Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
Revised May 2005
MM74HCT573 • MM74HCT574
Octal D-Type Latch • 3-STATE Octal D-Type Flip-Flop
General Description
Features
The
MM74HCT573
octal
D-type
latches
and
MM74HCT574 octal D-type flip-flop advanced silicon-gate
CMOS technology, which provides the inherent benefits of
low power consumption and wide power supply range, but
are LS-TTL input and output characteristic and pin-out
compatible. The 3-STATE outputs are capable of driving 15
LS-TTL loads. All inputs are protected from damage due to
static discharge by internal diodes to VCC and ground.
■ TTL input characteristic compatible
■ Typical propagation delay: 18 ns
■ Low input current: 1 PA maximum
■ Low quiescent current: 80 PA maximum
■ Compatible with bus-oriented systems
■ Output drive capability: 15 LS-TTL loads
When the MM74HCT573 Latch Enable input is HIGH, the
Q outputs will follow the D inputs. When the Latch Enable
goes LOW, data at the D inputs will be retained at the outputs until Latch Enable returns HIGH again. When a high
logic level is applied to the Output Control input, all outputs
go to a high impedance state, regardless of what signals
are present at the other inputs and the state of the storage
elements.
The MM74HCT574 are positive edge triggered flip-flops.
Data at the D inputs, meeting the setup and hold time
requirements, are transferred to the Q outputs on positive
going transitions of the Clock (CK) input. When a high logic
level is applied to the Output Control (OC) input, all outputs
go to a high impedance state, regardless of what signals
are present at the other inputs and the state of the storage
elements.
The MM74HCT devices are intended to interface between
TTL and NMOS components and standard CMOS devices.
These parts are also plug in replacements for LS-TTL
devices and can be used to reduce power consumption in
existing designs.
Ordering Codes:
Order Number
Package Number
MM74HCT573WM
M20B
MM74HCT573SJ
MM74HCT573MTC
M20D
MTC20
Package Description
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HCT573N
N20A
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
MM74HCT574WM
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
MM74HCT574SJ
MM74HCT574MTC
MM74HCT574N
M20D
MTC20
N20A
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
© 2005 Fairchild Semiconductor Corporation
DS010627
www.fairchildsemi.com
MM74HCT573 • MM74HCT574 Octal D-Type Latch • 3-STATE Octal D-Type Flip-Flop
February 1990
MM74HCT573 • MM74HCT574
Connection Diagrams
Truth Tables
MM74HCT573
Output
Control
LE
Data
Output
L
H
H
H
L
H
L
L
L
L
X
Q0
H
X
X
Z
H HIGH Level
L LOW Level
Q0 Level of output before steady-state input conditions were established.
Z High Impedance State
Top View
MM74HCT573
MM74HCT574
Output
Control
LE
Data
Output
H
H
L
n
n
L
L
L
L
X
Q0
H
X
X
Z
L
H
L
Q0
X
Z
n
Top View
MM74HCT574
www.fairchildsemi.com
2
HIGH Level
LOW Level
Level of output before steady-state input conditions were established.
Don’t Care
High Impedance State
Transition from LOW-to-HIGH
Recommended Operating
Conditions
Supply Voltage (VCC )
DC Input Voltage (VIN)
DC Output Voltage (VOUT)
Clamp Diode Current (IIK, IOK)
DC Output Current, per pin (IOUT)
DC VCC or GND Current, per pin (ICC)
Storage Temperature Range (TSTG)
0.5 to 7.0V
1.5 to VCC 1.5V
0.5 to VCC 0.5V
r 20 mA
r 35 mA
r 70 mA
65qC to 150qC
600 mW
S. O. Package only
500 mW
Max
Units
4.5
5.5
V
0
VCC
V
40
85
qC
500
ns
DC Input or Output Voltage
(VIN, VOUT)
Operating Temperature Range (TA)
Input Rise or Fall Times
tr, tf
Power Dissipation (PD)
(Note 3)
Min
Supply Voltage (VCC)
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur.
Note 2: Unless otherwise specified all voltages are referenced to ground.
Note 3: Power Dissipation temperature derating — plastic “N” package:
12 mW/qC from 65qC to 85qC.
Lead Temperature (TL)
260qC
(Soldering 10 seconds)
DC Electrical Characteristics
VCC
5V r 10% (unless otherwise specified)
Symbol
VIH
Parameter
TA
Conditions
25qC
Typ
Minimum HIGH Level
TA
40 to 85qC TA 55 to 125qC
Guaranteed Limits
Units
2.0
2.0
2.0
V
0.8
0.8
0.8
V
Input Voltage
VIL
Maximum LOW Level
Input Voltage
VOH
VOL
IIN
IOZ
Minimum HIGH Level
VIN
Output Voltage
|IOUT|
VIH or VIL
20 PA
VCC
VCC 0.1
VCC 0.1
VCC 0.1
|IOUT|
6.0 mA, VCC
4.5V
4.2
3.98
3.84
3.7
|IOUT|
7.2 mA, VCC
5.5V
5.7
4.98
4.84
4.7
V
Maximum LOW Level
VIN
Voltage
|IOUT|
VIH or VIL
20 PA
0
0.1
0.1
0.1
|IOUT|
6.0 mA, VCC
4.5V
0.2
0.26
0.33
0.4
|IOUT|
7.2 mA, VCC
5.5V
0.2
0.26
0.33
0.4
r0.1
r1.0
r1.0
PA
r0.5
r5.0
r10
PA
8.0
80
160
PA
1.5
1.8
2.0
mA
Maximum Input
VIN
Current
VIH or VIL
VCC or GND,
Maximum 3-STATE
VOUT
Output Leakage
Enable
VCC or GND
V
VIH or VIL
Current
ICC
Maximum Quiescent
VIN
Supply Current
IOUT
VIN
VCC or GND
0 PA
2.4V or 0.5V (Note 4)
Note 4: Measured per pin. All others tied to VCC or ground.
3
www.fairchildsemi.com
MM74HCT573 • MM74HCT574
Absolute Maximum Ratings(Note 1)
(Note 2)
MM74HCT573 • MM74HCT574
AC Electrical Characteristics MM74HCT573
VCC
5.0V, tr
tf
6 ns, TA 25qC (unless otherwise specified)
Symbol
Parameter
Typ
Guaranteed Limit
Units
CL
45 pF
17
27
ns
CL
45 pF
16
27
ns
tPZH
Maximum Enable Propagation Delay CL
45 pF
21
30
ns
tPZL
Control to Output
RL
1 k:
tPHZ
Maximum Disable Propagation Delay CL
5 pF
14
23
ns
tPLZ
Control to Output
1 k:
tPHL
Maximum Propagation Delay
tPLH
Data to Output
tPHL
Maximum Propagation Delay
tPLH
Latch Enable to Output
Conditions
RL
tW
Minimum Clock Pulse Width
15
ns
tS
Minimum Setup Time Data to Clock
5
ns
tH
Minimum Hold Time Clock to Data
12
ns
AC Electrical Characteristics MM74HCT573
VCC 5.0V
r 10%, tr tf
Symbol
6 ns (unless otherwise specified)
Parameter
tPHL
Maximum Propagation
tPLH
Delay Data to Output
tPHL
Maximum Propagation Delay
tPLH
Latch Enable to Output
tPZH
tPZL
TA
Conditions
25q
TA
Typ
40 to 85qC TA
55 to 125qC
Guaranteed Limits
Units
CL
50 pF
18
30
38
45
ns
CL
50 pF
17
30
44
53
ns
Maximum Enable Propagation
CL
50 pF
22
30
38
45
ns
Delay Control to Output
RL
1 k:
15
30
38
45
ns
6
12
15
18
ns
tPHZ
Maximum Disable Propagation
CL
50 pF
tPLZ
Delay Control to Output
RL
1 k:
CL
50 pF
tTHL
Maximum Output
tTLH
Rise and Fall Time
tW
Minimum Clock Pulse Width
15
20
24
ns
tS
Minimum Setup Time Data to Clock
3
5
6
8
ns
tH
Minimum Hold Time Clock to Data
4
12
15
18
ns
CIN
Maximum Input Capacitance
10
10
10
pF
COUT
Maximum Output Capacitance
20
20
20
CPD
Power Dissipation Capacitance
OC
VCC
(Note 5)
OC
GND
Note 5: CPD determines the no load dynamic power consumption, PD
IS CPD VCC fICC.
www.fairchildsemi.com
5
52
CPD VCC2 fICC VCC, and the no load dynamic current consumption,
4
pF
pF
VCC
5.0V, tr
tf
MM74HCT573 • MM74HCT574
AC Electrical Characteristics
MM74HCT574
6 ns, TA 25qC
Symbol
Parameter
fMAX
Maximum Clock Frequency
tPHL
Maximum Propagation Delay
tPLH
to Output
tPZH
tPZL
Conditions
Typ
Guaranteed Limit
Units
60
33
MHz
CL
45 pF
17
27
ns
Maximum Enable Propagation Delay
CL
45 pF
19
28
ns
Control to Output
RL
1 k:
tPHZ
Maximum Disable Propagation Delay
CL
45 pF
14
25
ns
tPLZ
Control to Output
RL
1 k:
tW
Minimum Clock Pulse Width
15
ns
tS
Minimum Setup Time Data to Clock
12
ns
tH
Minimum Hold Time Clock to Data
5
ns
AC Electrical Characteristics MM74HCT574
VCC
5.0V r 10%, tr
Symbol
tf 6 ns (unless otherwise specified)
Parameter
Conditions
TA
25qC
Typ
fMAX
Maximum Clock Frequency
tPHL
Maximum Propagation Delay
tPLH
Clock to Output
tPZH
tPZL
TA
40 to 85qC TA
55 to 125qC
Units
Guaranteed Limits
33
28
23
MHz
CL
50 pF
18
30
38
45
ns
Maximum Enable Propagation
CL
50 pF
22
30
38
45
ns
Delay Control to Output
RL
1 k:
15
30
38
45
ns
6
12
15
18
ns
ns
tPHZ
Maximum Disable Propagation
CL
50 pF
tPLZ
Delay Control to Output
RL
1 k:
CL
50 pF
tTHL
Maximum Output
tTLH
Rise and Fall Time
tW
Minimum Clock Pulse Width
15
20
24
tS
Minimum Setup Time Data to Clock
6
12
15
18
ns
tH
Minimum Hold Time Clock to Data
1
5
6
8
ns
CIN
Maximum Input Capacitance
10
10
10
pF
COUT
Maximum Output Capacitance
20
20
20
pF
CPD
Power Dissipation Capacitance
OC
V CC
5
(Note 6)
OC
GND
58
Note 6: CPD determines the no load power consumption, PD
pF
CPD VCC2 f ICC VCC, and the no load dynamic current consumption, IS
5
CPD VCC f ICC.
www.fairchildsemi.com
MM74HCT573 • MM74HCT574
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Package Number M20B
www.fairchildsemi.com
6
MM74HCT573 • MM74HCT574
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
7
www.fairchildsemi.com
MM74HCT573 • MM74HCT574
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
www.fairchildsemi.com
8
MM74HCT573 • MM74HCT574 Octal D-Type Latch • 3-STATE Octal D-Type Flip-Flop
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N20A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
9
www.fairchildsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com