LMV358AMU8X

• • • • • • • • • • 80 μA Supply Current per Channel 1.2 MHz Gain Bandwidth Product Output Voltage Range: 0.01 V to 2.69 V Input Voltage Range: -0.25 V to +1.5 V 1.5 V/μs Slew Rate LMV321 Directly Replaces Other Industry Standard LMV321 Amplifiers: Available in SC70-5 and SOT23-5 Packages LMV358 Directly Replaces Other Industry Standard LMV358 Amplifiers: Available in MSOP-8 and SOIC-8 Packages LMV324 Directly Replaces Other Industry Standard LMV324 Amplifiers: Available in SOIC-14 Packages Fully Specified at +2.7 V and +5 V Supplies Operating Temperature Range: -40°C to +125°C Applications • • • • • • • • • • • • • • Low Cost General-Purpose Applications Cellular Phones Personal Data Assistants A/D Buffer DSP Interface Smart Card Readers Portable Test Instruments Keyless Entry Infrared Receivers for Remote Controls Telephone Systems Audio Applications Digital Still Cameras Hard Disk Drives MP3 Players Description The LMV321 (single), LMV358 (dual), and LMV324 (quad) are a low cost, voltage feedback amplifiers that consume only 80 μA of supply current per amplifier. The LMV3XX family is designed to operate from 2.7 V (±1.35 V) to 5.5 V (±2.75 V) supplies. The common mode voltage range extends below the negative rail and the output provides rail-to-rail performance. The LMV3XX family is designed on a CMOS process and provides 1.2 MHz of bandwidth and 1.5 V/μs of slew rate at a low supply voltage of 2.7 V. The combination of low power, rail-to-rail performance, low voltage operation, and tiny pack-age options make the LMV3XX family well suited for use in personal electronics equipment such as cellular handsets, pagers, PDAs, and other battery powered applications. Frequency Response vs. CL CL = 200pF Rs = 0 Magnitude (1dB/div) Features at +2.7V CL = 50pF Rs = 0 + CL = 200pF Rs = 225Ω CL = 100pF Rs = 0 CL = 10pF Rs = 0 CL = 20pF Rs = 0 CL = 2pF Rs = 0 Rs - CL 10kΩ 2kΩ 10kΩ 0.01 0.1 1 10 Frequency (MHz) Typical Application +Vs 6.8μF + +In + 0.01μF Out LMV3XX - Rf Rg © 2002 Semiconductor Components Industries, LLC. November-2017, Rev. 3 Publication Order Number: LMV358/D LMV321 / LMV358 / LMV324 — General-Purpose, Low Voltage, Rail-to-Rail Output Amplifiers LMV321 / LMV358 / LMV324 General-Purpose, Low Voltage, Rail-to-Rail Output Amplifiers Product Number Package Packing Method LMV321AP5X SC70 5L Tape and Reel, 3000pcs LMV321AS5X SOT-23 5L Tape and Reel, 3000pcs LMV358AM8X SOIC 8L (Narrow) Tape and Reel, 2500pcs LMV358AMU8X MSOP 8L Tape and Reel, 3000pcs LMV324AM14X SOIC 14L Tape and Reel, 2500pcs Pin Assignments LMV321 SC70-5 SOT23-5 +In 1 -Vs 2 -In 3 5 +Vs +In 1 -Vs 2 -In 3 + 5 +Vs 4 Out 8 +Vs 7 Out2 6 -In2 5 +In2 + – 4 Out – LMV358 MSOP-8 SOIC-8 Out1 1 -In1 2 +In1 3 -Vs 4 + + 8 +Vs Out1 1 7 Out2 -In1 2 6 -In2 +In1 3 5 +In2 -Vs 4 + LMV324 SOIC-14 -In1 2 +In1 3 +Vs 4 +In2 5 14 Out4 - - + + + - -In2 6 Out2 7 13 -In4 12 +In4 11 -Vs - 1 + Out1 10 +In3 9 -In3 8 Out3 www.onsemi.com 2 + Operating Temperature -40 to +125°C LMV321 / LMV358 / LMV324 — General-Purpose, Low Voltage, Rail-to-Rail Output Amplifiers Ordering Information Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Parameter Min. Max. Unit Supply Voltage 0 +6 V Maximum Junction Temperature - +175 °C -65 +150 °C Storage Temperature Range - +260 °C -VS -0.5 +VS +0.5 V Min. Max. Unit Operating Temperature Range -40 +125 °C Power Supply Operating Range 2.5 5.5 V Lead Temperature, 10 Seconds Input Voltage Range Recommended Operating Conditions Parameter Package Thermal Resistance Package 5 Lead SC70 θJA Unit 331.4 °C/W 5 Lead SOT23 256 °C/W 8 Lead SOIC 152 °C/W 8 Lead MSOP 206 °C/W 14 Lead SOIC 88 °C/W www.onsemi.com 3 LMV321 / LMV358 / LMV324 — General-Purpose, Low Voltage, Rail-to-Rail Output Amplifiers Absolute Maximum Ratings TC = 25°C, VS = +2.7 V, G = 2, RL = 10 kΩ to VS/2, Rf = 10 kΩ, VO(DC) = VCC/2, unless otherwise noted. Parameter Conditions Min. Typ. Max. Unit AC Performance Gain Bandwidth Product CL= 50 pF, RL= 2 kΩ to VS/2 Phase Margin Gain Margin 1.2 MHz 52 deg 17 dB Slew Rate VO = 1VPP 1.5 V/μs Input Voltage Noise >50 kHz 36 nV/√Hz LMV358 100 kHz 91 LMV324 100 kHz 80 Crosstalk dB DC Performance Input Offset Voltage(1) 1.7 7.0 mV Average Drift 8 μV/°C Input Bias Current(2)