MC100EL57DR2

MC10EL57, MC100EL57 5VECL 4:1 Differential Multiplexer Description The MC10/100EL57 is a fully differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can also be used as a differential 2:1 multiplexer with SEL0 input selecting between D0 and D1. The SEL1 is the most significant select line. The binary number applied to the select inputs will select the same numbered data input (i.e., 00 selects D0). Multiple VBB outputs are provided for single-ended or AC coupled interfaces. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The 100 Series contains temperature compensation. Features • Useful as Either 4:1 or 2:1 Multiplexer • VBB Output for Single-Ended Operation • PECL Mode Operating Range: VCC = 4.2 V to 5.7 V • • • • http://onsemi.com MARKING DIAGRAMS* 16 10EL57G AWLYWW 16 1 1 SO−16 D SUFFIX CASE 751B 16 100EL57G AWLYWW 1 A WL YY WW G = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package *For additional marking information, refer to Application Note AND8002/D. with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = −4.2 V to −5.7 V Internal Input Pulldown Resistors on All Inputs Q Outputs Will Default LOW with Inputs Open or at VEE Pb−Free Packages are Available* ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 November, 2006 − Rev. 7 1 Publication Order Number: MC10EL57/D MC10EL57, MC100EL57 Table 1. ATTRIBUTES Characteristics Value Internal Input Pulldown Resistor 75 KW Internal Input Pullup Resistor N/A ESD Protection Human Body Model Machine Model Charge Device Model > 1 kV > 100 V > 2 kV Moisture Sensitivity (Note 1) Level 1 Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in Transistor Count 109 Devices Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test 1. For additional Moisture Sensitivity information, refer to Application Note AND8003/D. VCC SEL0 SEL1 16 15 14 Q Q VBB1 13 12 11 VBB2 VEE 10 9 Table 3. FUNCTION TABLE 4:1 SEL1* SEL0* DATA OUT L L H H L H L H D0 D1 D2 D3 * Pin will default low when left open. 1 2 3 4 5 6 7 8 D0 D0 D1 D1 D2 D2 D3 D3 Figure 1. Logic Diagram and Pinout Assignment Table 2. PIN DESCRIPTION PIN FUNCTION D0−3, D0−3 ECL Diff Data Inputs SEL0,1 ECL MUX Select Inputs Q, Q ECL Data Outputs VBB1, VBB2 Reference Voltage Output VCC Positive Supply VEE Negative Supply http://onsemi.com 2 MC10EL57, MC100EL57 Table 4. MAXIMUM RATINGS Rating Unit VCC Symbol PECL Mode Power Supply Parameter VEE = 0 V Condition 1 8 V VEE NECL Mode Power Supply VCC = 0 V −8 V VI PECL Mode Input Voltage NECL Mode Input Voltage VEE = 0 V VCC = 0 V 6 −6 V V Iout Output Current Continuous Surge 50 100 mA mA IBB VBB Sink/Source ± 0.5 mA TA Operating Temperature Range −40 to +85 °C Tstg Storage Temperature Range −65 to +150 °C qJA Thermal Resistance (Junction−to−Ambient) 0 lfpm 500 lfpm SOIC−16 SOIC−16 130 75 °C/W °C/W qJC Thermal Resistance (Junction−to−Case) Standard Board SOIC−16 33 to 36 °C/W Tsol Wave Solder