0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
LP2950ACDT-3RKG

LP2950ACDT-3RKG

  • 厂商:

    ONSEMI(安森美)

  • 封装:

    TO252

  • 描述:

    IC REG LINEAR 3V 100MA DPAK

  • 数据手册
  • 价格&库存
LP2950ACDT-3RKG 数据手册
DATA SHEET www.onsemi.com Voltage Regulator - Low Power Low, Dropout TO−92 CASE 29−10 100 mA LP2950, LP2951, NCV2951 The LP2950 and LP2951 are micropower voltage regulators that are specifically designed to maintain proper regulation with an extremely low input−to−output voltage differential. These devices feature a very low quiescent bias current of 75 mA and are capable of supplying output currents in excess of 100 mA. Internal current and thermal limiting protection is provided. The LP2951 has three additional features. The first is the Error Output that can be used to signal external circuitry of an out of regulation condition, or as a microprocessor power−on reset. The second feature allows the output voltage to be preset to 5.0 V, 3.3 V or 3.0 V output (depending on the version) or programmed from 1.25 V to 29 V. It consists of a pinned out resistor divider along with direct access to the Error Amplifier feedback input. The third feature is a Shutdown input that allows a logic level signal to turn−off or turn−on the regulator output. Due to the low input−to−output voltage differential and bias current specifications, these devices are ideally suited for battery powered computer, consumer, and industrial equipment where an extension of useful battery life is desirable. The LP2950 is available in the three pin case 29 and DPAK packages, and the LP2951 is available in the eight pin dual−in−line, SOIC−8 and Micro8 surface mount packages. The ‘A’ suffix devices feature an initial output voltage tolerance ± 0.5%. Features • Low Quiescent Bias Current of 75 mA • Low Input−to−Output Voltage Differential of 50 mV at 100 mA and • • • • • • 380 mV at 100 mA 5.0 V, 3.3 V or 3.0 V ± 0.5% Allows Use as a Regulator or Reference Extremely Tight Line and Load Regulation Requires Only a 1.0 mF Output Capacitor for Stability Internal Current and Thermal Limiting NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable These Devices are Pb−Free and RoHS Compliant 1 12 3 STRAIGHT LEAD 2 3 BENT LEAD PIN CONNECTIONS 4 1 2 Pin: 1. Output 2. Ground 3. Input Pin: 1. Input 2. Ground 3. Output 3 1 DPAK CASE 369C 2 3 (Top View) Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. 8 1 SOIC−8 CASE 751 PDIP−8 CASE 626 8 1 8 1 Micro8 CASE 846A PIN CONNECTIONS Output 1 8 Input Sense 2 7 Feedback Shutdown 3 6 VO Tap GND 4 5 Error Output (Top View) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on pages 14 and 15 of this data sheet. DEVICE MARKING INFORMATION LP2951 Additional Features See general marking information in the device marking section on page 16 of this data sheet. • Error Output Signals an Out of Regulation Condition • Output Programmable from 1.25 V to 29 V • Logic Level Shutdown Input (See Following Page for Device Information.) © Semiconductor Components Industries, LLC, 1995 October, 2021 − Rev. 34 1 Publication Order Number: LP2950/D LP2950, LP2951, NCV2951 DEVICE INFORMATION Output Voltage Package 3.0 V 3.3 V 5.0 V Adjustable Operating Ambient Temperature Range TO−92 Suffix Z LP2950CZ−3.0 LP2950ACZ−3.0 LP2950CZ−3.3 LP2950ACZ−3.3 LP2950CZ−5.0 LP2950ACZ−5.0 Not Available TA = −40° to +125°C DPAK Suffix DT LP2950CDT−3.0 LP2950ACDT−3.0 LP2950CDT−3.3 LP2950ACDT−3.3 LP2950CDT−5.0 LP2950ACDT−5.0 Not Available TA = −40° to +125°C NCV2951ACD−3.3R2 NCV2951ACDR2 NCV2951CDR2 TA = −40° to +125°C − SOIC−8 SOIC−8 Suffix D LP2951CD−3.0 LP2951ACD−3.0 LP2951CD−3.3 LP2951ACD−3.3 LP2951CD LP2951ACD LP2951CD LP2951ACD TA = −40° to +125°C Micro8 Suffix DM LP2951CDM−3.0 LP2951ACDM−3.0 LP2951CDM−3.3 LP2951ACDM−3.3 LP2951CDM LP2951ACDM LP2951CDM LP2951ACDM TA = −40° to +125°C DIP−8 Suffix N LP2951CN−3.0 LP2951ACN−3.0 LP2951CN−3.3 LP2951ACN−3.3 LP2951CN LP2951ACN LP2951CN LP2951ACN TA = −40° to +125°C LP2950Cx−xx / LP2951Cxx−xx LP2950ACx−xx / LP2951ACxx−xx 1% Output Voltage Precision at TA = 25°C 0.5% Output Voltage Precision at TA = 25°C Input Battery or Unregulated DC Output 182 k Error Amplifier 60 k 1.23 V Reference GND Input Battery or Unregulated DC 5.0 V/100 mA 1.0 mF 1 3 LP2950CZ−5.0 2 8 Output 1 Sense 5.0 V/100 mA 2 182 k 1.0 mF VO Tap 6 60 k 7 From 3 CMOS/TTL Feedback Error Amplifier Shutdown 330 k 60 k 50 k 75 mV/ 60 mV Error Output To CMOS/TTL 5 Error Detection Comparator 1.23 V Reference GND 4 LP2951CD or CN This device contains 34 active transistors. Figure 1. Representative Block Diagrams www.onsemi.com 2 LP2950, LP2951, NCV2951 MAXIMUM RATINGS (TA = 25°C, unless otherwise noted.) Rating Input Voltage Symbol Value Unit VCC 30 Vdc ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Peak Transient Input Voltage (t < 300 ms) VCC 32 Vdc PD Internally Limited W Thermal Resistance, Junction−to−Ambient RqJA 180 °C/W Thermal Resistance, Junction−to−Case RqJC 45 °C/W Power Dissipation and Thermal Characteristics Maximum Power Dissipation Case 751(SOIC−8) D Suffix Case 369A (DPAK) DT Suffix (Note 1) Thermal Resistance, Junction−to−Ambient RqJA 92 °C/W Thermal Resistance, Junction−to−Case RqJC 6.0 °C/W Thermal Resistance, Junction−to−Ambient RqJA 160 °C/W Thermal Resistance, Junction−to−Case RqJC 83 °C/W RqJA 105 °C/W RqJA 240 °C/W Feedback Input Voltage Vfb −1.5 to +30 Vdc Shutdown Input Voltage Vsd −0.3 to +30 Vdc Error Comparator Output Voltage Verr −0.3 to +30 Vdc Operating Ambient Temperature Range TA −40 to +125 °C Maximum Die Junction Temperature Range TJ +150 °C Storage Temperature Range Tstg −65 to +150 °C Case 29 (TO−226AA/TO−92) Z Suffix Case 626 N Suffix Thermal Resistance, Junction−to−Ambient Case 846A (Micro8) DM Suffix Thermal Resistance, Junction−to−Ambient Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. www.onsemi.com 3 LP2950, LP2951, NCV2951 ELECTRICAL CHARACTERISTICS (Vin = VO + 1.0 V, IO = 100 mA, CO = 1.0 mF, TA = 25°C [Note 3], unless otherwise noted.) Characteristic Symbol Output Voltage, 5.0 V Versions Min Typ Max VO Unit V Vin = 6.0 V, IO = 100 mA, TA = 25°C LP2950C−5.0/LP2951C/NCV2951C* 4.950 5.000 5.050 LP2950AC−5.0/LP2951AC/NCV2951AC* 4.975 5.000 5.025 LP2950C−5.0/LP2951C/NCV2951C* 4.900 − 5.100 LP2950AC−5.0/LP2951AC/NCV2951AC* 4.940 − 5.060 LP2950C−5.0/LP2951C/NCV2951C* 4.880 − 5.120 LP2950AC−5.0/LP2951AC/NCV2951AC* 4.925 − 5.075 TA = − 40 to +125°C Vin = 6.0 to 30 V, IO = 100 mA to 100 mA, TA = − 40 to +125°C Output Voltage, 3.3 V Versions VO V Vin = 4.3 V, IO = 100 mA, TA = 25°C LP2950C−3.3/LP2951C−3.3 3.267 3.300 3.333 LP2950AC−3.3/LP2951AC−3.3/NCV2951AC−3.3* 3.284 3.300 3.317 LP2950C−3.3/LP2951C−3.3 3.234 − 3.366 LP2950AC−3.3/LP2951AC−3.3/NCV2951AC−3.3* 3.260 − 3.340 LP2950C−3.3/LP2951C−3.3 3.221 − 3.379 LP2950AC−3.3/LP2951AC−3.3/NCV2951AC−3.3* 3.254 − 3.346 TA = − 40 to +125°C Vin = 4.3 to 30 V, IO = 100 mA to 100 mA, TA = − 40 to +125°C Output Voltage, 3.0 V Versions VO V Vin = 4.0 V, IO = 100 mA, TA = 25°C LP2950C−3.0/LP2951C−3.0 2.970 3.000 3.030 LP2950AC−3.0/LP2951AC−3.0 2.985 3.000 3.015 LP2950C−3.0/LP2951C−3.0 2.940 − 3.060 LP2950AC−3.0/LP2951AC−3.0 2.964 − 3.036 LP2950C−3.0/LP2951C−3.0 2.928 − 3.072 LP2950AC−3.0/LP2951AC−3.0 2.958 − 3.042 TA = − 40 to +125°C Vin = 4.0 to 30 V, IO = 100 mA to 100 mA, TA = − 40 to +125°C Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. The Junction−to−Ambient Thermal Resistance is determined by PCB copper area per Figure 29. 2. This device series contains ESD protection and exceeds the following tests: Human Body Model (HBM), 2000 V, Class 2, JESD22 A114−C Machine Model (MM), 200 V, Class B, JESD22 A115−A Charged Device Model (CDM), 2000 V, Class IV, JESD22 C101−C 3. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. 4. VO(nom) is the part number voltage option. 5. Noise tests on the LP2951 are made with a 0.01 mF capacitor connected across Pins 7 and 1. 6. Latch−up Current Maximum Rating tested per JEDEC standard: JESD78 − Inputs Low: passing positive current 100 mA and negative current −100 mA − Inputs High: passing positive current 100 mA and negative current −10 mA. *NCV prefix is for automotive and other applications requiring site and change control. www.onsemi.com 4 LP2950, LP2951, NCV2951 ELECTRICAL CHARACTERISTICS (continued) (Vin = VO + 1.0 V, IO = 100 mA, CO = 1.0 mF, TA = 25°C [Note 9], unless otherwise noted.) Characteristic Symbol Min Typ Max − − 0.08 0.04 0.20 0.10 − − 0.13 0.05 0.20 0.10 − − 30 350 80 450 − − 93 4.0 120 12 mA mA ICCdropout − 110 170 mA ILimit − 220 300 mA Regthermal − 0.05 0.20 %/W − − 126 56 − − 1.210 1.220 1.235 1.235 1.260 1.250 1.200 1.200 − − 1.270 1.260 Line Regulation (Vin = VO(nom) +1.0 V to 30 V) (Note 10) LP2950C−XX/LP2951C/LP2951C−XX/NCV2951C* LP2950AC−XX/LP2951AC/LP2951AC−XX/NCV2951AC* Regline Load Regulation (IO = 100 mA to 100 mA) LP2950C−XX/LP2951C/LP2951C−XX/NCV2951C* LP2950AC−XX/LP2951AC/LP2951AC−XX/NCV2951AC* Regload Dropout Voltage IO = 100 mA IO = 100 mA VI − VO Supply Bias Current IO = 100 mA IO = 100 mA ICC Dropout Supply Bias Current (Vin = VO(nom) − 0.5 V, IO = 100 mA) (Note 10) Current Limit (VO Shorted to Ground) Thermal Regulation Output Noise Voltage (10 Hz to 100 kHz) (Note 11) CL = 1.0 mF CL = 100 mF Vn Unit % % mV mVrms LP2951A/LP2951AC Only Reference Voltage (TA = 25°C) LP2951C/LP2951C−XX/NCV2951C* LP2951AC/LP2951AC−XX/NCV2951AC* Vref Reference Voltage (TA = − 40 to +125°C) LP2951C/LP2951C−XX/NCV2951C* LP2951AC/LP2951AC−XX/NCV2951AC* Vref Reference Voltage (TA = − 40 to +125°C) IO = 100 mA to 100 mA, Vin = 23 to 30 V LP2951C/LP2951C−XX/NCV2951C* LP2951AC/LP2951AC−XX/NCV2951AC* Vref Feedback Pin Bias Current V V V 1.185 1.190 − − 1.285 1.270 IFB − 15 40 nA Output Leakage Current (VOH = 30 V) Ilkg − 0.01 1.0 mA Output Low Voltage (Vin = 4.5 V, IOL = 400 mA) VOL − 150 250 mV Upper Threshold Voltage (Vin = 6.0 V) Vthu 40 45 − mV Lower Threshold Voltage (Vin = 6.0 V) Vthl − 60 95 mV Hysteresis (Vin = 6.0 V) Vhy − 15 − mV 0 2.0 − − 0.7 30 − − 35 450 50 600 − 3.0 10 Error Comparator Shutdown Input Input Logic Voltage Logic “0” (Regulator “On”) Logic “1” (Regulator “Off”) Vshtdn Shutdown Pin Input Current Vshtdn = 2.4 V Vshtdn = 30 V Ishtdn Regulator Output Current in Shutdown Mode (Vin = 30 V, Vshtdn = 2.0 V, VO = 0, Pin 6 Connected to Pin 7) Ioff V mA mA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 7. The Junction−to−Ambient Thermal Resistance is determined by PCB copper area per Figure 29. 8. ESD data available upon request. 9. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. 10. VO(nom) is the part number voltage option. 11. Noise tests on the LP2951 are made with a 0.01 mF capacitor connected across Pins 7 and 1. *NCV prefix is for automotive and other applications requiring site and change control. www.onsemi.com 5 LP2950, LP2951, NCV2951 DEFINITIONS Output Noise Voltage − The RMS ac voltage at the output, with constant load and no input ripple, measured over a specified frequency range. Leakage Current − Current drawn through a bipolar transistor collector−base junction, under a specified collector voltage, when the transistor is “off”. Upper Threshold Voltage − Voltage applied to the comparator input terminal, below the reference voltage which is applied to the other comparator input terminal, which causes the comparator output to change state from a logic “0” to “1”. Lower Threshold Voltage − Voltage applied to the comparator input terminal, below the reference voltage which is applied to the other comparator input terminal, which causes the comparator output to change state from a logic “1” to “0”. Hysteresis − The difference between Lower Threshold voltage and Upper Threshold voltage. Dropout Voltage − The input/output voltage differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 100 mV below its nominal value (which is measured at 1.0 V differential), dropout voltage is affected by junction temperature, load current and minimum input supply requirements. Line Regulation − The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Load Regulation − The change in output voltage for a change in load current at constant chip temperature. Maximum Power Dissipation − The maximum total device dissipation for which the regulator will operate within specifications. Bias Current − Current which is used to operate the regulator chip and is not delivered to the load. 6.0 LP2951C TA = 25°C 5.0 Vout , OUTPUT VOLTAGE (V) LP2950/LP2951 BIAS CURRENT (mA) 10 1.0 0.1 0.01 0.1 1.0 10 4.0 RL = 50 W 3.0 2.0 1.0 0 100 RL = 50 kW 0 1.0 2.0 3.0 4.0 5.0 IL, LOAD CURRENT (mA) Vin, INPUT VOLTAGE (V) Figure 2. Quiescent Current Figure 3. 5.0 V Dropout Characteristics over Load 6.0 6.0 5.00 4.99 Vout , OUTPUT VOLTAGE (V) Vout , OUTPUT VOLTAGE (V) LP2951C 5.0 4.98 4.97 4.96 4.0 3.0 2.0 25°C 1.0 LP2951C 4.95 -50 125°C −40°C 0 0 50 100 200 150 0 1.0 2.0 3.0 4.0 5.0 TA, AMBIENT TEMPERATURE (°C) Vin, INPUT VOLTAGE (V) Figure 4. Output Voltage versus Temperature Figure 5. 5.0 V Dropout Characteristics with RL = 50 W www.onsemi.com 6 6.0 LP2950, LP2951, NCV2951 400 250 350 DROPOUT VOLTAGE (mV) BIAS CURRENT (μ A) 200 0.1 mA Load Current 150 100 No Load 50 TA = 25°C 300 250 200 150 100 50 0 0.1 0 0 5.0 10 15 20 25 1.0 Figure 6. Input Current 45 RL = 50 40 400 35 RL = 50 k 300 -50 0 50 Vout , OUTPUT VOLTAGE (V) 50 500 DROPOUT VOLTAGE (mV) R L= 50 k DROPOUT VOLTAGE (mV) R L= 50 5.0 55 350 30 150 100 4.0 LP2951C RL = 330 k TA = 25°C Vin Decreasing 3.0 Vin Increasing 2.0 1.0 0 4.70 4.74 T, TEMPERATURE (°C) -2.0 6.5 TA = 25°C CL = 1.0 mF IL = 1.0 mA VO = 5.0 V 5.5 0 100 200 300 400 -4.0 500 600 700 -6.0 800 SHUTDOWN AND OUTPUT VOLTAGE (V) 0 Vout OUTPUT VOLTAGE CHANGE (mV) Vin , INPUT VOLTAGE (V) 2.0 7.5 6.0 4.82 4.86 4.90 Figure 9. Error Comparator Output 4.0 Vin 7.0 4.78 Vin, INPUT VOLTAGE (V) Figure 8. Dropout Voltage versus Temperature 8.0 100 Figure 7. Dropout Voltage versus Output Current 550 450 10 IO, OUTPUT CURRENT (mA) Vin, INPUT VOLTAGE (V) 6.0 5.0 CL = 1.0 mF 4.0 CL = 10 mF 3.0 2.0 1.0 Shutdown Input TA = 25°C IL = 10 mA Vin = 8.0 V Vout = 5.0 V 0 -1.0 -100 0 100 200 300 t, TIME (ms) t, TIME (ms) Figure 10. Line Transient Response Figure 11. LP2951 Enable Transient www.onsemi.com 7 400 LP2950, LP2951, NCV2951 200 200 Vout 100 0 50 -200 ILoad 0 RIPPLE REJECTION (dB) LOAD CURRENT (mA) 150 400 OUTPUT VOLTAGE CHANGE (mV) 80 CL = 1.0 mF Vout = 5.0 V IL = 400 mA to 75 mA TA = 25°C 60 IL= 0.1 mA 40 TA = 25°C CL = 1.0 mF Vin = 6.0 V Vout = 5.0 V 20 -400 -50 0 0.5 1 1.5 2 2.5 3 3.5 0 1.0 4 10 CL = 1.0 mF 2.0 CL = 100 mF 10 k Vout , OUTPUT CURRENT (mA) Output “Off" 1.2 Output “On" 1.0 0 20 40 60 80 100 120 140 f, FREQUENCY (Hz) t, TEMPERATURE (°C) Figure 14. Output Noise Figure 15. Shutdown Threshold Voltage versus Temperature TA = 25°C 80 2.0 TA = 75°C 60 0 40 -2.0 20 -4.0 LP2951CN 5.0 1.4 0.8 -40 -20 10 15 20 25 30 35 160 10000 4.0 0 1.6 100 k 100 0 1.8 SHUTDOWN THRESHOLD VOLTAGE (V) IL= 100 mA TA = 25°C VO = 5.0 V LP2951C 3.0 1.0 k 100 k Figure 13. Ripple Rejection Vout = 5 V OUTPUT VOLTAGE CHANGE (mV) ESR (ohms) VOLTAGE NOISE (μ V/√ Hz) 4.0 0 100 10 k f, FREQUENCY (Hz) Figure 12. Load Transient Response 1.0 1.0 k 100 t, TIME (ms) 1000 -6.0 40 Unstable Region 100 Stable Region 10 1 0.1 mF Unstable Region for 0.1 mF capacitor only 0.1 0.01 100 mF Lower unstable region is for 0.1 mF only. 1 mF and 100 mF show no instability with low ESR values. 0 Vin, INPUT VOLTAGE (V) 10 20 30 40 50 60 70 80 90 100 Output Current (mA) Figure 16. Maximum Rated Output Current Figure 17. Output Stability versus Output Capacitor Change www.onsemi.com 8 LP2950, LP2951, NCV2951 APPLICATIONS INFORMATION Introduction to the LP2951 is ramped up and down. The ERROR signal becomes valid (low) at about 1.3 V input. It goes high when the input reaches about 5.0 V (Vout exceeds about 4.75 V). Since the LP2951’s dropout voltage is dependent upon the load current (refer to the curve in the Typical Performance Characteristics), the input voltage trip point will vary with load current. The output voltage trip point does not vary with load. The error comparator output is an open collector which requires an external pullup resistor. This resistor may be returned to the output or some other voltage within the system. The resistance value should be chosen to be consistent with the 400 mA sink capability of the error comparator. A value between 100 kW and 1.0 MW is suggested. No pullup resistance is required if this output is unused. When operated in the power down mode (Vin = 0 V), the error comparator output will go high if it has been pulled up to an external supply (the output transistor is in high impedance state). To avoid this invalid response, the error comparator output should be pulled up to Vout (see Figure 18). The LP2950/LP2951 regulators are designed with internal current limiting and thermal shutdown making them user−friendly. Typical application circuits for the LP2950 and LP2951 are shown in Figures 20 through 28. These regulators are not internally compensated and thus require a 1.0 mF (or greater) capacitance between the LP2950/LP2951 output terminal and ground for stability. Most types of aluminum, tantalum or multilayer ceramic will perform adequately. Solid tantalums or appropriate multilayer ceramic capacitors are recommended for operation below 25°C. At lower values of output current, less output capacitance is required for output stability. The capacitor can be reduced to 0.33 mF for currents less than 10 mA, or 0.1 mF for currents below 1.0 mA. Using the 8 pin versions at voltages less than 5.0 V operates the error amplifier at lower values of gain, so that more output capacitance is needed for stability. For the worst case operating condition of a 100 mA load at 1.23 V output (output Pin 1 connected to the feedback Pin 7) a minimum capacitance of 3.3 mF is recommended. The LP2950 will remain stable and in regulation when operated with no output load. When setting the output voltage of the LP2951 with external resistors, the resistance values should be chosen to draw a minimum of 1.0 mA. A bypass capacitor is recommended across the LP2950/LP2951 input to ground if more than 4 inches of wire connects the input to either a battery or power supply filter capacitor. Input capacitance at the LP2951 Feedback Pin 7 can create a pole, causing instability if high value external resistors are used to set the output voltage. Adding a 100 pF capacitor between the Output Pin 1 and the Feedback Pin 7 and increasing the output filter capacitor to at least 3.3 mF will stabilize the feedback loop. 5.0 V 4.75 V Output Voltage ERROR Not Valid Not Valid 4.75 V + Vdropout Input Voltage Error Detection Comparator The comparator switches to a positive logic low whenever the LP2951 output voltage falls more than approximately 5.0% out of regulation. This value is the comparator’s designed−in offset voltage of 60 mV divided by the 1.235 V internal reference. As shown in the representative block diagram. This trip level remains 5.0% below normal regardless of the value of regulated output voltage. For example, the error flag trip level is 4.75 V for a normal 5.0 V regulated output, or 9.50 V for a 10 V output voltage. Figure 2 is a timing diagram which shows the ERROR signal and the regulated output voltage as the input voltage 4.70 V 1.3 V Pullup to Ext Pullup to Vout 4.70 V + Vdropout 1.3 V Figure 18. ERROR Output Timing Programming the Output Voltage (LP2951) The LP2951CX may be pin−strapped for the nominal fixed output voltage using its internal voltage divider by tying Pin 1 (output) to Pin 2 (sense) and Pin 7 (feedback) to Pin 6 (5.0 V tap). Alternatively, it may be programmed for any output voltage between its 1.235 reference voltage and its 30 V maximum rating. An external pair of resistors is required, as shown in Figure 19. www.onsemi.com 9 LP2950, LP2951, NCV2951 for reducing noise on the 3 lead LP2950. However, increasing the capacitor from 1.0 mF to 220 mF only decreases the noise from 430 mV to 160 mVrms for a 100 kHz bandwidth at the 5.0 V output. Noise can be reduced fourfold by a bypass capacitor across R1, since it reduces the high frequency gain from 4 to unity. Pick Vin 100 k Error Output 5 8 Vin Vout Error SNS Shutdown Input 3 SD VO T 1 2 Vout 1.23 to 30 V NC 6 NC R1 0.01 mF C 3.3 mF R2 Figure 19. Adjustable Regulator 1 2pR1 x 200 Hz Unregulated Input The complete equation for the output voltage is: V + V (1 ) R1ńR2) ) I R1 ref [ or about 0.01 mF. When doing this, the output capacitor must be increased to 3.3 mF to maintain stability. These changes reduce the output noise from 430 mV to 126 mVrms for a 100 kHz bandwidth at 5.0 V output. With bypass capacitor added, noise no longer scales with output voltage so that improvements are more dramatic at higher output voltages. GND FB 4 7 out Bypass MTB23P06E 1.0 mF 10 k 0.01 mF FB where Vref is the nominal 1.235 V reference voltage and IFB is the feedback pin bias current, nominally − 20 nA. The minimum recommended load current of 1.0 mA forces an upper limit of 1.2 MW on the value of R2, if the regulator must work with no load. IFB will produce a 2% typical error in Vout which may be eliminated at room temperature by adjusting R1. For better accuracy, choosing R2 = 100 k reduces this error to 0.17% while increasing the resistor program current to 12 mA. Since the LP2951 typically draws 75 mA at no load with Pin 2 open circuited, the extra 12 mA of current drawn is often a worthwhile tradeoff for eliminating the need to set output voltage in test. Error Output 5 Error Vout 5.0 V ±1.0% 0 to 1.0 A 8 Vin Vout SNS LP2951CN Shutdown Input 3 SD VO T 1 2 6 220 mF GND FB 4 7 0.002 mF 1.0 M 2.0 k Output Noise In many applications it is desirable to reduce the noise present at the output. Reducing the regulator bandwidth by increasing the size of the output capacitor is the only method Figure 20. 1.0 A Regulator with 1.2 V Dropout www.onsemi.com 10 LP2950, LP2951, NCV2951 TYPICAL APPLICATIONS +V = 2.0 to 30 V IL IL = 1.23/R Load Unregulated Input 6.0 to 10 Vdc 8 Vin 8 NC 5 Error Vin Vout 1N4001 1 2 NC SNS 0.1 mF LP2951CN 3 6 NC SD VO T 330 pF GND FB 4 7 2.2 mF 4.2 V ±0.025 V Error Output 2.0 M 1.0% 806 k 1.0% Shutdown Input 5 0.1 mF Vout Error 1 2 SNS LP2951CN 3 6 SD VO T GND FB 4 7 Lithium Ion Rechargeable Cell 50 k 1.0 mF R GND Figure 21. Lithium Ion Battery Cell Charger Figure 22. Low Drift Current Sink +Vin +Vin 8 Vin 470 k 2N3906 5 470 k Reset Normally Closed Error Vout SNS LP2951CN 3 SD CMOS Gate *Sleep Input VO T 1 2 Vout NC 6 NC Error Output R1 GND FB 4 7 1.0 mF 5 470 k 8 Vin 47 k Error Vout SNS LP2951CN Shutdown Input 3 SD GND 4 R2 Error flag occurs when Vin is too low to maintain Vout, or if Vout is reduced by excessive load current. 2 Vout 2N3906 1 NC 200 k 3.3 mF 6 NC VO T 100 k 100 pF FB 7 100 k Figure 23. Latch Off When Error Flag Occurs Figure 24. 5.0 V Regulator with 2.5 V Sleep Function www.onsemi.com 11 LP2950, LP2951, NCV2951 +Vin 5 NC 8 Vin Vout Error D2 1 2 SNS LP2951CN #1 3 6 SD VO T D1 Memory V+ 1.0 mF 20 3.6 V NiCad GND FB 4 7 Early Warning 27 k All diodes are 1N4148. D3 Reset 2.7 M Q1 Early Warning flag on low input voltage. mP D4 Main output latches off at lower input voltages. VDD 2N3906 5 Battery backup on auxiliary output. 8 Vin 330 k Vout Error 1 2 SNS LP2951CN #2 3 6 SD VO T GND 4 Operation: Regulator #1’s Vout is programmed one diode drop above 5.0 V. Its error flag becomes active when Vin < 5.7 V. When Vin drops below 5.3 V, the error flag of regulator #2 becomes active and via Q1 latches the main output “off”. When Vin again exceeds 5.7 V, regulator #1 is back in regulation and the early warning signal rises, unlatching regulator #2 via D3. Main Output 1.0 mF FB 7 Figure 25. Regulator with Early Warning and Auxiliary Output +Vin Current Limit Section 0.05 470 680 2N3906 1000 mF 2N3906 MJE2955 .33 mF 10 k 4.7 M Error Flag 5 220 8 Vin Error Vout SNS LP2951CN 3 SD VO T GND FB 4 7 20 k 1 2 NC 6 NC .01 mF Vout @ 2.0 A 47 4.7 mF Tant 100 mF R1 R2 0.033 mF Vout = 1.25V (1.0 + R1/R2) For 5.0 V output, use internal resistors. Wire Pin 6 to 7, and wire Pin 2 to +Vout Bus. Figure 26. 2.0 A Low Dropout Regulator www.onsemi.com 12 LP2950, LP2951, NCV2951 + 5.0 V 4.7 k Output* 1 4 20 mA 5 NC 8 Vin Vout Error SNS LP2951CN 3 NC 1N4001 5 0.1 mF SD VO T Gnd 4 2 1 2 4 NC 6 * High for IL < 3.5 mA NC FB 7 1N457 360 1N457 1N457 Figure 27. Open Circuit Detector for 4.0 to 20 mA Current Loop 31.6 k 100 k 2 NC 1 5 8 Vin Error Vout SNS LP2951CN 3 3 SD VO T Gnd 4 1 Main V+ 2 Memory V+ 1.0 mF 6 20 NC NiCad Backup Battery FB 7 NC Figure 28. Low Battery Disconnect JUNCTION‐TO‐AIR (°C/W) R θ JA, THERMAL RESISTANCE 100 2.4 PD(max) for TA = 50°C Free Air Mounted Vertically 90 2.0 80 Minimum Size Pad 70 60 50 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 2.0 oz. Copper L 1.6 L 1.2 0.8 0.4 RqJA 40 0 0 5.0 10 15 20 25 30 L, LENGTH OF COPPER (mm) Figure 29. DPAK Thermal Resistance and Maximum Power Dissipation versus PCB Copper Length www.onsemi.com 13 PD, MAXIMUM POWER DISSIPATION (W) MC34164P−5 6.0 V Lead-Acid Battery 2N3906 LP2950, LP2951, NCV2951 ORDERING INFORMATION (LP2950) Output Voltage (Volts) Tolerance (%) Package Shipping† LP2950CZ−3.0G 3.0 1.0 TO−92 (Pb−Free) 2000 Units / Bag LP2950CZ−3.0RAG 3.0 1.0 TO−92 (Pb−Free) 2000 Units / Tape & Reel LP2950ACZ−3.0G 3.0 0.5 TO−92 (Pb−Free) 2000 Units / Bag LP2950ACZ−3.0RAG 3.0 0.5 TO−92 (Pb−Free) 2000 Units / Tape & Reel LP2950CZ−3.3G 3.3 1.0 TO−92 (Pb−Free) 2000 Units / Bag LP2950CZ−3.3RAG 3.3 1.0 TO−92 (Pb−Free) 2000 Units / Tape & Reel LP2950ACZ−3.3G 3.3 0.5 TO−92 (Pb−Free) 2000 Units / Bag LP2950ACZ−3.3RAG 3.3 0.5 TO−92 (Pb−Free) 2000 Units / Tape & Reel LP2950CZ−5.0G 5.0 1.0 TO−92 (Pb−Free) 2000 Units / Bag LP2950CZ−5.0RAG 5.0 1.0 TO−92 (Pb−Free) 2000 Units / Tape & Reel LP2950CZ−5.0RPG 5.0 1.0 TO−92 (Pb−Free) 2000 Units / Ammo Pack LP2950ACZ−5.0G 5.0 0.5 TO−92 (Pb−Free) 2000 Units / Bag LP2950ACZ−5.0RAG 5.0 0.5 TO−92 (Pb−Free) 2000 Units / Tape & Reel LP2950CDT−3.0RKG 3.0 1.0 DPAK (Pb−Free) 2500 Units / Tape & Reel LP2950CDT−3.3G 3.3 1.0 DPAK (Pb−Free) 75 Units / Rail LP2950CDT−3.3RKG 3.3 1.0 DPAK (Pb−Free) 2500 Units / Tape & Reel LP2950ACDT−3.3RG 3.3 0.5 DPAK (Pb−Free) 2500 Units / Tape & Reel LP2950CDT−5.0G 5.0 1.0 DPAK (Pb−Free) 75 Units / Rail LP2950CDT−5.0RKG 5.0 1.0 DPAK (Pb−Free) 2500 Units / Tape & Reel LP2950ACDT−5.0G 5.0 0.5 DPAK (Pb−Free) 75 Units / Rail LP2950ACDT−5RKG 5.0 0.5 DPAK (Pb−Free) 2500 Units / Tape & Reel Part Number †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 14 LP2950, LP2951, NCV2951 ORDERING INFORMATION (LP2951) Output Voltage (Volts) Tolerance (%) Package Shipping† LP2951CD−3.0R2G 3.0 1.0 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel LP2951ACD−3.0R2G 3.0 0.5 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel LP2951CD−3.3R2G 3.3 1.0 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel LP2951ACD−3.3G 3.3 0.5 SOIC−8 (Pb−Free) 98 Units / Rail LP2951ACD−3.3R2G 3.3 0.5 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel LP2951CDG 5.0 or Adj. 1.0 SOIC−8 (Pb−Free) 98 Units / Rail LP2951CDR2G 5.0 or Adj. 1.0 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel LP2951ACDG 5.0 or Adj. 0.5 SOIC−8 (Pb−Free) 98 Units / Rail LP2951ACDR2G 5.0 or Adj. 0.5 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel LP2951ACDM−3.0RG 3.0 0.5 Micro8 (Pb−Free) 4000 Units / Tape & Reel LP2951ACDM−3.3RG 3.3 0.5 Micro8 (Pb−Free) 4000 Units / Tape & Reel LP2951CDMR2G 5.0 or Adj. 1.0 Micro8 (Pb−Free) 4000 Units / Tape & Reel LP2951ACDMR2G 5.0 or Adj. 0.5 Micro8 (Pb−Free) 4000 Units / Tape & Reel Part Number †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. ORDERING INFORMATION (NCV2951) Output Voltage (Volts) Tolerance (%) Package Shipping† 3.3 0.5 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel NCV2951ACDR2G* 5.0 or Adj. 0.5 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel NCV2951CDR2G* 5.0 or Adj. 1.0 SOIC−8 (Pb−Free) 2500 Units / Tape & Reel NCV2951ACDMR2G* 5.0 or Adj. 0.5 Micro8 (Pb−Free) 4000 Units / Tape & Reel Part Number NCV2951ACD3.3R2G* †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. www.onsemi.com 15 LP2950, LP2951, NCV2951 MARKING DIAGRAMS DPAK CASE 369C TO−92 CASE 029 2950 CZ−xx ALYW 2950A CZ−xx ALYW 50−yG ALYWW 50−yyG ALYWW 50A−yG ALYWW 50AyyG ALYWW SOIC−8 CASE 751 8 1 8 51z ALYW G * 1 8 51z−33 ALYW G * 1 51z−3 ALYW G PDIP−8 CASE 626 8 8 51CN AWL YYWWG 1 8 51ACN AWL YYWWG 1 Micro8 CASE 846A 1 8 8 51CN−xx AWL YYWWG 51ACN−xx AWL YYWWG 1 xx = 3.0, 3.3, or 5.0 y = 3 or 5 yy = 30, 33, or 50 z = A or C A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week G = Pb−Free Package G = Pb−Free Package (Note: Microdot may be in either location) *This marking diagram also applies to NCV2951. www.onsemi.com 16 8 PAyy AYWG G 1 P−yy AYWG G 1 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−92 (TO−226) 1 WATT CASE 29−10 ISSUE D SCALE 1:1 12 3 STRAIGHT LEAD 1 DATE 05 MAR 2021 2 3 BENT LEAD STYLES AND MARKING ON PAGE 3 DOCUMENT NUMBER: DESCRIPTION: 98AON52857E TO−92 (TO−226) 1 WATT Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 3 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−92 (TO−226) 1 WATT CASE 29−10 ISSUE D DATE 05 MAR 2021 STYLES AND MARKING ON PAGE 3 DOCUMENT NUMBER: DESCRIPTION: 98AON52857E TO−92 (TO−226) 1 WATT Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 2 OF 3 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com TO−92 (TO−226) 1 WATT CASE 29−10 ISSUE D DATE 05 MAR 2021 STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR STYLE 2: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 3: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 5: PIN 1. DRAIN 2. SOURCE 3. GATE STYLE 6: PIN 1. GATE 2. SOURCE & SUBSTRATE 3. DRAIN STYLE 7: PIN 1. SOURCE 2. DRAIN 3. GATE STYLE 8: PIN 1. DRAIN 2. GATE 3. SOURCE & SUBSTRATE STYLE 9: PIN 1. BASE 1 2. EMITTER 3. BASE 2 STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE STYLE 11: PIN 1. ANODE 2. CATHODE & ANODE 3. CATHODE STYLE 12: PIN 1. MAIN TERMINAL 1 2. GATE 3. MAIN TERMINAL 2 STYLE 13: PIN 1. ANODE 1 2. GATE 3. CATHODE 2 STYLE 14: PIN 1. EMITTER 2. COLLECTOR 3. BASE STYLE 15: PIN 1. ANODE 1 2. CATHODE 3. ANODE 2 STYLE 16: PIN 1. ANODE 2. GATE 3. CATHODE STYLE 17: PIN 1. COLLECTOR 2. BASE 3. EMITTER STYLE 18: PIN 1. ANODE 2. CATHODE 3. NOT CONNECTED STYLE 19: PIN 1. GATE 2. ANODE 3. CATHODE STYLE 20: PIN 1. NOT CONNECTED 2. CATHODE 3. ANODE STYLE 21: PIN 1. COLLECTOR 2. EMITTER 3. BASE STYLE 22: PIN 1. SOURCE 2. GATE 3. DRAIN STYLE 23: PIN 1. GATE 2. SOURCE 3. DRAIN STYLE 24: PIN 1. EMITTER 2. COLLECTOR/ANODE 3. CATHODE STYLE 25: PIN 1. MT 1 2. GATE 3. MT 2 STYLE 26: PIN 1. 2. 3. STYLE 27: PIN 1. MT 2. SUBSTRATE 3. MT STYLE 28: PIN 1. CATHODE 2. ANODE 3. GATE STYLE 29: PIN 1. NOT CONNECTED 2. ANODE 3. CATHODE STYLE 30: PIN 1. DRAIN 2. GATE 3. SOURCE STYLE 32: PIN 1. BASE 2. COLLECTOR 3. EMITTER STYLE 33: PIN 1. RETURN 2. INPUT 3. OUTPUT STYLE 34: PIN 1. INPUT 2. GROUND 3. LOGIC STYLE 35: PIN 1. GATE 2. COLLECTOR 3. EMITTER VCC GROUND 2 OUTPUT STYLE 31: PIN 1. GATE 2. DRAIN 3. SOURCE GENERIC MARKING DIAGRAM* XXXXX XXXXX ALYWG G XXXX A L Y W G = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98AON52857E TO−92 (TO−226) 1 WATT Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 3 OF 3 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C ISSUE F 4 1 2 DATE 21 JUL 2015 3 SCALE 1:1 A E b3 C A B c2 4 L3 Z D 1 L4 2 3 NOTE 7 b2 e c SIDE VIEW b 0.005 (0.13) TOP VIEW H DETAIL A M BOTTOM VIEW C Z H L2 GAUGE PLANE C L L1 DETAIL A Z SEATING PLANE BOTTOM VIEW A1 ALTERNATE CONSTRUCTIONS ROTATED 905 CW STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 6: PIN 1. MT1 2. MT2 3. GATE 4. MT2 STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN STYLE 7: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE STYLE 8: PIN 1. N/C 2. CATHODE 3. ANODE 4. CATHODE STYLE 4: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE STYLE 9: STYLE 10: PIN 1. ANODE PIN 1. CATHODE 2. CATHODE 2. ANODE 3. RESISTOR ADJUST 3. CATHODE 4. CATHODE 4. ANODE SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.102 5.80 0.228 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.028 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.114 REF 0.020 BSC 0.035 0.050 −−− 0.040 0.155 −−− MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.72 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.90 REF 0.51 BSC 0.89 1.27 −−− 1.01 3.93 −−− GENERIC MARKING DIAGRAM* XXXXXXG ALYWW AYWW XXX XXXXXG IC Discrete = Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. 6.17 0.243 SCALE 3:1 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z XXXXXX A L Y WW G 3.00 0.118 1.60 0.063 STYLE 5: PIN 1. GATE 2. ANODE 3. CATHODE 4. ANODE NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. 7. OPTIONAL MOLD FEATURE. mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98AON10527D DPAK (SINGLE GAUGE) Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS PDIP−8 CASE 626−05 ISSUE P DATE 22 APR 2015 SCALE 1:1 D A E H 8 5 E1 1 4 NOTE 8 b2 c B END VIEW TOP VIEW WITH LEADS CONSTRAINED NOTE 5 A2 A e/2 NOTE 3 L SEATING PLANE A1 C D1 M e 8X SIDE VIEW b 0.010 eB END VIEW M C A M B M NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSIONS A, A1 AND L ARE MEASURED WITH THE PACKAGE SEATED IN JEDEC SEATING PLANE GAUGE GS−3. 4. DIMENSIONS D, D1 AND E1 DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS ARE NOT TO EXCEED 0.10 INCH. 5. DIMENSION E IS MEASURED AT A POINT 0.015 BELOW DATUM PLANE H WITH THE LEADS CONSTRAINED PERPENDICULAR TO DATUM C. 6. DIMENSION eB IS MEASURED AT THE LEAD TIPS WITH THE LEADS UNCONSTRAINED. 7. DATUM PLANE H IS COINCIDENT WITH THE BOTTOM OF THE LEADS, WHERE THE LEADS EXIT THE BODY. 8. PACKAGE CONTOUR IS OPTIONAL (ROUNDED OR SQUARE CORNERS). DIM A A1 A2 b b2 C D D1 E E1 e eB L M INCHES MIN MAX −−−− 0.210 0.015 −−−− 0.115 0.195 0.014 0.022 0.060 TYP 0.008 0.014 0.355 0.400 0.005 −−−− 0.300 0.325 0.240 0.280 0.100 BSC −−−− 0.430 0.115 0.150 −−−− 10 ° MILLIMETERS MIN MAX −−− 5.33 0.38 −−− 2.92 4.95 0.35 0.56 1.52 TYP 0.20 0.36 9.02 10.16 0.13 −−− 7.62 8.26 6.10 7.11 2.54 BSC −−− 10.92 2.92 3.81 −−− 10 ° NOTE 6 GENERIC MARKING DIAGRAM* STYLE 1: PIN 1. AC IN 2. DC + IN 3. DC − IN 4. AC IN 5. GROUND 6. OUTPUT 7. AUXILIARY 8. VCC XXXXXXXXX AWL YYWWG XXXX A WL YY WW G = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. DOCUMENT NUMBER: DESCRIPTION: 98ASB42420B PDIP−8 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOIC−8 NB CASE 751−07 ISSUE AK 8 1 SCALE 1:1 −X− DATE 16 FEB 2011 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751−01 THRU 751−06 ARE OBSOLETE. NEW STANDARD IS 751−07. A 8 5 S B 0.25 (0.010) M Y M 1 4 −Y− K G C N X 45 _ SEATING PLANE −Z− 0.10 (0.004) H M D 0.25 (0.010) M Z Y S X J S 8 8 1 1 IC 4.0 0.155 XXXXX A L Y W G IC (Pb−Free) = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package XXXXXX AYWW 1 1 Discrete XXXXXX AYWW G Discrete (Pb−Free) XXXXXX = Specific Device Code A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. 1.270 0.050 SCALE 6:1 INCHES MIN MAX 0.189 0.197 0.150 0.157 0.053 0.069 0.013 0.020 0.050 BSC 0.004 0.010 0.007 0.010 0.016 0.050 0 _ 8 _ 0.010 0.020 0.228 0.244 8 8 XXXXX ALYWX G XXXXX ALYWX 1.52 0.060 0.6 0.024 MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.33 0.51 1.27 BSC 0.10 0.25 0.19 0.25 0.40 1.27 0_ 8_ 0.25 0.50 5.80 6.20 GENERIC MARKING DIAGRAM* SOLDERING FOOTPRINT* 7.0 0.275 DIM A B C D G H J K M N S mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. STYLES ON PAGE 2 DOCUMENT NUMBER: DESCRIPTION: 98ASB42564B SOIC−8 NB Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 2 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com SOIC−8 NB CASE 751−07 ISSUE AK DATE 16 FEB 2011 STYLE 1: PIN 1. EMITTER 2. COLLECTOR 3. COLLECTOR 4. EMITTER 5. EMITTER 6. BASE 7. BASE 8. EMITTER STYLE 2: PIN 1. COLLECTOR, DIE, #1 2. COLLECTOR, #1 3. COLLECTOR, #2 4. COLLECTOR, #2 5. BASE, #2 6. EMITTER, #2 7. BASE, #1 8. EMITTER, #1 STYLE 3: PIN 1. DRAIN, DIE #1 2. DRAIN, #1 3. DRAIN, #2 4. DRAIN, #2 5. GATE, #2 6. SOURCE, #2 7. GATE, #1 8. SOURCE, #1 STYLE 4: PIN 1. ANODE 2. ANODE 3. ANODE 4. ANODE 5. ANODE 6. ANODE 7. ANODE 8. COMMON CATHODE STYLE 5: PIN 1. DRAIN 2. DRAIN 3. DRAIN 4. DRAIN 5. GATE 6. GATE 7. SOURCE 8. SOURCE STYLE 6: PIN 1. SOURCE 2. DRAIN 3. DRAIN 4. SOURCE 5. SOURCE 6. GATE 7. GATE 8. SOURCE STYLE 7: PIN 1. INPUT 2. EXTERNAL BYPASS 3. THIRD STAGE SOURCE 4. GROUND 5. DRAIN 6. GATE 3 7. SECOND STAGE Vd 8. FIRST STAGE Vd STYLE 8: PIN 1. COLLECTOR, DIE #1 2. BASE, #1 3. BASE, #2 4. COLLECTOR, #2 5. COLLECTOR, #2 6. EMITTER, #2 7. EMITTER, #1 8. COLLECTOR, #1 STYLE 9: PIN 1. EMITTER, COMMON 2. COLLECTOR, DIE #1 3. COLLECTOR, DIE #2 4. EMITTER, COMMON 5. EMITTER, COMMON 6. BASE, DIE #2 7. BASE, DIE #1 8. EMITTER, COMMON STYLE 10: PIN 1. GROUND 2. BIAS 1 3. OUTPUT 4. GROUND 5. GROUND 6. BIAS 2 7. INPUT 8. GROUND STYLE 11: PIN 1. SOURCE 1 2. GATE 1 3. SOURCE 2 4. GATE 2 5. DRAIN 2 6. DRAIN 2 7. DRAIN 1 8. DRAIN 1 STYLE 12: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 6. DRAIN 7. DRAIN 8. DRAIN STYLE 13: PIN 1. N.C. 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 6. DRAIN 7. DRAIN 8. DRAIN STYLE 14: PIN 1. N−SOURCE 2. N−GATE 3. P−SOURCE 4. P−GATE 5. P−DRAIN 6. P−DRAIN 7. N−DRAIN 8. N−DRAIN STYLE 15: PIN 1. ANODE 1 2. ANODE 1 3. ANODE 1 4. ANODE 1 5. CATHODE, COMMON 6. CATHODE, COMMON 7. CATHODE, COMMON 8. CATHODE, COMMON STYLE 16: PIN 1. EMITTER, DIE #1 2. BASE, DIE #1 3. EMITTER, DIE #2 4. BASE, DIE #2 5. COLLECTOR, DIE #2 6. COLLECTOR, DIE #2 7. COLLECTOR, DIE #1 8. COLLECTOR, DIE #1 STYLE 17: PIN 1. VCC 2. V2OUT 3. V1OUT 4. TXE 5. RXE 6. VEE 7. GND 8. ACC STYLE 18: PIN 1. ANODE 2. ANODE 3. SOURCE 4. GATE 5. DRAIN 6. DRAIN 7. CATHODE 8. CATHODE STYLE 19: PIN 1. SOURCE 1 2. GATE 1 3. SOURCE 2 4. GATE 2 5. DRAIN 2 6. MIRROR 2 7. DRAIN 1 8. MIRROR 1 STYLE 20: PIN 1. SOURCE (N) 2. GATE (N) 3. SOURCE (P) 4. GATE (P) 5. DRAIN 6. DRAIN 7. DRAIN 8. DRAIN STYLE 21: PIN 1. CATHODE 1 2. CATHODE 2 3. CATHODE 3 4. CATHODE 4 5. CATHODE 5 6. COMMON ANODE 7. COMMON ANODE 8. CATHODE 6 STYLE 22: PIN 1. I/O LINE 1 2. COMMON CATHODE/VCC 3. COMMON CATHODE/VCC 4. I/O LINE 3 5. COMMON ANODE/GND 6. I/O LINE 4 7. I/O LINE 5 8. COMMON ANODE/GND STYLE 23: PIN 1. LINE 1 IN 2. COMMON ANODE/GND 3. COMMON ANODE/GND 4. LINE 2 IN 5. LINE 2 OUT 6. COMMON ANODE/GND 7. COMMON ANODE/GND 8. LINE 1 OUT STYLE 24: PIN 1. BASE 2. EMITTER 3. COLLECTOR/ANODE 4. COLLECTOR/ANODE 5. CATHODE 6. CATHODE 7. COLLECTOR/ANODE 8. COLLECTOR/ANODE STYLE 25: PIN 1. VIN 2. N/C 3. REXT 4. GND 5. IOUT 6. IOUT 7. IOUT 8. IOUT STYLE 26: PIN 1. GND 2. dv/dt 3. ENABLE 4. ILIMIT 5. SOURCE 6. SOURCE 7. SOURCE 8. VCC STYLE 29: PIN 1. BASE, DIE #1 2. EMITTER, #1 3. BASE, #2 4. EMITTER, #2 5. COLLECTOR, #2 6. COLLECTOR, #2 7. COLLECTOR, #1 8. COLLECTOR, #1 STYLE 30: PIN 1. DRAIN 1 2. DRAIN 1 3. GATE 2 4. SOURCE 2 5. SOURCE 1/DRAIN 2 6. SOURCE 1/DRAIN 2 7. SOURCE 1/DRAIN 2 8. GATE 1 DOCUMENT NUMBER: DESCRIPTION: 98ASB42564B SOIC−8 NB STYLE 27: PIN 1. ILIMIT 2. OVLO 3. UVLO 4. INPUT+ 5. SOURCE 6. SOURCE 7. SOURCE 8. DRAIN STYLE 28: PIN 1. SW_TO_GND 2. DASIC_OFF 3. DASIC_SW_DET 4. GND 5. V_MON 6. VBULK 7. VBULK 8. VIN Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 2 OF 2 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS Micro8 CASE 846A−02 ISSUE K DATE 16 JUL 2020 SCALE 2:1 GENERIC MARKING DIAGRAM* 8 XXXX AYWG G 1 XXXX A Y W G = Specific Device Code = Assembly Location = Year = Work Week = Pb−Free Package (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98ASB14087C MICRO8 STYLE 1: PIN 1. 2. 3. 4. 5. 6. 7. 8. SOURCE SOURCE SOURCE GATE DRAIN DRAIN DRAIN DRAIN STYLE 2: PIN 1. 2. 3. 4. 5. 6. 7. 8. SOURCE 1 GATE 1 SOURCE 2 GATE 2 DRAIN 2 DRAIN 2 DRAIN 1 DRAIN 1 STYLE 3: PIN 1. 2. 3. 4. 5. 6. 7. 8. N-SOURCE N-GATE P-SOURCE P-GATE P-DRAIN P-DRAIN N-DRAIN N-DRAIN Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative
LP2950ACDT-3RKG 价格&库存

很抱歉,暂时无法提供与“LP2950ACDT-3RKG”相匹配的价格&库存,您可以联系我们找货

免费人工找货