO-92, JEDEC TO-92 Compliant Straight Lead Configuration, Bulk Type
© 1999 Fairchild Semiconductor Corporation
KSP2907A Rev. 2.4
www.fairchildsemi.com
4
KSP2907A — PNP General-Purpose Amplifier
Physical Dimensions (Continued)
Figure 6. 3-Lead, TO-92, Molded, 0.2 In Line Spacing Lead Form, Ammo, Tape and Reel Type
© 1999 Fairchild Semiconductor Corporation
KSP2907A Rev. 2.4
www.fairchildsemi.com
5
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
MotionGrid®
MTi®
MTx®
MVN®
mWSaver®
OptoHiT¥
OPTOLOGIC®
AccuPower¥
AttitudeEngine™
Awinda®
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
®
Fairchild
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FastvCore¥
FETBench¥
FPS¥
OPTOPLANAR®
®
Power Supply WebDesigner¥
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
Sync-Lock™
®*
®
TinyBoost
TinyBuck®
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
PSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
Xsens™
❺®
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR
WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF
ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF
OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE
WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
AUTHORIZED USE
Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary
levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive
or other transportation, (2) military/aerospace, (3) any safety critical application – including life critical medical equipment – where the failure of the Fairchild product
reasonably would be expected to result in personal injury, death or property damage. Customer’s use of this product is subject to agreement of this Authorized Use
policy. In the event of an unauthorized use of Fairchild’s product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be
subject to Fairchild’s Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Terms of Use
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I77
© Fairchild Semiconductor Corporation
www.fairchildsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com