MC100EL05DT

5V ECL 2‐Input Differential AND/NAND MC10EL05, MC100EL05 Description The MC10EL/100EL05 is a 2-input differential AND/NAND gate. The device is functionally equivalent to the E404 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E404, the EL05 is ideally suited for those applications which require the ultimate in AC performance. Because a negative 2-input NAND is equivalent to a 2-input OR function, the differential inputs and outputs of the device allows the EL05 to also be used as a 2-input differential OR/NOR gate. The differential inputs employ clamp circuitry so that under open input conditions (pulled down to VEE) the input to the AND gate will be HIGH. In this way, if one set of inputs is open, the gate will remain active to the other input. The 100 Series contains temperature compensation. www.onsemi.com 8 1 SOIC−8 D SUFFIX CASE 751−07 MARKING DIAGRAM* Features • 275 ps Propagation Delay • ESD Protection: > 1 kV Human Body Model, ♦ > 100 V Machine Model PECL Mode Operating Range: ♦ VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mode Operating Range: ♦ VCC = 0 V with VEE = −4.2 V to −5.7 V Internal Input Pulldown Resistors Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Moisture Sensitivity ♦ For Additional Information, see Application Note AND8003/D Flammability Rating: ♦ UL 94 V−0 @ 0.125 in, Oxygen Index: 28 to 34 Transistor Count = 44 devices These Devices are Pb-Free, Halogen Free and are RoHS Compliant • • • • • • • KEL05 ALYW G HEL05 ALYW G ♦ • 8 8 1 1 H K A L Y W G = MC10 = MC100 = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package (Note: Microdot may be in either location) *For additional marking information, refer to Application Note AND8002/D. ORDERING INFORMATION Package Shipping† MC10EL05DR2G SOIC−8 (Pb-Free) 2500 / Tape & Reel MC100EL05DG SOIC−8 (Pb-Free) 98 Units / Tube Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2016 April, 2021 − Rev. 8 1 Publication Order Number: MC10EL05/D MC10EL05, MC100EL05 Table 1. TRUTH TABLE D0 D1 D0 D1 Q Q L L H H L H L H H L L H H L L H L H H H L L H L Table 2. PIN DESCRIPTION PIN D0 1 8 VCC D0 2 7 Q D1 3 6 Q D1 4 5 VEE Function D0, D0; D1, D1 ECL Data Inputs Q, Q ECL Data Outputs VCC Positive Supply VEE Negative Supply Figure 1. Logic Diagram and Pinout Assignment Table 3. MAXIMUM RATINGS Symbol Parameter Condition 1 Condition 2 Rating Unit VCC PECL Mode Power Supply VEE = 0 V 8 V VEE NECL Mode Power Supply VCC = 0 V −8 V VI PECL Mode Input Voltage NECL Mode Input Voltage VEE = 0 V VCC = 0 V 6 −6 V Iout Output Current Continuous Surge 50 100 mA TA Operating Temperature Range −40 to +85 °C Tstg Storage Temperature Range −65 to +150 °C qJA Thermal Resistance (Junction-to-Ambient) 0 lfpm 500 lfpm SOIC−8 190 130 °C/W qJC Thermal Resistance (Junction-to-Case) Standard Board SOIC−8 41 to 44 °C/W Tsol Wave Solder (Pb-Free)