Ordering number : ENA1950
Bi-CMOS IC
LV5026M
LED Driver IC
Overview
LV5026M is a High Voltage LED drive controller which drives LED current up to 3A with external MOSFET.
LV5026M is realized very simple LED circuits with a few external parts. It corresponds to various wide dimming
controls including the TRIAC dimming control.
Functions
• High Voltage LED Controller
• Short Protection Circuit
• Various Dimming Control
• Selectable reference Voltage
-TRIAC & Analog Input & PWM Input
-Internal 0.605V & External Input Voltage
• Soft Start function
• Low noise switching system
• Built-in TRIAC stabilized function
- 5 stages skip mode Frequency
• Built-in circuit of detection of overvoltage of CS pin.
- Soft driving
• Selectable Switching frequency [50 kHz or 70 kHz, open: 50 kHz]
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum Input voltage
Symbol
Conditions
VIN max
REF_OUT, REF_IN, RT, CS,
Ratings
Unit
-0.3 to 42
V
-0.3 to 7
V
PWM_D, ACS
OUT1 pin
VOUT_abs
-0.3 to 42
V
OUT2 pin
VOUT2_abs
-0.3 to 42
V
Allowable power dissipation
Pd max
Junction temperature
Tj
Operating temperature
Storage temperature
With specified board*
1.0
W
150
°C
Topr
-30 to +125
°C
Tstg
-40 to +150
°C
*Specified board: 58.0×54.0×1.6mm (glass epoxy board)
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer' s products or
equipment.
41311 SY 20110330-S00004 No.A1950-1/5
LV5026M
Recommended Operating Conditions at Ta = 25°C
Parameter
Input voltage
Symbol
Conditions
Ratings
Unit
VIN
8.5 to 42
V
Electrical Characteristics at Ta = 25°C, VIN = 12V, unless otherwise specified.
Parameter
Symbol
Conditions
Ratings
min
typ
Unit
max
Reference Voltage block
Built-in Reference Voltage
VREF
VREF VIN regulation
VREF_LN
VIN = 8.5 to 24V
0.585
Reference Output Voltage
REFOUT
IREFOUT = 0.5mA
- Maximum load
REFOUT_MAX
- equivalent output impedance
REFOUT_RO
0.605
0.625
V
±0.5
%
3.0
V
0.5
mA
10
Ω
Under Voltage Lockout
Operation Start Input Voltage
UVLOON
Operation Stop Input Voltage
UVLOOFF
Hysterisys Voltage
UVLOH
8
6.3
9
10
V
7.3
8.3
V
1.7
V
Oscillation
Frequency
FOSC1 Switch voltage
FOSC1
RT = OPEN
40
50
60
kHz
FOSC2
RT=REF_OUT
55
70
85
kHz
5
V
VOSC1
2
FOSC2 Switch voltage
VOSC2
Maximum Duty
MAXDuty
93
0.5
V
VIO_VR
1
10
mV
VIO_RI
1
10
mV
%
Comparator
Input offset Voltage
(Between CS and VREF)
Input offset Voltage
(Between CS and REFOUT)
Input current
IIOCS
IIOREF
CS pin max voltage
VOM
malfunction prevention mask
TMSK
160
nA
80
nA
1
150
V
ns
time
PWM_D Circuit
OFF voltage
VOFF
2
5
V
ON voltage
VON
0
0.6
V
Thermal protection Circuit
Thermal shutdown temperature
TSD
*Design guarantee
165
°C
Thermal shutdown hysterisys
ΔTSD
*Design guarantee
30
°C
1000
mA
Drive Circuit
OUT sink current
IOI
OUT source current
IOO
500
120
Minimum On time
TMIN
200
300
3.0
3.2
mA
ns
TRIAC Stabilization Circuit
Threshold of OUT2
VACS
OUT2=High [ less than right record ]
OUT2 sink current
IO2I
VIN=12V, OUT2=6V
2.8
0.6
mA
V
OUT2 source current
IO2O
VIN=12V, OUT2=6V
0.6
mA
UVLO mode VIN current
ICCOFF
VINUVLOON, OUT = OPEN
0.6
VCC current
120
μA
mA
VIN Over Voltage Protection Circuit
VIN over voltage protection
voltage
VINOVP
VIN Current at OVP
IINOVP
VIN=30V
24
27
30
V
0.7
1.0
1.5
mA
CS terminal abnormal sensing circuit
Abnormal sensing voltage
CSOCP
1.9
V
*: Design guarantee (value guaranteed by design and not tested before shipment)
No.A1950-2/5
LV5026M
Block Diagram
VIN
Built-in
REGULATOR
REF_OUT
TSD
3.0V
UVLO
OVP
REFERENCE
VOLTAGE
0.61V
OSCILATOR
CS
REF_IN
S
+
-
Q
CONTROL
LOGIC
R
OUT
Current Limit
Comparater
Short
Protection
Circuit
ACS
+
OUT2
AC_Voltage sense
Comparater
GND
PWM_D
RT
Sample Application Circuit
AC+
AC+
LED+
LED+
AC-
AC-
V CC
ACS
LED-
LEDV CC
ACS
OUT2
REF_OUT
OUT2
REF_OUT
REF_IN
RT
PWM_D
REF_IN
RT
PWM_D
OUT
GND
CS
OUT
GND
CS
No.A1950-3/5
LV5026M
Package Dimensions
unit : mm (typ)
3086B
5
6.4
1
0.15
0.1 (1.5)
1.7max
4.4
6
0.63
5.0
10
0.35
1.0
(0.5)
SANYO : MFP10S(225mil)
Pin Assignment
RT
ACS
OUT2
REF_OUT
REF_IN
LV5026M
VIN
CS
OUT
PWM_D
GND
(TOP VIEW)
Pin Function
Pin No.
Pin name
1
RT
2
REF_OUT
Function
Switching Frequency selection Pin.
[ L or Open : 50kHz Switching / H(2V – 5V) : 70 kHz Switching ]
Built-in 3V Regulate out Pin.
[If this function isn’t used, please connect GND or no connection.]
3
REF_IN
External LED current Limit Setting Pin.
If less than VREF (0.605V) voltage is input, Peak current value is used at the input voltage. If more than Vref voltage is
input, it is done at VREF voltage.
[If this function isn’t used, please connect nothing.]
4
CS
LED current sensing pin.
When this pin voltage exceeds VREF (or REF_IN), external FET is OFF. And if the voltage of the pin exceeds 1.9V,
LV5026M turns to latch-off mode.
5
PWM_D
PWM DIMMING pin.
6
GND
7
OUT
Driving the external FET Gate pin.
8
VIN
Power supply pin.
[L or open :normal operation, H: Stop operation ]
GND pin
Operation: VIN > UVLOON
Stop: VIN < UVLOOFF
Switching Stop: VIN > VINOVP
9
OUT2
This terminal is driving the FET which is stabilized the TRIAC application. If ACS is less than 3V, OUT2 outputs VIN.
[If this function isn’t used, please connect nothing.]
10
ACS
This terminal is sensing the AC Voltage.
[If this function isn’t used, please connect GND.]
No.A1950-4/5
LV5026M
Skip frequency function
LV5026M contains the skip frequency function for reduction of the peak value of conduction noise. This function
changes the frequency as follows.
Skip Frequency Function
VIN
UVLO unlocked
OUT
45k
55k
52.5k
50k
47.5k
45k
Switching frequency is changed as follows.
… ×0.9 → ×1.1 → ×1.05 → ×1 → ×0.95 → ×0.9 → ×1.1 …
It’s repeated by this loop.
CS pin abnormal stop function
If the voltage of the pin exceeds 1.9V, LV5026M turns to latch-off mode and switching is stopping.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides
provides information
information as
as of
of March,
April, 2011.
2011. Specifications
Specifications and
and information
information herein
herein are subject
to change without notice.
PS No.A1950-5/5