MPSA12RLRAG

MPSA12 Darlington Transistors NPN Silicon Features • Pb−Free Packages are Available* MAXIMUM RATINGS Rating Collector −Emitter Voltage Emitter Base Voltage Total Device Dissipation @ TA = 25°C Derate above 25°C Operating and Storage Junction Temperature Range Symbol VCES VEBO PD TJ, Tstg Value 20 10 625 5.0 −55 to +150 Unit Vdc Vdc mW mW/°C °C http://onsemi.com COLLECTOR 3 BASE 2 EMITTER 1 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction−to−Ambient Symbol RqJA Max 200 Unit °C/W MARKING DIAGRAM Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1 2 3 TO−92 CASE 29−11 STYLE 1 MPS A12 AYWW G G RS in en IDEAL TRANSISTOR MPSA12 = Device Code A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device MPSA12 MPSA12G Package TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) Shipping † 5,000 Units/Box 5,000 Units/Box 2,000/Tape & Reel 2,000/Tape & Reel 2,000/Tape & Reel 2,000/Tape & Reel Figure 1. Transistor Noise Model MPSA12RLRA MPSA12RLRAG MPSA12RLRP MPSA12RLRPG *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 1 January, 2006 − Rev. 1 Publication Order Number: MPSA12/D MPSA12 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 100 mAdc, IB = 0) Collector Cutoff Current (VCB= 15 Vdc, IE = 0) Emitter Cutoff Current (VEB= 12 Vdc, IC = 0) ON CHARACTERISTICS DC Current Gain (IC = 10 mAdc, VCE = 5.0 Vdc) Collector −Emitter Saturation Voltage (IC = 10 mAdc, IB = 0.01 mAdc) Base −Emitter On Voltage (IC = 10 mAdc, VCE = 5.0 Vdc) hFE 20,000 VCE(sat) VBE(on) − − − 1.0 1.4 Vdc Vdc − V(BR)CES ICBO IEBO 20 − − − 100 100 Vdc nAdc nAdc Symbol Min Max Unit r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.7 0.5 0.3 0.2 D = 0.5 0.2 0.05 SINGLE PULSE SINGLE PULSE ZqJC(t) = r(t) • RqJC TJ(pk) − TC = P(pk) ZqJC(t) ZqJA(t) = r(t) • RqJA TJ(pk) − TA = P(pk) ZqJA(t) 0.2 0.5 1.0 2.0 5.0 10 20 50 t, TIME (ms) 100 200 500 1.0 k 2.0 k 5.0 k 10 k 0.1 0.1 0.07 0.05 0.03 0.02 0.01 0.1 Figure 2. Thermal Response http://onsemi.com 2 MPSA12 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AL A R P L SEATING PLANE B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− K XX G H V 1 D J C SECTION X−X N N STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan : ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 3 MPSA12/D