MBR2515L
Switch-mode
Power Rectifier
Features and Benefits
•
•
•
•
•
•
Low Forward Voltage
Low Power Loss/High Efficiency
High Surge Capacity
100°C Operating Junction Temperature
25 A Total
Pb−Free Packages are Available*
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
25 AMPERES, 15 VOLTS
Applications
• Power Supply – Output Rectification
• Power Management
• Instrumentation
1
3
4
Mechanical Characteristics
•
•
•
•
•
•
MARKING
DIAGRAM
Case: Epoxy, Molded
Epoxy Meets UL 94, V−0 @ 0.125 in
Weight: 1.9 Grams (Approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperatures for Soldering Purposes: 260°C Max. for 10 Seconds
ESD Rating:
Human Body Model 3B
Machine Model C
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
4
TO−220AC
CASE 221B
STYLE 1
AY WWG
B2515L
KA
1
3
A
Y
WW
G
B2515L
KA
= Assembly Location
= Year
= Work Week
= Pb−Free Package
= Device Code
= Diode Polarity
ORDERING INFORMATION
Device
Package
Shipping
MBR2515L
TO−220
50 Units/Rail
TO−220
(Pb−Free)
50 Units/Rail
MBR2515LG
© Semiconductor Components Industries, LLC, 2008
June, 2008 − Rev. 7
1
Publication Order Number:
MBR2515L/D
MBR2515L
MAXIMUM RATINGS
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Rating
VRRM
VRWM
VR
15
V
Average Rectified Forward Current
(TC = 91°C per Device)
IF(AV)
Peak Repetitive Forward Current, per Leg (Square Wave, 20 kHz, TC = 95°C)
IFRM
25
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz)
IFSM
150
A
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz)
IRRM
1.0
A
Storage Temperature Range
Tstg
−65 to +125
°C
Operating Junction Temperature
TJ
−65 to +100
°C
A
25
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
THERMAL CHARACTERISTICS
Characteristic
Conditions
Symbol
Max
Unit
°C/W
Maximum Thermal Resistance, Junction−to−Case
Min. Pad
RqJC
1.0
Maximum Thermal Resistance, Junction−to−Ambient
Min. Pad
RqJA
70
Min
Typical
Max
−
−
−
0.41
0.37
0.34
0.45
0.42
0.38
−
−
1.0
24
15
200
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Instantaneous Forward Voltage (Note 1)
(iF = 25 Amps, Tj = 25°C)
(iF = 25 Amps, Tj = 70°C)
(iF = 19 Amps, Tj = 70°C)
vF
Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, Tj = 25°C)
(Rated dc Voltage, Tj = 70°C)
iR
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
Unit
V
mA
100
25°C
100°C
10
IF, INSTANTANEOUS FORWARD CURRENT (A)
IF, INSTANTANEOUS FORWARD CURRENT (A)
MBR2515L
70°C
1.0
0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
100
70°C
1.0
0.1
0
0.1
0.5
0.6
dc
36
IF(AV), AVERAGE FORWARD
CURRENT (A)
IR, REVERSE CURRENT (mA)
0.4
40
100°C
100
70°C
10
25°C
1.0
5.0
10
32
28
SQUARE
24
20
16
12
8
4
0
75
15
VR, REVERSE VOLTAGE (V)
PF(AV), AVERAGE POWER DISSIPATION (W)
RqJA = 16°C/W
RqJA = 70°C/W
(No Heat Sink)
dc
18
16
14
12
10
Square Wave
8.0
dc
6.0
4.0
2.0
0
25
50
85
90
95
100
105
Figure 4. Current Derating, Case, Per Leg
22
20
80
TC, CASE TEMPERATURE (°C)
Figure 3. Typical Reverse Current
IF(AV), AVERAGE FORWARD CURRENT (A)
0.3
Figure 2. Maximum Forward Voltage
1000
0
0.2
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Figure 1. Typical Forward Voltage
0.1
25°C
100°C
10
75
100
14
TJ = 100°C
12
10
8.0
Square Wave
6.0
dc
4.0
2.0
0
0 2.0 4.0 6.0 8.0 10 12 14 16 18 20 22 24 26
TA, AMBIENT TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD CURRENT (A)
Figure 5. Current Derating, Ambient, Per Leg
Figure 6. Forward Power Dissipation
http://onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−220, 2−LEAD
CASE 221B−04
ISSUE F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
B
Q
SCALE 1:1
F
S
T
DIM
A
B
C
D
F
G
H
J
K
L
Q
R
S
T
U
4
A
1
U
3
H
K
L
R
D
J
G
STYLE 1:
PIN 1.
2.
3.
4.
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42149B
TO−220, 2−LEAD
CATHODE
N/A
ANODE
CATHODE
DATE 12 APR 2013
STYLE 2:
PIN 1.
2.
3.
4.
INCHES
MIN
MAX
0.595
0.620
0.380
0.405
0.160
0.190
0.025
0.039
0.142
0.161
0.190
0.210
0.110
0.130
0.014
0.025
0.500
0.562
0.045
0.060
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
MILLIMETERS
MIN
MAX
15.11
15.75
9.65
10.29
4.06
4.82
0.64
1.00
3.61
4.09
4.83
5.33
2.79
3.30
0.36
0.64
12.70
14.27
1.14
1.52
2.54
3.04
2.04
2.79
1.14
1.39
5.97
6.48
0.000
1.27
ANODE
N/A
CATHODE
ANODE
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
