MM74C93N

Revised January 2004 MM74C93 4-Bit Binary Counter General Description Features The MM74C93 binary counter and complementary MOS (CMOS) integrated circuits constructed with N- and Pchannel enhancement mode transistors. The 4-bit binary counter can be reset to zero by applying high logic level on inputs R01 and R02, and a separate flip-flop on the A-bit enables the user to operate it as a divide-by-2, -8, or -16 divider. Counting occurs on the negative going edge of the input pulse. ■ Wide supply voltage range: 3V to 15V ■ Guaranteed noise margin: 1V ■ High noise immunity: 0.45 VCC (typ.) ■ Low power compatibility: Fan out of 2 TTL driving 74L ■ The MM74C93 follows the MM74L93 Pinout All inputs are protected against static discharge damage. Ordering Code: Order Number Package Number MM74C93N N14A Package Description 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Connection Diagram Truth Table 4-Bit Binary Counter Binary Count Sequence Count Top View Logic Diagram Output QD QC QB 0 L L L L 1 L L L H 2 L L H L 3 L L H H 4 L H L L 5 L H L H 6 L H H L 7 L H H H 8 H L L L 9 H L L H 10 H L H L 11 H L H H 12 H H L L 13 H H L H 14 H H H L 15 H H H H QA Output QA is connected to input B for binary count sequence. H = HIGH Level L = LOW Level X = Irrelevant © 2004 Fairchild Semiconductor Corporation DS005889 www.fairchildsemi.com MM74C93 4-Bit Binary Counter October 1987 MM74C93 Function Tables Reset/Count Function Table Reset Inputs Output R01 R02 R91 R92 QD QC QB QA H H L X L L L L H H X L L L L L X X H H H L L H X L X L Count L X L X Count L X X L Count X L L X Count Reset/Count Function Table Reset Output Inputs www.fairchildsemi.com R01 R02 QD QC QB QA H H L L L L L X Count X L Count 2 MM74C93 Absolute Maximum Ratings(Note 1) Voltage at Any Pin (Note 1) Operating Temperature Range (TA) −0.3V to VCC +0.3V −55°C to +125°C Power Dissipation (PD) Dual-In-Line 700 mW Small Outline 500 mW Operating VCC Range 3V to 15V 18V Absolute Maximum VCC Storage Temperature Range (TS) Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range”, they are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation. −65°C to +150°C Lead Temperature (TL) 260°C (Soldering, 10 seconds) DC Electrical Characteristics Min/Max limits apply across temperature range unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CMOS TO CMOS VIN(1) VIN(0) VOUT(1) VOUT(0) Logical “1” Input Voltage Logical “0” Input Voltage Logical “1” Output Voltage Logical “0” Output Voltage VCC = 5V 3.5 VCC = 10V 8.0 V VCC = 5V 1.5 VCC = 10V 2.0 VCC = 5V, IO = −10 µA 4.5 VCC = 10V, IO = −10 µA 9.0 V VCC = 5V, IO = +10 µA 0.5 VCC = 10V, IO = +10 µA 1.0 IIN(1) Logical “1” Input Current VCC = 15V, VIN = 15V IIN(0) Logical “0” Input Current VCC = 15V, VIN = 0V ICC Supply Current VCC = 15V 0.005 −1.0 V 1.0 −0.005 0.05 V µA µA 300 µA CMOS/LPTTL INTERFACE VIN(1) Logical “1” Input Voltage MM74C90, MM74C93 VIN(0) MM74C90, MM74C93 VOUT(1) VCC−1.5 V VCC = 4.75V 0.8 V Logical “1” Output Voltage MM74C90, MM74C93 VOUT(0) VCC = 4.75V Logical “0” Input Voltage VCC = 4.75V, IO = −360 µA 2.4 V Logical “0” Output Voltage MM74C90, MM74C93 VCC = 4.75V, IO = −360 µA 0.4 V OUTPUT DRIVE (See Family Characteristics Data Sheet) (Short Circuit Current) ISOURCE ISOURCE ISINK ISINK Output Source Current VCC = 5V, VOUT = 0V (P-Channel) TA = 25°C Output Source Current VCC = 10V, VOUT = 0V (P-Channel) TA = 25°C Output Sink Current VCC = 5V, VOUT = VCC (N-Channel) TA = 25°C Output Sink Current VCC = 10V, VOUT = VCC (N-Channel) TA = 25°C 3 −1.75 −3.3 mA −8.0 −15 mA 1.75 3.6 mA 8.0 16 mA www.fairchildsemi.com MM74C93 AC Electrical Characteristics (Note 2) TA = 25°C, CL = 50 pF, unless otherwise specified Symbol tpd0, tpd1 tpd0, tpd1 tpd0, tpd1 tpd0, tpd1 tpd0, tpd1 tpd0, tpd1 tpd0, tpd1 tpd0, tpd1 Typ Max Propagation Delay Time Parameter VCC = 5V Conditions Min 200 400 from AIN to QA VCC = 10 80 150 Propagation Delay Time from VCC = 5V 450 850 AIN to QB (MM74C93) VCC = 10V 160 300 Propagation Delay Time from VCC = 5V 450 800 AIN to QB (MM74C90) VCC = 10V 160 300 Propagation Delay Time VCC = 5V 500 1050 from AIN to QC (MM74C93) VCC = 10 200 400 Propagation Delay Time from VCC = 5V 500 1000 AIN to QC (MM74C93) VCC = 10V 200 400 Propagation Delay Time from VCC = 5V 600 1200 AIN to QD (MM74C93) VCC = 10V 250 500 Propagation Delay Time from VCC = 5V 450 800 AIN to QD (MM74C90) VCC = 10V 160 300 Propagation Delay Time from VCC = 5V 150 300 R01 or R02 to QA, QB, QC or QD VCC = 10V 75 150 Propagation Delay Time from VCC = 5V 200 400 R01 or R02 to QA, QB, QC or QD VCC = 10V 75 150 Propagation Delay Time from VCC = 5V 250 500 R91 or R92 to QA or QD VCC = 10V 100 200 Units ns ns ns ns ns ns ns ns (MM74C93) tpd0, tpd1 ns (MM74C90) tpd0, tpd1 ns (MM74C90) tPW tPW tPW tr, tf Min. R01 or R02 Pulse Width VCC = 5V 600 (MM74C93) VCC = 10V 30 125 Min. R01 or R02 Pulse Width VCC = 5V 600 250 250 (MM74C90) VCC = 10V 300 125 Min. R91 or R92 Pulse Width VCC = 5V 500 200 (MM74C90) VCC = 10V 250 100 Maximum Clock Rise VCC = 10V ns ns ns 15 µs and Fall Time VCC = 10V tW Minimum Clock Pulse Width VCC = 5V 250 100 VCC = 10V 100 50 fMAX Maximum Clock Frequency VCC = 5V 2 VCC = 10V 5 CIN Input Capacitance Any Input (Note 3) 5 pF CPD Power Dissipation Capacitance Per Package (Note 4) 45 pF 5 ns MHz Note 2: AC Parameters are guaranteed by DC correlated testing. Note 3: Capacitance is guaranteed by periodic testing. Note 4: CPD determines the no load ac power consumption of any CMOS device. For complete explanation see Family Characteristics application note— AN-90. www.fairchildsemi.com 4 MM74C93 AC Test Circuits Clock rise and fall time tr = t f = 20 ns Switching Time Waveforms MM74C90 and MM74C93 are solid line waveforms. Dashed line waveforms are for MM74C90 only. 5 www.fairchildsemi.com MM74C93 4-Bit Binary Counter Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6