MPS4250G

MPS4250 Transistor PNP Silicon Features • This is a Pb−Free Device* MAXIMUM RATINGS Rating Collector − Emitter Voltage Collector − Emitter Voltage Collector − Base Voltage Emitter − Base Voltage Collector Current − Continuous Total Device Dissipation @ TA = 25°C Derate above 25°C Total Device Dissipation @ TC = 25°C Derate above 25°C Operating and Storage Junction Temperature Range Symbol VCEO VCES VCBO VEBO IC PD PD TJ, Tstg Value −40 −40 −40 −5.0 −50 625 5.0 1.5 12 −55 to +150 Unit Vdc Vdc Vdc Vdc mAdc W mW/°C W mW/°C °C http://onsemi.com COLLECTOR 3 2 BASE 1 EMITTER THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction−to−Ambient Thermal Resistance, Junction−to−Case Symbol RqJA RqJC Max 200 83.3 Unit °C/W °C/W 3 STRAIGHT LEAD BULK PACK 12 1 3 BENT LEAD TAPE & REEL AMMO PACK 2 TO−92 1 WATT (TO−226) CASE 29−10 STYLE 1 MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. MPS 4250 AYWW G G A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device MPS4250G Package TO−92 (Pb−Free) Shipping† 5000 / Tape & Reel *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2010 August, 2010 − Rev. 5 1 Publication Order Number: MPS4250/D MPS4250 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic OFF CHARACTERISTICS Collector − Emitter Breakdown Voltage (IC = −5.0 mA) Collector − Emitter Sustaining Voltage (Note 1) (IC = −5.0) Collector − Base Breakdown Voltage (IC = −10 mA) Emitter − Base Breakdown Voltage (IE = −10 mA) Collector Cutoff Current (VCB = −50 V) (VCB = −40 V, TA = 65°C) Emitter Cutoff Current (VEB = −3.0 V) ON CHARACTERISTICS DC Current Gain (IC = −1.0 mA, VCE = −5.0 V) (IC = −10 mA, VCE = −5.0 V) Collector − Emitter Saturation Voltage (Note 1) (IC = −10 mA, IB = −0.5 mA) Base − Emitter Saturation Voltage (Note 1) (IC = −10 mA, IB = −0.5 mA) SMALL− SIGNAL CHARACTERISTICS Output Capacitance (VCB = −5.0 V, f = 1.0 MHz) Input Capacitance (VEB = −0.5 V, f = 1.0 MHz) Small−Signal Current Gain (IC = −1.0 mA, VCE = −5.0 V, f = 1.0 kHz) (IC = −0.5 mA, VCE = −5.0 V, f = 20 MHz) Noise Figure (IC = −20 mA, VCE = −5.0 V, RS = 10 kW, f = 1.0 kHz, PBW = 150 Hz) (IC = −250 mA, VCE = −5.0 V, RS = 1.0 kW, f = 1.0 kHz, PBW = 150 Hz) 1. Pulse Test: Pulse Width = 300 ms; Duty Cycle = 2.0%. Cobo Cibo hfe − − 6.0 16 pF pF − hFE 250 250 − − − − −0.25 −0.9 − V(BR)CES V(BR)CEO(sus) V(BR)CBO V(BR)EBO ICBO −40 −40 −40 −5.0 − − − − Vdc Vdc Vdc Vdc Symbol Min Max Unit − − − −10 −3.0 −20 nA mA nA IEBO VCE(sat) VBE(sat) Vdc Vdc 250 2.0 − − 800 − 2.0 2.0 NF dB http://onsemi.com 2 MPS4250 PACKAGE DIMENSIONS TO−92 (TO−226) 1 WATT CASE 29−10 ISSUE O A B P F L K STRAIGHT LEAD BULK PACK NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN DIMENSIONS P AND L. DIMENSIONS D AND J APPLY BETWEEN DI­ MENSIONS L AND K MINIMUM. THE LEAD DIMENSIONS ARE UNCONTROLLED IN DIMENSION P AND BEYOND DIMENSION K MINIMUM. DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.021 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 --0.250 --0.080 0.105 --0.100 0.135 --0.135 --MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.53 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 --6.35 --2.04 2.66 --2.54 3.43 --3.43 --- R XX H V 1 D G J C N N SECTION X−X STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR A R B P T SEATING PLANE BENT LEAD TAPE & REEL AMMO PACK K NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN DIMENSIONS P AND L. DIMENSIONS D AND J APPLY BETWEEN DIMENSIONS L AND K MINIMUM. THE LEAD DIMENSIONS ARE UNCONTROLLED IN DIMENSION P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G J K N P R V INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.021 0.094 0.102 0.018 0.024 0.500 --0.080 0.105 --0.100 0.135 --0.135 --MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.53 2.40 2.80 0.46 0.61 12.70 --2.04 2.66 --2.54 3.43 --3.43 --- G XX V 1 D J C N SECTION X−X ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 3 MPS4250/D