MC10E416, MC100E416
5VECL Quint Differential
Line Receiver
Description
The MC10E416/100E416 is a 5-bit differential line receiving device.
The 2.0 GHz of bandwidth provided by the high frequency outputs
makes the device ideal for buffering of very high speed oscillators.
The design incorporates two stages of gain, internal to the device,
making it an excellent choice for use in high bandwidth amplifier
applications.
The differential inputs have internal clamp structures which will
force the Q output of a gate in an open input condition to go to a LOW
state. Thus, inputs of unused gates can be left open and will not affect
the operation of the rest of the device. Note that the input clamp will
take affect only if both inputs fall 2.5 V below VCC.
The VBB pin, an internally generated voltage supply, is available to
this device only. For single-ended input conditions, the unused
differential input is connected to VBB as a switching reference voltage.
VBB may also rebias AC coupled inputs. When used, decouple VBB
and VCC via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, VBB should be left open.
The 100 Series contains temperature compensation.
Features
x
x
x
x
x
x
Differential D and Q; VBB available
600 ps Max. Propagation Delay
High Frequency Outputs
2 Stages of Gain
http://onsemi.com
PLCCï28
FN SUFFIX
CASE 776
MARKING DIAGRAM*
1 28
MCxxxE416FNG
AWLYYWW
xxx
A
WL
YY
WW
G
= 10 or 100
= Assembly Location
= Wafer Lot
= Year
= Work Week
= PbïFree Package
*For additional marking information, refer to
Application Note AND8002/D.
PECL Mode Operating Range: VCC = 4.2 V to 5.7 V
with VEE = 0 V
NECL Mode Operating Range: VCC = 0 V
with VEE = ï4.2 V to ï5.7 V
Internal Input 50 kW Pulldown Resistors
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
x
x ESD Protection: Human Body Model; > 2 kV,
Machine Model; > 200 V
Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
x
x Moisture Sensitivity Level:
x
Pb = 1;
PbïFree = 3
For Additional Information, see Application Note AND8003/D
Flammability Rating: UL 94 Vï0 @ 0.125 in,
Oxygen Index: 28 to 34
Transistor Count = 201 devices
x
x PbïFree Packages are Available*
*For additional information on our PbïFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
¤ Semiconductor Components Industries, LLC, 2006
November, 2006 ï Rev. 7
1
Publication Order Number:
MC10E416/D
MC10E416, MC100E416
D3
D4
D4
VCCO
Q4
Q4
VCCO
25
24
23
22
21
20
19
18
Q3
27
17
Q3
28
16
VCC
15
Q2
D3
26
D2
D2
Pinout: 28-Lead PLCC
(Top View)
VEE
1
VBB
2
14
Q2
D0
3
13
VCCO
D0
4
12
Q1
5
6
7
8
9
10
11
D1
D1
VCCO
Q0
Q0
VCCO
Q1
* All VCC and VCCO pins are tied together on the die.
Warning: All VCC, VCCO, and VEE pins must be externally
connected to Power Supply to guarantee proper operation.
D0
Q0
D0
Q0
D1
Q1
D1
Q1
D2
Q2
D2
Q2
D3
Q3
D3
Q3
D4
Q4
D4
Q4
VBB
Figure 2. Logic Diagram
Figure 1. 28ïLean Pinout Assignment
Table 1. PIN DESCRIPTION
PIN
FUNCTION
D[0:4], D[0:4]
ECL Differential Data Inputs
Q[0:4], Q[0:4]
ECL Differential Data Outputs
VBB
Reference Voltage Output
VCC, VCCO
Positive Supply
VEE
Negative Supply
http://onsemi.com
2
MC10E416, MC100E416
Table 2. MAXIMUM RATINGS
Symbol
Parameter
Condition 1
VCC
PECL Mode Power Supply
VEE = 0 V
VI
PECL Mode Input Voltage
NECL Mode Input Voltage
VEE = 0 V
VCC = 0 V
Iout
Output Current
Continuous
Surge
IBB
VBB Sink/Source
TA
Operating Temperature Range
Tstg
Storage Temperature Range
qJA
Thermal Resistance (JunctionïtoïAmbient)
0 lfpm
500 lfpm
qJC
Thermal Resistance (JunctionïtoïCase)
Standard Board
Tsol
Wave Solder
Pb
PbïFree
Condition 2
VI v VCC
VI w VEE
Rating
Unit
8
V
6
ï6
V
V
50
100
mA
mA
r 0.5
mA
0 to +85
qC
ï65 to +150
qC
PLCCï28
PLCCï28
63.5
43.5
qC/W
qC/W
PLCCï28
22 to 26
qC/W
265
265
qC
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
3
MC10E416, MC100E416
Table 3. 10E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V, VEE = 0.0 V (Note 1)
0qC
Symbol
Min
Characteristic
25qC
Typ
Max
135
162
Min
85qC
Typ
Max
135
162
Min
Typ
Max
Unit
135
162
mA
IEE
Power Supply Current
VOH
Output HIGH Voltage (Note 2)
3980
4070
4160
4020
4105
4190
4090
4185
4280
mV
VOL
Output LOW Voltage (Note 2)
3050
3210
3370
3050
3210
3370
3050
3227
3405
mV
VIH
Input HIGH Voltage (SingleïEnded)
3830
3995
4160
3870
4030
4190
3940
4110
4280
mV
VIL
Input LOW Voltage (SingleïEnded)
3050
3285
3520
3050
3285
3520
3050
3302
3555
mV
VBB
Output Voltage Reference
3.62
3.73
3.65
3.75
3.69
3.81
V
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration) (Note 3)
2.7
5.0
2.7
5.0
2.7
5.0
V
IIH
Input HIGH Current
150
mA
IIL
Input LOW Current
150
0.5
150
0.3
0.5
0.25
0.3
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.06 V.
2. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V.
3. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
Table 4. 10E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = ï5.0 V (Note 4)
0qC
Symbol
Characteristic
Min
Typ
25qC
Max
Min
Typ
85qC
Max
Min
Typ
Max
Unit
IEE
Power Supply Current
135
162
135
162
135
162
mA
VOH
Output HIGH Voltage (Note 5)
ï1020
ï930
ï840
ï980
ï895
ï810
ï910
ï815
ï720
mV
VOL
Output LOW Voltage (Note 5)
ï1950
ï1790
ï1630
ï1950
ï1790
ï1630
ï1950
ï1773
ï1595
mV
VIH
Input HIGH Voltage (SingleïEnded)
ï1170
ï1005
ï840
ï1130
ï970
ï810
ï1060
ï890
ï720
mV
VIL
Input LOW Voltage (SingleïEnded)
ï1950
ï1715
ï1480
ï1950
ï1715
ï1480
ï1950
ï1698
ï1445
mV
VBB
Output Voltage Reference
ï1.38
ï1.27
ï1.35
ï1.25
ï1.31
ï1.19
V
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 6)
ï2.3
0.0
ï2.3
0.0
ï2.3
0.0
V
IIH
Input HIGH Current
150
mA
IIL
Input LOW Current
150
0.5
0.3
150
0.5
0.065
0.3
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
4. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.06 V.
5. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V.
6. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
http://onsemi.com
4
MC10E416, MC100E416
Table 5. 100E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V (Note 7)
0qC
Symbol
Min
Characteristic
25qC
Typ
Max
135
162
Min
85qC
Typ
Max
135
162
Min
Typ
Max
Unit
155
186
mA
IEE
Power Supply Current
VOH
Output HIGH Voltage (Note 8)
3975
4050
4120
3975
4050
4120
3975
4050
4120
mV
VOL
Output LOW Voltage (Note 8)
3190
3295
3380
3190
3255
3380
3190
3260
3380
mV
VIH
Input HIGH Voltage (SingleïEnded)
3835
3975
4120
3835
3975
4120
3835
3975
4120
mV
VIL
Input LOW Voltage (SingleïEnded)
3190
3355
3525
3190
3355
3525
3190
3355
3525
mV
VBB
Output Voltage Reference
3.62
3.74
3.62
3.74
3.62
3.74
V
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration) (Note 9)
2.7
5.0
2.7
5.0
2.7
5.0
V
IIH
Input HIGH Current
150
mA
IIL
Input LOW Current
150
0.5
0.3
150
0.5
0.25
0.5
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
7. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.8 V.
8. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V.
9. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
Table 6. 100E SERIES NECL DC CHARACTERISTICS VCCx = 0 V; VEE = ï5.0 V (Note 10)
0qC
Symbol
Characteristic
Min
25qC
Typ
Max
135
162
Min
85qC
Typ
Max
135
162
Min
Typ
Max
Unit
155
186
mA
ï950
ï880
mV
ï1740
ï1620
mV
ï1025
ï880
mV
ï1645
ï1475
mV
ï1.38
ï1.26
V
ï2.3
0.0
V
150
mA
IEE
Power Supply Current
VOH
Output HIGH Voltage (Note 11)
ï1025
ï950
ï880
ï1025
ï950
ï880
ï1025
VOL
Output LOW Voltage (Note 11)
ï1810
ï1705
ï1620
ï1810
ï1745
ï1620
ï1810
VIH
Input HIGH Voltage (SingleïEnded)
ï1165
ï1025
ï880
ï1165
ï1025
ï880
ï1165
VIL
Input LOW Voltage (SingleïEnded)
ï1810
ï1645
ï1475
ï1810
ï1645
ï1475
ï1810
VBB
Output Voltage Reference
ï1.38
ï1.26
ï1.38
ï1.26
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 12)
ï2.3
0.0
ï2.3
0.0
IIH
Input HIGH Current
IIL
Input LOW Current
150
0.5
0.3
150
0.5
0.25
0.5
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
10. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.8 V.
11. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V.
12. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.
http://onsemi.com
5
MC10E416, MC100E416
Table 7. AC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V or VCCx = 0.0 V; VEE = ï5.0 V (Note 13)
0qC
Symbol
Min
Characteristic
fMAX
Maximum Toggle Frequency
tPLH
tPHL
Propagation Delay to Output
tSKEW
Within-Device Skew (Note 14)
tSKEW
Duty Cycle Skew (Note 15)
tJITTER
Random Clock Jitter (RMS)
VPP(AC)
Input Voltage Swing
(Differential Configuration)
tr
tf
Rise/Fall Time
(20 - 80%)
Typ
25qC
Max
Min
Typ
85qC
Max
Min
Typ
Max
> 2.0
Unit
GHz
ps
d(Diff)
250
350
500
250
350
500
250
350
500
D(SE)
200
350
550
200
350
550
200
350
550
tPLH-tPHL
50
50
50
ps
r10
r10
r10
ps
很抱歉,暂时无法提供与“MC10E416FN”相匹配的价格&库存,您可以联系我们找货
免费人工找货