MPS2369RLRAG

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. ON Semiconductor
MPS2369 MPS2369A* Switching Transistors NPN Silicon *ON Semiconductor Preferred Device MAXIMUM RATINGS Rating Symbol Value Unit Collector–Emitter Voltage VCEO 15 Vdc Collector–Emitter Voltage VCES 40 Vdc Collector–Base Voltage VCBO 40 Vdc Emitter–Base Voltage VEBO 4.5 Vdc Collector Current — Continuous IC 200 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C TJ, Tstg –55 to +150 °C Symbol Max Unit RJA 200 °C/W Operating and Storage Junction Temperature Range 1 2 3 CASE 29–11, STYLE 1 TO–92 (TO–226AA) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient COLLECTOR 3 2 BASE 1 EMITTER ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit V(BR)CEO 15 — — Vdc V(BR)CES 40 — — Vdc V(BR)CBO 40 — — Vdc V(BR)EBO 4.5 — — Vdc — — — — 0.4 30 — — 0.4 OFF CHARACTERISTICS Collector–Emitter Breakdown Voltage(1) (IC = 10 mAdc, IB = 0) MPS2369A Collector–Emitter Breakdown Voltage (IC = 10 µAdc, VBE = 0) MPS2369,A Collector–Base Breakdown Voltage (IC = 10
Adc, IE = 0) MPS2369,A Emitter–Base Breakdown Voltage (IE = 10
Adc, IC = 0) MPS2369,A Collector Cutoff Current (VCB = 20 Vdc, IE = 0) (VCB = 20 Vdc, IE = 0, TA = 125°C) MPS2369,A Collector Cutoff Current (VCE = 20 Vdc, VBE = 0) MPS2369,A µAdc ICBO ICES µAdc 1. Pulse Test: Pulse Width
300
s, Duty Cycle
2.0%. Preferred devices are ON Semiconductor recommended choices for future use and best overall value.  Semiconductor Components Industries, LLC, 2001 June, 2001 – Rev. 2 1 Publication Order Number: MPS2369/D MPS2369 MPS2369A ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Symbol Characteristic Min Typ Max Unit — 20 40 40 20 30 20 20 — — — — — — — — 120 — 120 — — — — — — — — — — — — — — — 0.25 0.20 0.30 0.25 0.50 0.7 0.5 — — — — — — — — 0.85 — 1.02 1.15 1.60 Cobo — — 4.0 pF hfe 5.0 — — — ts — 5.0 13 ns ton — 8.0 12 ns toff — 10 18 ns ON CHARACTERISTICS DC Current Gain(1) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc, TA = –55°C) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 0.35 Vdc) (IC = 10 mAdc, VCE = 0.35 Vdc, TA = –55°C) (IC = 30 mAdc, VCE = 0.4 Vdc) (IC = 100 mAdc, VCE = 2.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) Collector–Emitter Saturation Voltage(1) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 10 mAdc, IB = 1.0 mAdc, TA = +125°C) (IC = 30 mAdc, IB = 3.0 mAdc) (IC = 100 mAdc, IB = 10 mAdc) hFE MPS2369A MPS2369 MPS2369 MPS2369A MPS2369A MPS2369A MPS2369 MPS2369A — VCE(sat) MPS2369 MPS2369A MPS2369A MPS2369A MPS2369A Base–Emitter Saturation Voltage(1) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 10 mAdc, IB = 1.0 mAdc, TA = +125°C) (IC = 10 mAdc, IB = 1.0 mAdc, TA = –55°C) (IC = 30 mAdc, IB = 3.0 mAdc) (IC = 100 mAdc, IB = 10 mAdc) Vdc VBE(sat) MPS2369 MPS2369A MPS2369A MPS2369A MPS2369A Vdc SMALL–SIGNAL CHARACTERISTICS Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) MPS2369,A Small–Signal Current Gain (IC = 10 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS2369,A SWITCHING CHARACTERISTICS Storage Time (IB1 = IB2 = IC = 10 mAdc) (Figure 3) MPS2369,A Turn–On Time (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = 3.0 mAdc) (Figure 1) MPS2369,A Turn–Off Time (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = 3.0 mAdc, IB2 = 1.5 mAdc) (Figure 2) MPS2369,A 1. Pulse Test: Pulse Width
300
s, Duty Cycle
2.0%. http://onsemi.com 2 MPS2369 MPS2369A 3.0 V t1 +10.6 V 0 -1.5 V 270 3.3 k < 1.0 ns CS* < 4.0 pF PULSE WIDTH (t1) = 300 ns DUTY CYCLE = 2.0% Figure 1. ton Circuit +10.75 V t1 3.0 V 0 -4.15 V 270 < 1.0 ns 3.3 k PULSE WIDTH (t1) = 300 ns DUTY CYCLE = 2.0% CS* < 4.0 pF Figure 2. toff Circuit +6.0 V t1 10 V 980 0 -4.0 V 500 < 1.0 ns PULSE WIDTH (t1) = 300 ns DUTY CYCLE = 2.0% CS* < 3.0 pF Figure 3. Storage Test Circuit *Total shunt capacitance of test jig and connectors. http://onsemi.com 3 MPS2369 MPS2369A PACKAGE DIMENSIONS TO–92 (TO–226) CASE 29–11 ISSUE AL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L SEATING PLANE K DIM A B C D G H J K L N P R V D X X G J H V C SECTION X–X 1 N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- N ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800–282–9855 Toll Free USA/Canada http://onsemi.com 4 MPS2369/D