MC100E150FNG

MC10E150, MC100E150 5VECL 6-Bit D Latch Description The MC10E/100E150 contains six D-type latches with differential outputs. When both Latch Enables (LEN1, LEN2) are LOW, the latch is transparent and input data transitions propagate through to the output. A logic HIGH on either LEN1 or LEN2 (or both) latches the data. The Master Reset (MR) overrides all other controls to set the Q outputs low. The 100 Series contains temperature compensation. http://onsemi.com Features • 800 ps Max. Propagation Delay • PECL Mode Operating Range: VCC = 4.2 V to 5.7 V • • • • • • • • with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = −4.2 V to −5.7 V Internal Input 50 kW Pulldown Resistors ESD Protection: Human Body Model; > 2 kV, Machine Model; > 200 V Charged Device Model; > 2 kV Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test Moisture Sensitivity Level: Pb = 1 Pb−Free = 3 For Additional Information, see Application Note AND8003/D Flammability Rating: UL 94 V−0 @ 0.125 in, Oxygen Index: 28 to 34 Transistor Count = 173 devices Pb−Free Packages are Available* PLCC−28 FN SUFFIX CASE 776 MARKING DIAGRAM* 1 MCxxxE150FNG AWLYYWW xxx A WL YY WW G = 10 or 100 = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package *For additional marking information, refer to Application Note AND8002/D. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 December, 2006 − Rev. 10 1 Publication Order Number: MC10E150/D MC10E150, MC100E150 MR LEN2 LEN1 NC VCCO Q5 Q5 25 20 19 24 23 22 21 D0 R D5 26 18 Q4 D4 27 17 Q4 28 16 VCC 15 Q3 D3 VEE Q0 D D1 Q1 D R Pinout: 28-Lead PLCC (Top View) 1 D2 2 14 Q3 D1 3 13 Q2 D0 4 12 Q2 5 6 D2 8 9 10 11 Q0 Q0 Q1 Q1 VCCO D5 * All VCC and VCCO pins are tied together on the die. D LEN1 LEN2 Figure 1. 28−Lead Pinout MR Figure 2. Logic Diagram Table 1. PIN DESCRIPTION PIN D0 − D5 LEN1, LEN2 MR Q0 − Q5, Q0 − Q5 VCC, VCCO VEE NC FUNCTION ECL Data Inputs ECL Latch Enables ECL Master Reset ECL Differential Outputs Positive Supply Negative Supply No Connect http://onsemi.com 2 Q4 Q5 R Warning: All VCC, VCCO, and VEE pins must be externally connected to Power Supply to guarantee proper operation. Q3 Q4 D R NC VCCO Q2 Q3 D R D4 7 Q1 Q2 D R D3 Q0 Q5 MC10E150, MC100E150 Table 2. MAXIMUM RATINGS Symbol Rating Unit VCC PECL Mode Power Supply Parameter VEE = 0 V Condition 1 Condition 2 8 V VEE NECL Mode Power Supply VCC = 0 V −8 V VI PECL Mode Input Voltage NECL Mode Input Voltage VEE = 0 V VCC = 0 V 6 −6 V V Iout Output Current Continuous Surge 50 100 mA mA TA Operating Temperature Range 0 to +85 °C Tstg Storage Temperature Range −65 to +150 °C qJA Thermal Resistance (Junction−to−Ambient) 0 lfpm 500 lfpm PLCC−28 PLCC−28 63.5 43.5 °C/W °C/W qJC Thermal Resistance (Junction−to−Case) Standard Board PLCC−28 22 to 26 °C/W VEE PECL Operating Range NECL Operating Range 4.2 to 5.7 −5.7 to −4.2 V V Tsol Wave Solder 265 265 °C VI v VCC VI w VEE Pb Pb−Free Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Table 3. 10E SERIES PECL DC CHARACTERISTICS VCC = 5.0 V, VEE = 0.0 V (Note 1) 0°C Symbol Typ Max 52 62 3980 4070 4160 3050 3210 3370 Input HIGH Voltage 3830 3995 Input LOW Voltage 3050 3285 Characteristic IEE Power Supply Current VOH Output HIGH Voltage (Note 2) VOL Output LOW Voltage (Note 2) VIH VIL IIH Input HIGH Current IIL Input LOW Current Min 25°C D LEN, MR Min Typ Max 52 62 4020 4105 4190 3050 3210 3370 4160 3870 4030 4190 3520 3050 3285 3520 200 150 0.5 85°C 0.3 Min Typ Max Unit 52 62 mA 4090 4185 4280 mV 3050 3227 3405 mV 3940 4110 4280 mV 3050 3302 3555 mV 200 150 mA mA 200 150 0.5 0.25 0.3 0.2 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.06 V. 2. Outputs are terminated through a 50 W resistor to VCC − 2.0 V. http://onsemi.com 3 MC10E150, MC100E150 Table 4. 10E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = −5.0 V (Note 3) 0°C Symbol Characteristic Min 25°C Typ Max 52 62 Min 85°C Typ Max 52 62 Min Typ Max Unit 52 62 mA IEE Power Supply Current VOH Output HIGH Voltage (Note 4) −1020 −930 −840 −980 −895 −810 −910 −815 −720 mV VOL Output LOW Voltage (Note 4) −1950 −1790 −1630 −1950 −1790 −1630 −1950 −1773 −1595 mV VIH Input HIGH Voltage −1170 −1005 −840 −1130 −970 −810 −1060 −890 −720 mV VIL Input LOW Voltage −1950 −1715 −1480 −1950 −1715 −1480 −1950 −1698 −1445 mV IIH Input HIGH Current 200 150 mA mA IIL Input LOW Current 200 150 D LEN, MR 0.5 0.3 200 150 0.5 0.065 0.3 mA 0.2 NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 3. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.06 V. 4. Outputs are terminated through a 50 W resistor to VCC − 2.0 V. Table 5. 100E SERIES PECL DC CHARACTERISTICS VCC = 5.0 V, VEE = 0.0 V (Note 5) 0°C Symbol Characteristic Typ Max 52 62 3975 4050 4120 Output LOW Voltage (Note 6) 3190 3295 Input HIGH Voltage 3835 3975 VIL Input LOW Voltage 3190 3355 IIH Input HIGH Current IEE Power Supply Current VOH Output HIGH Voltage (Note 6) VOL VIH IIL Input LOW Current Min 25°C D LEN, MR Min Typ Max 52 62 3975 4050 4120 3380 3190 3255 4120 3835 3975 3525 3190 3355 200 150 0.5 85°C 0.3 Min Typ Max Unit 60 72 mA 3975 4050 4120 mV 3380 3190 3260 3380 mV 4120 3835 3975 4120 mV 3525 3190 3355 3525 mV 200 150 mA mA 200 150 0.5 0.25 0.5 0.2 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 5. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.8 V. 6. Outputs are terminated through a 50 W resistor to VCC − 2.0 V. http://onsemi.com 4 MC10E150, MC100E150 Table 6. 100E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = −5.0 V (Note 7) 0°C Symbol Characteristic Min 25°C Typ Max 52 62 Min 85°C Typ Max 52 62 Min Typ Max Unit 60 72 mA IEE Power Supply Current VOH Output HIGH Voltage (Note 8) −1025 −950 −880 −1025 −950 −880 −1025 −950 −880 mV VOL Output LOW Voltage (Note 8) −1810 −1705 −1620 −1810 −1745 −1620 −1810 −1740 −1620 mV VIH Input HIGH Voltage −1165 −1025 −880 −1165 −1025 −880 −1165 −1025 −880 mV VIL Input LOW Voltage −1810 −1645 −1475 −1810 −1645 −1475 −1810 −1645 −1475 mV IIH Input HIGH Current 200 150 mA mA IIL Input LOW Current 200 150 D LEN, MR 0.5 0.3 200 150 0.5 0.25 0.5 mA 0.2 NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 7. Input and output parameters vary 1:1 with VCC. VEE can vary −0.46 V / +0.8 V. 8. Outputs are terminated through a 50 W resistor to VCC − 2.0 V. Table 7. AC CHARACTERISTICS VCCx= 5.0 V; VEE = 0.0 V or VCCx = 0.0 V; VEE = −5.0 V (Note 9) 0°C 25°C Characteristic Min Typ Min Typ fMAX Maximum Toggle Frequency 900 1100 tPLH tPHL Propagation Delay to Output D LEN MR 900 1100 250 375 450 375 500 625 250 375 450 375 500 625 ts Setup Time D 200 50 200 th Hold Time D 200 −50 tRR tPW Reset Recovery Time 750 650 Minimum Pulse Width MR 400 tSKEW Within-Device Skew (Note 10) 50 50 50 ps tJITTER Random Clock Jitter (RMS)