MJE3055TG

MJE2955T (PNP), MJE3055T (NPN) Complementary Silicon Plastic Power Transistors These devices are designed for use in general−purpose amplifier and switching applications. Features 10 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 60 VOLTS − 75 WATTS • High Current Gain − Bandwidth Product • These Devices are Pb−Free and are RoHS Compliant* MAXIMUM RATINGS Rating Symbol Value Unit VCEO 60 Vdc Collector−Base Voltage VCB 70 Vdc Emitter−Base Voltage VEB 5.0 Vdc Collector Current IC 10 Adc Base Current IB 6.0 Adc 75 0.6 W W/°C −55 to +150 °C Collector−Emitter Voltage Total Device Dissipation @ TC = 25°C Derate above 25°C PD (Note 1) Operating and Storage Junction Temperature Range TJ, Tstg www.onsemi.com PNP NPN COLLECTOR 2, 4 COLLECTOR 2, 4 1 BASE 1 BASE EMITTER 3 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Safe Area Curves are indicated by Figure 1. Both limits are applicable and must be observed. EMITTER 3 4 TO−220 CASE 221A−09 STYLE 1 1 2 3 THERMAL CHARACTERISTICS Characteristics Thermal Resistance, Junction−to−Case Symbol Max Unit RqJC 1.67 °C/W MARKING DIAGRAM MJExx55TG AY WW MJExx55T = Device Code xx = 29 or 30 G = Pb−Free Package A = Assembly Location Y = Year WW = Work Week ORDERING INFORMATION Package Shipping MJE2955TG Device TO−220 (Pb−Free) 50 Units / Rail MJE3055TG TO−220 (Pb−Free) 50 Units / Rail *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2015 January, 2015 − Rev. 12 1 Publication Order Number: MJE2955T/D MJE2955T (PNP), MJE3055T (NPN) ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Symbol Characteristic Min Max 60 − − 700 − − 1.0 5.0 − − 1.0 10 − 5.0 20 5.0 100 − − − 1.1 8.0 − 1.8 2.0 − Unit OFF CHARACTERISTICS Collector−Emitter Sustaining Voltage (Note 2) (IC = 200 mAdc, IB = 0) VCEO(sus) Collector Cutoff Current (VCE = 30 Vdc, IB = 0) ICEO Collector Cutoff Current (VCE = 70 Vdc, VEB(off) = 1.5 Vdc) (VCE = 70 Vdc, VEB(off) = 1.5 Vdc, TC = 150°C) ICEX Collector Cutoff Current (VCB = 70 Vdc, IE = 0) (VCB = 70 Vdc, IE = 0, TC = 150°C) ICBO Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO Vdc mAdc mAdc mAdc mAdc ON CHARACTERISTICS DC Current Gain (Note 2) (IC = 4.0 Adc, VCE = 4 0 Vdc) (IC = 10 Adc, VCE = 4.0 Vdc) hFE Collector−Emitter Saturation Voltage (Note 2) (IC = 4.0 Adc, IB = 0.4 Adc) (IC = 10 Adc, IB = 3.3 Adc) VCE(sat) Base−Emitter On Voltage (Note 2) (IC = 4.0 Adc, VCE = 4.0 Vdc) VBE(on) − Vdc Vdc DYNAMIC CHARACTERISTICS Current−Gain−Bandwidth Product (IC = 500 mAdc, VCE = 10 Vdc, f = 500 kHz) fT MHz Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 20%. www.onsemi.com 2 MJE2955T (PNP), MJE3055T (NPN) 10 7.0 5.0 IC, COLLECTOR CURRENT (AMP) 5.0 ms There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC − VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 1 is based on TJ(pk) = 150°C. TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) ≤ 150°C. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 100ms 1.0ms dc 3.0 2.0 1.0 0.7 0.5 TJ = 150°C SECOND BREAKDOWN LIMITED BONDING WIRE LIMITED THERMALLY LIMITED TC = 25°C (D = 0.1) 0.3 0.2 0.1 5.0 20 30 7.0 10 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 50 60 Figure 1. Active−Region Safe Operating Area 500 90 VCE = 2.0 V PD, POWER DISSIPATION (WATTS) hFE, DC CURRENT GAIN 300 200 TJ = 150°C 100 25°C 50 -55°C 30 20 10 5.0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 IC, COLLECTOR CURRENT (AMP) 5.0 80 70 60 50 30 20 10 0 10 MJE3055T MJE2955T 40 0 125 50 75 100 TC, CASE TEMPERATURE (°C) 25 Figure 2. DC Current Gain 150 175 5.0 10 Figure 3. Power Derating MJE2955T MJE3055T 2.0 1.4 TJ = 25°C 1.2 TJ = 25°C V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) 1.6 1.2 0.8 VBE(sat) @ IC/IB = 10 VBE @ VCE = 3.0 V 0.4 1.0 0.8 0.6 VBE @ VCE = 2.0 V 0.4 0.2 VCE(sat) @ IC/IB = 10 VCE(sat) @ IC/IB = 10 0 0.1 VBE(sat) @ IC/IB = 10 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 5.0 0 0.1 10 Figure 4. “On” Voltages www.onsemi.com 3 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−220 CASE 221A ISSUE AK DATE 13 JAN 2022 SCALE 1:1 STYLE 1: PIN 1. 2. 3. 4. BASE COLLECTOR EMITTER COLLECTOR STYLE 2: PIN 1. 2. 3. 4. BASE EMITTER COLLECTOR EMITTER STYLE 3: PIN 1. 2. 3. 4. CATHODE ANODE GATE ANODE STYLE 4: PIN 1. 2. 3. 4. MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2 STYLE 5: PIN 1. 2. 3. 4. GATE DRAIN SOURCE DRAIN STYLE 6: PIN 1. 2. 3. 4. ANODE CATHODE ANODE CATHODE STYLE 7: PIN 1. 2. 3. 4. CATHODE ANODE CATHODE ANODE STYLE 8: PIN 1. 2. 3. 4. CATHODE ANODE EXTERNAL TRIP/DELAY ANODE STYLE 9: PIN 1. 2. 3. 4. GATE COLLECTOR EMITTER COLLECTOR STYLE 10: PIN 1. 2. 3. 4. GATE SOURCE DRAIN SOURCE STYLE 11: PIN 1. 2. 3. 4. DRAIN SOURCE GATE SOURCE STYLE 12: PIN 1. 2. 3. 4. MAIN TERMINAL 1 MAIN TERMINAL 2 GATE NOT CONNECTED DOCUMENT NUMBER: DESCRIPTION: 98ASB42148B TO−220 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative