MC4558CDX

www.fairchildsemi.com MC4558 Dual Operational Amplifier Features Descriptions • • • • • • • The MC4558 series is a monolithic integrated circuit designed for dual operational amplifier. No frequency compensation required. No latch up. Large common mode and differential voltage range. Parameter tracking over temperature range. Gain and phase match between amplifiers. Internally frequency compensated. Low noise input transistors. 8-DIP 1 8-SOP 1 Internal Block Diagram Rev. 1.0.1 ©2001 Fairchild Semiconductor Corporation MC4558 Schematic Diagram (One Section Only) Absolute Maximum Ratings Parameter Value Unit VCC ±22 V VI(DIFF) 30 V Input Voltage VI ±15 V Power Dissipation PD 400 mW Operating Temperature Range MC4558C MC4558V TOPR 0 ~ 70 -40 ~ 85 °C Storage Temperature Range TSTG -65 ~ 150 °C Supply Voltage Differential Input Voltage 2 Symbol MC4558 Electrical Characteristics (VCC = 15V, VEE = - 15V ,TA = 25 °C unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Large Signal Voltage Gain Common Mode Input Voltage Range Symbol VIO Supply Voltage Rejection Ratio PSRR Output Voltage Swing VO(P.P) Power Consumption (Both Amplifiers) ICC PC Max - 2 6 - - 7.5 - 5 200 TA=TA(MAX) - - 300 TA =TA(MIN) - - 300 Unit mV nA - 30 500 TA=TA(MAX) - - 800 TA =TA(MIN) - - 800 20 200 - - - - ±12 ±13 - - - - 70 90 - - - - 76 90 - 76 90 - RL≥10KΩ ±12 ±14 - RL≥2KΩ ±10 ±13 - - 3.5 5.8 TA =TA(MAX) - - 5.0 TA =TA(MIN) - - 6.7 - 70 170 TA =TA(MAX) - - 150 Ta = TA(MIN) - - 200 1.2 - - V/µs VO(P-P)= ±10V,RL≤2KΩ Note 1 VI(R) CMRR Typ Note 1 IBIAS GV MC4558C/MC4558V Min RS≤10KΩ IIO Common Mode Rejection Ratio Supply Current (Both Amplifiers) Conditions Note 1 RS≤10KΩ Note 1 RS≤10KΩ Note 1 nA V/mV V dB dB V mA mW Slew Rate (Note2) SR VI =10V, RL≥2KΩ CI≤100pF Rise Time (Note2) TR VI =20mV, RL≥2KΩ CI≤100pF - 0.3 - µs Overshoot (Note2) OS VI =20mV, RL≥2KΩ CI≤100pF - 15 - % Note : 1. MC4558C : TA(MIN) ≤ TA ≤ TA(MAX) = 0 ≤ TA ≤ 70 °C , MC4558V : TA(MIN) ≤TA≤TA(MAX) = -40≤TA≤ +85 °C 2. Guaranteed by design. 3 MC4558 Typical Performance Characteristics 4 Figure 1. Burst Noise vs Source Resistance Figure 2. RMS Noise vs Source Resistance Figure 3. Output Noise vs Source Resistance Figure 4. Spectral Noise Density Figure 5. Open Loop Frequency Response Figure 6. Phase Margin vs Frequency MC4558 Typical Performance Characteristics (continued) Figure 7. Positive Output Voltage Swing vs Load Resistance Figure 8. Negative Output Voltage Swing vs Load Resistance Figure 9. Power Bandwidth (Large Signal Output Swing vs Frequency) 5 MC4558 Mechanical Dimensions Package 2.54 0.100 5.08 MAX 0.200 7.62 0.300 3.40 ±0.20 0.134 ±0.008 +0.10 0.25 –0.05 +0.004 0~15° 6 0.010 –0.002 3.30 ±0.30 0.130 ±0.012 0.33 0.013 MIN 0.060 ±0.004 #5 1.524 ±0.10 #4 0.018 ±0.004 #8 9.60 MAX 0.378 #1 9.20 ±0.20 0.362 ±0.008 ( 6.40 ±0.20 0.252 ±0.008 0.46 ±0.10 0.79 ) 0.031 8-DIP MC4558 Mechanical Dimensions (Continued) Package 8-SOP MIN #5 6.00 ±0.30 0.236 ±0.012 8° 0~ +0.10 0.15 -0.05 +0.004 0.006 -0.002 MAX0.10 MAX0.004 1.80 MAX 0.071 3.95 ±0.20 0.156 ±0.008 5.72 0.225 0.41 ±0.10 0.016 ±0.004 #4 1.27 0.050 #8 5.13 MAX 0.202 #1 4.92 ±0.20 0.194 ±0.008 ( 0.56 ) 0.022 1.55 ±0.20 0.061 ±0.008 0.1~0.25 0.004~0.001 0.50 ±0.20 0.020 ±0.008 7 MC4558 Ordering Information Product Number 8 Package MC4558CP 8-DIP MC4558CD 8-SOP MC4558VP 8-DIP MC4558VD 8-SOP Operating Temperature 0 ~ + 70°C -40 ~ +85°C MC4558 9 MC4558 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 6/1/01 0.0m 001 Stock#DSxxxxxxxx  2001 Fairchild Semiconductor Corporation