MM74C32N

Revised January 2004 MM74C32 Quad 2-Input OR Gate General Description Features The MM74C32 employs complementary MOS (CMOS) transistors to achieve low power and high noise margin, these gates provide the basic functions used in the implementation of digital integrated circuit systems. The N- and P-channel enhancement mode transistors provide a symmetrical circuit with output swings essentially equal to the supply voltage. This results in high noise immunity over a wide supply voltage range. No DC power other than that caused by leakage current is consumed during static conditions. All inputs are protected against static discharge damage. ■ Wide supply voltage range: 3.0V to 15V ■ Guaranteed noise margin: 1.0V ■ High noise immunity: 0.45V VCC (typ.) ■ Low power TTL compatibility: fan out of 2 driving 74L Ordering Code: Order Number MM74C32N Package Number N14A Package Description 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Connection Diagram Top View © 2004 Fairchild Semiconductor Corporation DS005881 www.fairchildsemi.com MM74C32 Quad 2-Input OR Gate October 1987 MM74C32 Absolute Maximum Ratings(Note 1) Lead Temperature −0.3V to VCC + 0.3V Voltage at Any Pin Operating Temperature Range −55°C to +125°C Storage Temperature Range −65°C to +150°C 700 mW Small Outline 500 mW Operating VCC Range 260°C (Soldering, 10 seconds) Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that the devices should be operated at these limits. The Electrical Characteristics table provides conditions for actual device operation. Power Dissipation (PD) Dual-In-Line 18V Absolute Maximum VCC 3.0V to 15V DC Electrical Characteristics Min/Max limits apply across temperature range unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CMOS TO CMOS VIN(1) VIN(0) VOUT(1) VOUT(0) Logical “1” Input Voltage Logical “0” Input Voltage Logical “1” Output Voltage Logical “0” Output Voltage VCC = 5.0V 3.5 VCC = 10V 8.0 V VCC = 5.0V 1.5 VCC = 10V 2.0 VCC = 5.0V, IO = −10 µA 4.5 VCC = 10V, IO = −10 µA 9.0 V VCC = 5.0V, IO = 10 µA 0.5 VCC = 10V, IO = 10 µA 1.0 IIN(1) Logical “1” Input Current VCC = 15V, VIN = 15V IIN(0) Logical “0” Input Current VCC = 15V, VIN = 0V ICC Supply Current VCC = 15V 0.005 −1.0 V 1.0 −0.005 0.05 V µA µA 15 µA 0.8 V 0.4 V CMOS/LPTTL INTERFACE VIN(1) Logical “1” Input Voltage VCC = 4.75V VIN(0) Logical “0” Input Voltage VCC = 4.75V VCC − 1.5 VOUT(1) Logical “1” Output Voltage VCC = 4.75V, IO = −360 µA VOUT(0) Logical “0” Output Voltage VCC = 4.75V, IO = 360 µA V 2.4 V OUTPUT DRIVE (see Family Characteristics Data Sheet) TA = 25°C (short circuit current) ISOURCE Output Source Current VCC = 5.0V, VOUT = 0V −1.75 −3.3 mA VCC = 10V, VOUT = 0V −8.0 −15 mA VCC = 5.0V, VOUT = VCC 1.75 3.6 mA VCC = 10V, VOUT = VCC 8.0 16 mA Min (P-Channel) ISOURCE Output Source Current (P-Channel) ISINK Output Sink Current (N-Channel) ISINK Output Sink Current (N-Channel) AC Electrical Characteristics (Note 2) TA = 25°C, CL = 50 pF, unless otherwise specified Symbol Typ Max Propagation Delay Time to VCC = 5.0V 80 150 ns Logical “1” or “0” VCC = 10V 35 70 ns CIN Input Capacitance Any Input (Note 3) 5 pF CPD Power Dissipation Capacitance Per Gate (Note 4) 15 pF tpd Parameter Conditions Units Note 2: AC Parameters are guaranteed by DC correlated testing. Note 3: Capacitance is guaranteed by periodic testing. Note 4: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see Family Characteristics Application Note— AN-90. www.fairchildsemi.com 2 MM74C32 Quad 2-Input OR Gate Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 3 www.fairchildsemi.com