MM5Z4686T1G

DATA SHEET www.onsemi.com Zener Voltage Regulators 500 mW, Low IZ SOD−523 Surface Mount MM5Z4xxxTxG Series, SZMM5Z4xxxTxG Series SOD−523 CASE 502 STYLE 1 This series of Zener diodes is packaged in a SOD−523 surface mount package. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards. 1 Cathode 2 Anode MARKING DIAGRAM Features • • • • • • • • 500 mW Rating on FR−4 or FR−5 Board Wide Zener Reverse Voltage Range − 1.8 V to 43 V Low Reverse Current (IZT) − 50 mA Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class 3 (> 16 kV) per Human Body Model SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant* Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V−0 MAXIMUM RATINGS Rating Total Power Dissipation on FR−5 Board, (Note 1) @ TL = 75°C Derated above 75°C Thermal Resistance, (Note 2) Junction−to−Ambient Junction and Storage Temperature Range Symbol Max Units 500 4.0 mW mW/°C PD RqJA TJ, Tstg °C/W 250 °C −55 to +150 1 XX M G G 2 XX = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping† MM5Z4xxxT1G SOD−523 (Pb−Free) 3,000 / Tape & Reel SZMM5Z4xxxT1G SOD−523 (Pb−Free) 3,000 / Tape & Reel MM5Z4xxxT5G SOD−523 (Pb−Free) 8,000 / Tape & Reel SZMM5Z4xxxT5G SOD−523 (Pb−Free) 8,000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR−5 = 3.5 X 1.5 inches, using the minimum recommended footprint. 2. Thermal Resistance measurement obtained via infrared Scan Method. *For additional information on our Pb−Free strategy and soldering details, please download the onsemi Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2018 August, 2021 − Rev. 4 1 Publication Order Number: MM5Z4678T1/D MM5Z4xxxTxG Series, SZMM5Z4xxxTxG Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless I otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Symbol IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR IR VF IZT Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Zener Voltage Regulator www.onsemi.com 2 V MM5Z4xxxTxG Series, SZMM5Z4xxxTxG Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Zener Voltage (Note 3) VZ (Volts) Leakage Current @ IZT IR @ VR Device Marking Min Nom Max mA mA Volts 4A 1.71 1.8 1.89 50 7.5 1 MM5Z4679T1G/T5G* 42 1.90 2.0 2.10 50 5 1 MM5Z4680T1G/T5G 4C 2.09 2.2 2.31 50 4 1 MM5Z4681T1G/T5G* 4D 2.28 2.4 2.52 50 2 1 MM5Z4682T5G 4E 2.565 2.7 2.835 50 1 1 MM5Z4683T1G/T5G* 4F 2.85 3.0 3.15 50 0.8 1 MM5Z4684T1G/T5G* 4G 3.13 3.3 3.47 50 7.5 1.5 MM5Z4685T1G/T5G 4H 3.42 3.6 3.78 50 7.5 2 MM5Z4686T1G/T5G 43 3.70 3.9 4.10 50 5 2 MM5Z4687T1G/T5G 4J 4.09 4.3 4.52 50 4 2 MM5Z4688T1G/T5G 4K 4.47 4.7 4.94 50 10 3 MM5Z4689T1G/T5G 4L 4.85 5.1 5.36 50 10 3 MM5Z4690T1G/T5G 4M 5.32 5.6 5.88 50 10 4 MM5Z4691T1G/T5G* 4N 5.89 6.2 6.51 50 10 5 MM5Z4692T1G/T5G* 44 6.46 6.8 7.14 50 10 5.1 MM5Z4693T1G/T5G 4P 7.13 7.5 7.88 50 10 5.7 MM5Z4694T5G 4Q 7.79 8.2 8.61 50 1 6.2 MM5Z4695T1G/T5G* 4R 8.27 8.7 9.14 50 1 6.6 MM5Z4696T1G/T5G* 45 8.65 9.1 9.56 50 1 6.9 MM5Z4697T1G/T5G 4T 9.50 10 10.50 50 1 7.6 MM5Z4698T1G/T5G* 4U 10.45 11 11.55 50 0.05 8.4 MM5Z4699T5G 4V 11.40 12 12.60 50 0.05 9.1 MM5Z4700T1G/T5G* 4W 12.35 13 13.65 50 0.05 9.8 MM5Z4701T1G/T5G* 4X 13.30 14 14.70 50 0.05 10.6 MM5Z4702T5G 4Y 14.25 15 15.75 50 0.05 11.4 MM5Z4703T1G/T5G* 4Z 15.20 16 16.80 50 0.05 12.1 MM5Z4704T1G/T5G* 46 16.15 17 17.85 50 0.05 12.9 MM5Z4705T1G/T5G 47 17.10 18 18.90 50 0.05 13.6 MM5Z4706T1G/T5G* 5A 18.05 19 19.95 50 0.05 14.4 MM5Z4707T1G/T5G* 5C 19.00 20 21.00 50 0.01 15.2 MM5Z4708T1G/T5G* 5F 20.90 22 23.10 50 0.01 16.7 MM5Z4709T1G/T5G 5G 22.80 24 25.20 50 0.01 18.2 MM5Z4710T1G/T5G* 5H 23.75 25 26.25 50 0.01 19.0 MM5Z4711T1G/T5G 5K 25.65 27 28.35 50 0.01 20.4 MM5Z4712T1G/T5G* 5L 26.60 28 29.40 50 0.01 21.2 MM5Z4713T1G/T5G* 5N 28.50 30 31.50 50 0.01 22.8 MM5Z4714T1G/T5G 5P 31.35 33 34.65 50 0.01 25.0 MM5Z4715T1G/T5G 5Q 34.20 36 37.80 50 0.01 27.3 MM5Z4716T1G/T5G* 5R 37.05 39 40.95 50 0.01 29.6 MM5Z4717T1G/T5G 5T 40.85 43 45.15 50 0.01 32.6 Device* MM5Z4678T1G/T5G* 3. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C ±1°C. *Please Contact Sales. www.onsemi.com 3 MM5Z4xxxTxG Series, SZMM5Z4xxxTxG Series 8 θ VZ, TEMPERATURE COEFFICIENT (mV/°C) θ VZ, TEMPERATURE COEFFICIENT (mV/°C) TYPICAL CHARACTERISTICS 7 6 TYPICAL TC VALUES 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 VZ, NOMINAL ZENER VOLTAGE (V) 11 100 TYPICAL TC VALUES VZ @ IZT 10 1 12 10 100 VZ, NOMINAL ZENER VOLTAGE (V) Figure 1. Temperature Coefficients (Temperature Range − 55°C to +150°C) Figure 2. Temperature Coefficients (Temperature Range − 55°C to +150°C) Ppk , PEAK SURGE POWER (WATTS) 1000 1.0 PD versus TL 0.8 0.6 PD versus TA 0.4 0.2 0 0 25 50 75 100 T, TEMPERATURE (5C) 125 150 Figure 3. Steady State Power Derating RECTANGULAR WAVEFORM, TA = 25°C 100 10 1 0.1 1 10 PW, PULSE WIDTH (ms) TJ = 25°C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IZ = 1 mA 100 5 mA 20 mA 10 1 1 100 1000 Figure 4. Maximum Nonrepetitive Surge Power 1000 Z ZT, DYNAMIC IMPEDANCE ( Ω ) PD, POWER DISSIPATION (WATTS) 1.2 10 VZ, NOMINAL ZENER VOLTAGE Figure 5. Effect of Zener Voltage on Zener Impedance www.onsemi.com 4 100 MM5Z4xxxTxG Series, SZMM5Z4xxxTxG Series TYPICAL CHARACTERISTICS 1000 TA = 25°C 0 V BIAS 1 V BIAS C, CAPACITANCE (pF) I R , LEAKAGE CURRENT ( μA) 1000 100 BIAS AT 50% OF VZ NOM 10 1 1 10 VZ, NOMINAL ZENER VOLTAGE (V) 100 100 10 1 +150°C 0.1 0.01 0.001 +25°C 0.0001 -55°C 0.00001 0 10 Figure 6. Typical Capacitance 20 30 40 50 60 70 VZ, NOMINAL ZENER VOLTAGE (V) Figure 7. Typical Leakage Current 100 100 TA = 25°C I Z , ZENER CURRENT (mA) I Z , ZENER CURRENT (mA) TA = 25°C 10 1 0.1 0.01 80 0 2 4 6 8 VZ, ZENER VOLTAGE (V) 1 0.1 0.01 12 10 10 10 30 50 70 VZ, ZENER VOLTAGE (V) 90 Figure 9. Zener Voltage versus Zener Current (12 V to 91 V) Figure 8. Zener Voltage versus Zener Current (VZ Up to 12 V) www.onsemi.com 5 90 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 2 2 1 1 STYLE 1 STYLE 2 SOD−523 CASE 502 ISSUE E SCALE 4:1 −X− D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. −Y− E 2X b 0.08 1 M DATE 28 SEP 2010 2 X Y DIM A b c D E HE L L2 TOP VIEW A c HE RECOMMENDED SOLDERING FOOTPRINT* SIDE VIEW 2X 2X 2X MILLIMETERS MIN NOM MAX 0.50 0.60 0.70 0.25 0.30 0.35 0.07 0.14 0.20 1.10 1.20 1.30 0.70 0.80 0.90 1.50 1.60 1.70 0.30 REF 0.15 0.20 0.25 L 0.48 PACKAGE OUTLINE L2 1.80 2X 0.40 DIMENSION: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the onsemi Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. BOTTOM VIEW XX M XX 1 2 1 STYLE 1 XX M M GENERIC MARKING DIAGRAM* 2 STYLE 2 = Specific Device Code Date Code *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE DOCUMENT NUMBER: DESCRIPTION: STYLE 2: NO POLARITY 98AON11524D SOD−523 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales