Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
LM78XX / LM78XXA
3-Terminal 1 A Positive Voltage Regulator
Features
Description
•
•
•
•
•
The LM78XX series of three-terminal positive regulators
is available in the TO-220 package and with several fixed
output voltages, making them useful in a wide range of
applications. Each type employs internal current limiting,
thermal shut-down, and safe operating area protection. If
adequate heat sinking is provided, they can deliver over
1 A output current. Although designed primarily as fixedvoltage regulators, these devices can be used with external components for adjustable voltages and currents.
Output Current up to 1 A
Output Voltages: 5, 6, 8, 9, 10, 12, 15, 18, 24 V
Thermal Overload Protection
Short-Circuit Protection
Output Transistor Safe Operating Area Protection
TO-220 (Single Gauge)
GND
1
1. Input
2. GND
3. Output
Ordering Information(1)
Product Number
Output Voltage
Tolerance
Package
Operating
Temperature
Packing Method
LM7805CT
LM7806CT
LM7808CT
LM7809CT
LM7810CT
-40°C to +125°C
±4%
LM7812CT
LM7815CT
TO-220
(Single Gauge)
LM7818CT
Rail
LM7824CT
LM7805ACT
LM7809ACT
LM7810ACT
±2%
0°C to +125°C
LM7812ACT
LM7815ACT
Note:
1. Above output voltage tolerance is available at 25°C.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
September 2014
Input
Series Pass
Element
1
Current
Generator
Starting
Circuit
Reference
Voltage
Output
3
SOA
Protection
Error
Amplifier
Thermal
Protection
GND
2
Figure 1. Block Diagram
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
VI
Parameter
Input Voltage
Value
VO = 5 V to 18 V
35
VO = 24 V
40
RθJC
Thermal Resistance, Junction-Case (TO-220)
RθJA
Thermal Resistance, Junction-Air (TO-220)
TOPR
Operating Temperature Range
TSTG
Storage Temperature Range
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
LM78xx
LM78xxA
Unit
V
5
°C/W
65
°C/W
-40 to +125
0 to +125
- 65 to +150
°C
°C
www.fairchildsemi.com
2
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Block Diagram
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 10 V, CI = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25°C
4.80
5.00
5.20
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 7 V to 20 V
4.75
5.00
5.25
Regline
Line Regulation(2)
TJ = +25°C
Regload
Load Regulation(2)
TJ = +25°C
IQ
Quiescent Current
TJ = +25°C
ΔIQ
Quiescent Current
Change
ΔVO/ΔT
VN
VO
Unit
V
VI = 7 V to 25 V
4.0
100.0
VI = 8 V to 12 V
1.6
50.0
IO = 5 mA to 1.5 A
9.0
100.0
IO = 250 mA to 750 mA
4.0
50.0
5
8
IO = 5 mA to 1 A
0.03
0.50
VI = 7 V to 25 V
0.30
1.30
Output Voltage Drift(3)
IO = 5 mA
-0.8
mV/°C
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
42
μV
RR
Ripple Rejection
VDROP
Dropout Voltage
(3)
(3)
f = 120 Hz, VI = 8 V to 18 V
62
mV
mV
mA
mA
73
dB
TJ = +25°C, IO = 1 A
2
V
f = 1 kHz
15
mΩ
RO
Output Resistance
ISC
Short-Circuit Current
TJ = +25°C, VI = 35 V
230
mA
IPK
Peak Current(3)
TJ = +25°C
2.2
A
Notes:
2. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects
must be taken into account separately. Pulse testing with low duty is used.
3. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
3
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7805)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 11 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25°C
5.75
6.00
6.25
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 8.0 V to 21 V
5.70
6.00
6.30
Regline
Line Regulation(4)
TJ = +25°C
VI = 8 V to 25 V
5.0
120.0
VI = 9 V to 13 V
1.5
60.0
Regload
Load Regulation(4)
TJ = +25°C
IO = 5 mA to 1.5 A
9.0
120.0
IO = 250 mA to 750 mA
3.0
60.0
IQ
Quiescent Current
TJ = +25°C
Quiescent Current
Change
IO = 5 mA to 1 A
0.5
VI = 8 V to 25 V
1.3
ΔVO/ΔT
Output Voltage Drift(5)
IO = 5 mA
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
VO
ΔIQ
RR
Ripple
Rejection(5)
5
f = 120 Hz, VI = 8 V to 18 V
62
8
Unit
V
mV
mV
mA
mA
-0.8
mV/°C
45
μV
73
dB
Dropout Voltage
TJ = +25°C, IO = 1 A
2
V
RO
Output Resistance(5)
f = 1 kHz
19
mΩ
ISC
Short-Circuit Current
TJ = +25°C, VI = 35 V
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(5)
Notes:
4. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
5. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
4
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7806)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 14 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
7.7
8.0
8.3
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 10.5 V to 23 V
7.6
8.0
8.4
Regline
Line Regulation(6)
TJ = +25°C
VI = 10.5 V to 25 V
5
160
VI = 11.5 V to 17 V
2
80
Regload
Load Regulation(6)
TJ = +25°C
IO = 5 mA to 1.5 A
10
160
IO = 250 mA to 750 mA
5
80
IQ
Quiescent Current
TJ = +25°C
5
8
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = 10.5 V to 25 V
0.5
1.0
ΔVO/ΔT
Output Voltage Drift(7)
IO = 5 mA
-0.8
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
52
μV
73
dB
VO
ΔIQ
RR
Ripple
Rejection(7)
f = 120 Hz, VI = 11.5 V to 21.5 V
56
V
mV
mV
mA
mA
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(7)
f = 1 kHz
17
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
230
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(7)
Notes:
6. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
7. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
5
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7808)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 15 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
8.65
9.00
9.35
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 11.5 V to 24 V
8.60
9.00
9.40
Regline
Line Regulation(8)
TJ = +25°C
VI = 11.5 V to 25 V
6
180
VI = 12 V to 17 V
2
90
Regload
Load Regulation(8)
TJ = +25°C
IO = 5 mA to 1.5 A
12
180
IO = 250 mA to 750 mA
4
90
IQ
Quiescent Current
TJ = +25°C
Quiescent Current
Change
IO = 5 mA to 1 A
0.5
VI = 11.5 V to 26 V
1.3
ΔVO/ΔT
Output Voltage Drift(9)
IO = 5 mA
-1
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
58
μV
71
dB
VO
ΔIQ
RR
Ripple
Rejection(9)
5
f = 120 Hz, VI = 13 V to 23 V
56
8
V
mV
mV
mA
mA
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(9)
f = 1 kHz
17
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(9)
Notes:
8. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
9. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
6
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7809)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 16 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
9.6
10.0
10.4
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 12.5 V to 25 V
9.5
10.0
10.5
Regline
Line Regulation(10)
TJ = +25°C
VI = 12.5 V to 25 V
10
200
VI = 13 V to 25 V
3
100
Regload
Load Regulation(10)
TJ = +25°C
IO = 5 mA to 1.5 A
12
200
IO = 250 mA to 750 mA
4
400
IQ
Quiescent Current
TJ = +25°C
5.1
8.0
Quiescent Current
Change
IO = 5 mA to 1 A
0.5
VI = 12.5 V to 29 V
1.0
Output Voltage Drift(11)
IO = 5 mA
-1
mV/°C
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
58
μV
71
dB
VO
ΔIQ
ΔVO/ΔT
VN
RR
Ripple
Rejection(11)
f = 120 Hz, VI = 13 V to 23 V
56
V
mV
mV
mA
mA
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(11)
f = 1 kHz
17
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(11)
Notes:
10. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
11. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
7
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7810)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 19 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
11.5
12.0
12.5
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 14.5 V to 27 V
11.4
12.0
12.6
Regline
Line Regulation(12)
TJ = +25°C
VI = 14.5 V to 30 V
10
240
VI = 16 V to 22 V
3
120
Regload
Load Regulation(12)
TJ = +25°C
IO = 5 mA to 1.5 A
11
240
IO = 250 mA to 750 mA
5
120
IQ
Quiescent Current
TJ = +25°C
5.1
8.0
Quiescent Current
Change
IO = 5 mA to 1 A
0.1
0.5
VI = 14.5 V to 30 V
0.5
1.0
Output Voltage Drift(13)
IO = 5 mA
-1
mV/°C
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
76
μV
71
dB
VO
ΔIQ
ΔVO/ΔT
VN
RR
Ripple
Rejection(13)
f = 120 Hz, VI = 15 V to 25 V
55
V
mV
mV
mA
mA
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(13)
f = 1 kHz
18
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
230
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(13)
Notes:
12. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
13. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
8
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7812)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 23 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
14.40
15.00
15.60
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 17.5 V to 30 V
14.25
15.00
15.75
Regline
Line Regulation(14)
TJ = +25°C
VI = 17.5 V to 30 V
11
300
VI = 20 V to 26 V
3
150
Regload
Load Regulation(14)
TJ = +25°C
IO = 5 mA to 1.5 A
12
300
IO = 250 mA to 750 mA
4
150
IQ
Quiescent Current
TJ = +25°C
5.2
8.0
Quiescent Current
Change
IO = 5 mA to 1 A
0.5
VI = 17.5 V to 30 V
1.0
Output Voltage Drift(15)
IO = 5 mA
-1
mV/°C
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
90
μV
70
dB
VO
ΔIQ
ΔVO/ΔT
VN
RR
Ripple
Rejection(15)
f = 120 Hz, VI = 18.5 V to 28.5 V
54
V
mV
mV
mA
mA
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(15)
f = 1 kHz
19
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(15)
Notes:
14. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
15. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
9
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7815)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 27 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25°C
17.3
18.0
18.7
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 21 V to 33 V
17.1
18.0
18.9
Regline
Line Regulation(16)
TJ = +25°C
VI = 21 V to 33 V
15
360
VI = 24 V to 30 V
5
180
Regload
Load Regulation(16)
TJ = +25°C
IO = 5 mA to 1.5 A
15
360
IO = 250 mA to 750 mA
5
180
IQ
Quiescent Current
TJ = +25°C
5.2
8.0
Quiescent Current
Change
IO = 5 mA to 1 A
0.5
VI = 21 V to 33 V
1.0
Output Voltage Drift(17)
IO = 5 mA
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
VO
ΔIQ
ΔVO/ΔT
VN
RR
Ripple
Rejection(17)
f = 120 Hz, VI = 22 V to 32 V
53
Unit
V
mV
mV
mA
mA
-1
mV/°C
110
μV
69
dB
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(17)
f = 1 kHz
22
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(17)
Notes:
16. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
17. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
10
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7818)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 33 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
23.00
24.00
25.00
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 27 V to 38 V
22.80
24.00
25.25
Regline
Line Regulation(18)
TJ = +25°C
VI = 27 V to 38 V
17
480
VI = 30 V to 36 V
6
240
Regload
Load Regulation(18)
TJ = +25°C
IO = 5 mA to 1.5 A
15
480
IO = 250 mA to 750 mA
5
240
IQ
Quiescent Current
TJ = +25°C
5.2
8.0
Quiescent Current
Change
IO = 5 mA to 1 A
0.1
0.5
VI = 27 V to 38 V
0.5
1.0
Output Voltage Drift(19)
IO = 5 mA
-1.5
mV/°C
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
120
μV
67
dB
VO
ΔIQ
ΔVO/ΔT
VN
RR
Ripple
Rejection(19)
f = 120 Hz, VI = 28 V to 38 V
50
V
mV
mV
mA
mA
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(19)
f = 1 kHz
28
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
230
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(19)
Notes:
18. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
19. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
11
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7824)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 10 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
VO
Regline
Parameter
Conditions
Output Voltage
Line Regulation(20)
Min.
Typ.
Max.
TJ = +25°C
4.9
5.0
5.1
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 7.5 V to 20 V
4.8
5.0
5.2
VI = 7.5 V to 25 V, IO = 500 mA
5.0
50.0
VI = 8 V to 12 V
3.0
50.0
VI = 7.3 V to 20 V
5.0
50.0
VI = 8 V to 12 V
1.5
25.0
9
100
TJ = +25°C
TJ = +25°C, IO = 5 mA to 1.5 A
Regload
Load Regulation
(20)
IQ
Quiescent Current
ΔIQ
Quiescent Current
Change
ΔVO/ΔT
Output Voltage Drift
(21)
IO = 5 mA to 1 A
9
100
IO = 250 mA to 750 mA
4
50
TJ = +25°C
5
6
IO = 5 mA to 1 A
0.5
VI = 8 V to 25 V, IO = 500 mA
0.8
VI = 7.5 V to 20 V, TJ = +25°C
0.8
IO = 5 mA
Unit
V
mV
mV
mA
mA
-0.8
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
42
μV
RR
Ripple Rejection(21)
f = 120 Hz, VO = 500 mA,
VI =8 V to 18 V
68
dB
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(21)
f = 1 kHz
17
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(21)
Notes:
20. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
21. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
12
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7805A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 15 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
VO
Regline
Parameter
Conditions
Output Voltage
Line Regulation(22)
Min.
Typ.
Max.
TJ = +25°C
8.82
9.00
9.16
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 11.2 V to 24 V
8.65
9.00
9.35
VI = 11.7 V to 25 V, IO = 500 mA
6
90
VI = 12.5 V to 19 V
4
45
VI = 11.5 V to 24 V
6
90
VI = 12.5 V to 19 V
2
45
TJ = +25°C, IO = 5 mA to 1.5 A
12
100
TJ = +25°C
Regload
Load Regulation
(22)
IQ
Quiescent Current
ΔIQ
Quiescent Current
Change
ΔVO/ΔT
Output Voltage Drift
(23)
IO = 5 mA to 1 A
12
100
IO = 250 mA to 750 mA
5
50
TJ = +25°C
5
6
IO = 5 mA to 1 A
0.5
VI = 12 V to 25 V, IO = 500 mA
0.8
VI = 11.7 V to 25 V, TJ = +25°C
0.8
Unit
V
mV
mV
mA
mA
IO = 5 mA
-1
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
58
μV
RR
Ripple Rejection(23)
f = 120 Hz, VO = 500 mA,
VI =12 V to 22 V
62
dB
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(23)
f = 1 kHz
17
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(23)
Notes:
22. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
23. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
13
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7809A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 16 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
VO
Regline
Parameter
Conditions
Output Voltage
Line Regulation(24)
Min.
Typ.
Max.
TJ = +25°C
9.8
10.0
10.2
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 12.8 V to 25 V
9.6
10.0
10.4
VI = 12.8 V to 26 V, IO = 500 mA
8
100
VI = 13 V to 20 V
4
50
VI = 12.5 V to 25 V
8
100
VI = 13 V to 20 V
3
50
TJ = +25°C, IO = 5 mA to 1.5 A
12
100
TJ = +25°C
Regload
Load Regulation
(24)
IQ
Quiescent Current
ΔIQ
Quiescent Current
Change
ΔVO/ΔT
Output Voltage Drift
(25)
IO = 5 mA to 1 A
12
100
IO = 250 mA to 750 mA
5
50
TJ = +25°C
5
6
IO = 5 mA to 1 A
0.5
VI = 12.8 V to 25 V, IO = 500 mA
0.8
VI = 13 V to 26 V, TJ = +25°C
0.5
Unit
V
mV
mV
mA
mA
IO = 5 mA
-1
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
58
μV
RR
Ripple Rejection(25)
f = 120 Hz, VO = 500 mA,
VI =14 V to 24 V
62
dB
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(25)
f = 1 kHz
17
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(25)
Notes:
24. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
25. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
14
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7810A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 19 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
VO
Regline
Parameter
Conditions
Output Voltage
Line Regulation(26)
Min.
Typ.
Max.
TJ = +25°C
11.75
12.00
12.25
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 14.8 V to 27 V
11.50
12.00
12.50
VI = 14.8 V to 30 V, IO = 500 mA
10
120
VI = 16 V to 22 V
4
120
VI = 14.5 V to 27 V
10
120
VI = 16 V to 22 V
3
60
TJ = +25°C, IO = 5 mA to 1.5 A
12
100
TJ = +25°C
Regload
Load Regulation
(26)
IQ
Quiescent Current
ΔIQ
Quiescent Current
Change
ΔVO/ΔT
Output Voltage Drift
(27)
IO = 5 mA to 1 A
12
100
IO = 250 mA to 750 mA
5
50
TJ = +25°C
5
6
IO = 5 mA to 1 A
0.5
VI = 14 V to 27 V, IO = 500 mA
0.8
VI = 15 V to 30 V, TJ = +25°C
0.8
Unit
V
mV
mV
mA
mA
IO = 5 mA
-1
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
76
μV
RR
Ripple Rejection(27)
f = 120 Hz, VO = 500 mA,
VI =14 V to 24 V
60
dB
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(27)
f = 1 kHz
18
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(27)
Notes:
26. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
27. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
15
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7812A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 23 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Symbol
VO
Regline
Parameter
Conditions
Output Voltage
Line Regulation(28)
Min.
Typ.
Max.
TJ = +25°C
14.75
15.00
15.30
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = 17.7 V to 30 V
14.40
15.00
15.60
VI = 17.4 V to 30 V, IO = 500 mA
10
150
VI = 20 V to 26 V
5
150
VI = 17.5 V to 30 V
11
150
VI = 20 V to 26 V
3
75
TJ = +25°C, IO = 5 mA to 1.5 A
12
100
IO = 5 mA to 1 A
12
100
IO = 250 mA to 750 mA
5
50
5.2
6.0
TJ = +25°C
Regload
Load Regulation
(28)
IQ
Quiescent Current
ΔIQ
Quiescent Current
Change
ΔVO/ΔT
Output Voltage Drift
TJ = +25°C
(29)
IO = 5 mA to 1 A
0.5
VI = 17.5 V to 30 V, IO = 500 mA
0.8
VI = 17.5 V to 30 V, TJ = +25°C
0.8
Unit
V
mV
mV
mA
mA
IO = 5 mA
-1
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
90
μV
RR
Ripple Rejection(29)
f = 120 Hz, VO = 500 mA,
VI =18.5 V to 28.5 V
58
dB
Dropout Voltage
IO = 1 A, TJ = +25°C
2
V
RO
Output Resistance(29)
f = 1 kHz
19
mΩ
ISC
Short-Circuit Current
VI = 35 V, TJ = +25°C
250
mA
TJ = +25°C
2.2
A
VDROP
IPK
Peak Current
(29)
Notes:
28. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
29. These parameters, although guaranteed, are not 100% tested in production.
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
16
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Electrical Characteristics (LM7815A)
5.75
3
VI = 10V
VO = 5V
IO = 5mA
5.5
5.25
5
4.75
2
1.5
1
.5
4.5
-50
-25
0
25
50
75
100
0
125
JUNCTION TEMPERATURE (°C)
QUIESCENT CURRENT (mA)
NORMALIZED OUTPUT VOLTAGE (V)
7
1.01
1
0.99
-25
0
25
50
75
100
10
15
20
25
30
35
TJ = 25°C
VO = 5V
IO = 10mA
6.5
6
5.5
5
4.5
4
125
JUNCTION TEMPERATURE (°C)
5
10
15
20
25
30
35
INPUT VOLTAGE (V)
Figure 4. Output Voltage
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
5
Figure 3. Peak Output Current
VI – VO = 5V
IO = 5mA
0.98
-50
0
INPUT-OUTPUT DIFFERENTIAL (V)
Figure 2. Quiescent Current
1.02
TJ = 25°C
ΔVO = 100mV
2.5
OUTPUT CURRENT (A)
QUIESCENT CURRENT (mA)
6
Figure 5. Quiescent Current
www.fairchildsemi.com
17
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Typical Performance Characteristics
1
LM78XX
Input
2
CI
0.33μF
3
Output
CO
0.1μF
Figure 6. DC Parameters
1
LM78XX
Input
3
Output
2
270pF
RL
VO
2N6121
or EQ
0.33μF
VO
100Ω
0V
30μS
Figure 7. Load Regulation
5.1Ω
1
LM78XX
Input
3
Output
0.33μF
2
RL
470μF
120Hz
+
Figure 8. Ripple Rejection
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
18
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Typical Applications
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Typical Applications
(Continued)
1
LM78XX
Input
CI
2
3
Output
CO
0.33μF
0.1μF
Figure 9. Fixed-Output Regulator
1
Input
CI
3
LM78XX
2
CO
0.33μF
Output
V XX
0.1μF
R1
IQ
IO
RL
V XX
IO =
+
R1 IQ
Figure 10. Constant Current Regulator
Notes:
29. To specify an output voltage, substitute voltage value for “XX”. A common ground is required between the input and
the output voltage. The input voltage must remain typically 2.0 V above the output voltage even during the low point
on the input ripple voltage.
30. CI is required if regulator is located an appreciable distance from power supply filter.
31. CO improves stability and transient response.
1
Input
CI
2
0.33μF
Output
3
LM78XX
CO
0.1μF
V XX
R1
IQ
R2
IRI ≥ 5 IQ
VO = VXX(1 + R2 / R1) + IQR2
Figure 11. Circuit for Increasing Output Voltage
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
19
(Continued)
Input
1
LM7805
Output
3
2
CI
0.33μF
- 2
LM741
+ 3
4
6
CO
0.1μF
10kΩ
IRI ≥ 5 IQ
VO = VXX(1 + R2 / R1) + IQR2
Figure 12. Adjustable Output Regulator (7 V to 30 V)
Q1 BD536
Input
IQ1
R1
1
3Ω
R1 =
IO
IREG
V BEQ1
Output
3
LM78XX
2
0.1μF
0.33μF
IREG–IQ1/ BQ1
IO = IREG + BQ1 (IREG–VBEQ1/R1)
Figure 13. High-Current Voltage Regulator
Input
Q1
RSC
Q2
R1
1
LM78XX
3
Output
3Ω
0.33μF
Q1 = TIP42
Q2 = TIP42
RSC =
2
0.1μF
V BEQ2
I SC
Figure 14. High Output Current with Short-Circuit Protection
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
20
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Typical Applications
(Continued)
1
3
LM78XX
VI
VO
2
0.33μF
0.1μF
7
COMMON
6
COMMON
2
LM741
4
-VIN
_
4.7kΩ
+
3
4.7kΩ
-VO
TIP42
Figure 15. Tracking Voltage Regulator
1
3
LM7815
+20V
+15V
0.33μF
+
2
0.1μF
1N4001
2.2μF
1μF +
1
2
-20V
1N4001
3
MC7915
-15V
Figure 16. Split Power Supply (±15 V - 1 A)
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
21
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Typical Applications
(Continued)
Output
Input
+
0.1μF
2
1
3
LM78XX
Figure 17. Negative Output Voltage Circuit
D45H11
Input
1mH
Output
470Ω
4.7Ω
Z1
1
+
0.33μF
LM78XX
3
2
10μF
+
0.5Ω
2000μF
Figure 18. Switching Regulator
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
22
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Typical Applications
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
Physical Dimensions
Figure 19. TO-220, MOLDED, 3-LEAD, JEDEC VARIATION AB (ACTIVE)
© 2006 Fairchild Semiconductor Corporation
LM78XX / LM78XXA Rev. 1.3.1
www.fairchildsemi.com
23
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
MotionGrid®
MTi®
MTx®
MVN®
mWSaver®
OptoHiT¥
AccuPower¥
Awinda®
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FAST®
FastvCore¥
FETBench¥
FPS¥
®*
®
®
PowerTrench
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
Sync-Lock™
TinyBoost®
TinyBuck®
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
μSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
Xsens™
❺™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE
AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
2. A critical component in any component of a life support, device, or
intended for surgical implant into the body or (b) support or sustain
system whose failure to perform can be reasonably expected to
life, and (c) whose failure to perform when properly used in
cause the failure of the life support device or system, or to affect its
accordance with instructions for use provided in the labeling, can be
safety or effectiveness.
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I71
© Fairchild Semiconductor Corporation
www.fairchildsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
工商网监
湘ICP备2023018690号
