MSR1560

MSR1560G, MSRF1560G Switch-mode Soft Recovery Power Rectifier These state−of−the−art devices are designed for boost converter or hard−switched converter applications, especially for Power Factor Correction application. It could also be used as a free wheeling diode in variable speed motor control applications and switching mode power supplies. Features • Soft Recovery with Low Reverse Recovery Charge (QRR) and Peak • • • • • Reverse Recovery Current (IRRM) Epoxy meets UL 94 V−0 @ 0.125 in Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction These are Pb−Free Devices http://onsemi.com SOFT RECOVERY POWER RECTIFIER 15 AMPERES, 600 VOLTS 1 4 3 4 4 Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads Readily Solderable • Lead Temperature for Soldering Purposes: 3 TO−220AC CASE 221B STYLE 1 260°C Max. for 10 Seconds MAXIMUM RATINGS Rating Symbol Value Unit VRRM VRWM VR 600 V IO 15 A Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz,TC = 125°C) IFRM 30 A Non−Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 100 A TJ, Tstg −65 to +150 °C Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 125°C) Operating Junction and Storage Temperature Range THERMAL CHARACTERISTICS Parameter Symbol Value MSR1560G: Thermal Resistance Junction−to−Case Junction−to−Ambient RqJC RqJA 1.6 72.8 MSRF1560G: Thermal Resistance Junction−to−Case Junction−to−Ambient RqJC RqJA 4.25 75 Unit °C/W °C/W February, 2014 − Rev. 7 1 3 TO−220 FULLPAK CASE 221AG STYLE 1 MARKING DIAGRAMS AY WWG MSR1560 KA A Y WW G KA AYWWG MSRF1560 KA = Assembly Location = Year = Work Week = Pb−Free Package = Diode Polarity ORDERING INFORMATION Device Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. © Semiconductor Components Industries, LLC, 2014 1 1 Package Shipping MSR1560G TO−220AC (Pb−Free) 50 Units/Rail MSRF1560G TO−220FP (Pb−Free) 50 Units/Rail Publication Order Number: MSR1560/D MSR1560G, MSRF1560G ELECTRICAL CHARACTERISTICS Characteristic Symbol Instantaneous Forward Voltage (Note 1) (IF = 15 A) Maximum Typical VF Instantaneous Reverse Current (VR = 600 V) Maximum Typical IR Reverse Recovery Time (Note 2) (VR = 30 V, IF = 1 A, di/dt = 100 A/ms) Maximum Typical trr Typical Recovery Softness Factor (VR = 30 V, IF = 1 A, di/dt = 100 A/ms) Value Unit V TJ = 25°C TJ = 150°C 1.8 1.5 1.4 1.2 TJ = 25°C TJ = 150°C 15 0.4 5000 100 TJ = 25°C TJ = 100°C 45 35 65 54 s = tb/ta 0.67 0.74 Typical Peak Reverse Recovery Current (VR = 30 V, IF = 1 A, di/dt = 100 A/ms) IRRM 2.3 3.2 A Typical Reverse Recovery Charge (VR = 30 V, IF = 1 A, di/dt = 100 A/ms) QRR 31 78 nC mA ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width ≤ 380 ms, Duty Cycle ≤ 2% 2. TRR measured projecting from 25% of IRRM to zero current 100 100 zl VF @ 150°C IF, INSTANTANEOUS FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) VF @ 150°C VF @ 25°C 10 VF @ 100°C 1 0.1 0.3 0.7 1.1 1.5 1.9 2.3 VF, INTANTANEOUS VOLTAGE (VOLTS) VF @ 25°C 10 VF @ 100°C 1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 VF, INSTANTANEOUS FORWARD CURRENT (AMPS) 2.7 Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage http://onsemi.com 2 MSR1560G, MSRF1560G 1000 IR, REVERSE CURRENT (mA) 1000 IR @ 150°C 100 IR @ 100°C 10 1 0.1 IR @ 25°C 0 100 200 300 400 500 IF(AV), AVERAGE FORWARD IR @ 150°C 10 IR @ 100°C 1 0.1 IR @ 25°C 0.01 0.001 600 0 100 200 500 Figure 3. Maximum Reverse Current Figure 4. Typical Reverse Current 600 30 dc TJ = 150°C TJ = 150°C 20 15 Square Wave 10 Square Wave dc 10 5 0 50 100 200 150 0 0 10 20 TC, CASE TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Current Derating Figure 6. Power Dissipation 350 400 TJ = 25°C TJ = 25°C 300 C, CAPACITANCE (pF) 350 300 250 200 150 100 250 200 150 100 50 50 0 400 VR, REVERSE VOLTAGE (VOLTS) 20 0 300 VR, REVERSE VOLTAGE (VOLTS) 25 C, CAPACITANCE (pF) 100 PF(AV), AVERAGE POWER DISSIPATION (WATTS) IR, REVERSE CURRENT (mA) 10000 0 10 20 30 40 0 0 50 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 7. Maximum Capacitance Figure 8. Typical Capacitance http://onsemi.com 3 50 MSR1560G, MSRF1560G 60 80 60 Time (nsec) Trr vs. di/dt @ 25°C 40 30 ta vs. di/dt @ 25°C 20 0 25 ta tb 20 tb vs. di/dt @ 25°C 10 trr 40 100 175 0 25 250 75 125 dI/dt (A/mS) TEMPERATURE (°C) Figure 9. Typical Trr vs. di/dt Figure 10. Typical Trr vs. Temperature QRR, REVERSE RECOVERY CHARGE (nC) Time (nsec) 50 175 3 40 IF = 1 A TJ = 25°C 2 0 IF = 1 A 30 TJ = 25°C 20 1 25 75 125 175 225 25 100 175 dI/dt (A/mS) dIF/dt (A/mS)) Figure 11. Typical Peak Reverse Recovery Current Figure 12. Typical Reverse Recovery Charge EOFF, SWITCHING OFF LOSSES (mJ) IRRM, PEAK RECOVERY CURRENT (AMPS) 50 65 55 IF = 1 A VR = 30 V 45 35 25 25 100 175 dIF/dt (A/mS) Figure 13. Typical Switching Off Losses http://onsemi.com 4 250 250 MSR1560G, MSRF1560G R(t), TRANSIENT THERMAL RESISTANCE 10 ID = 0.5 1 0.1 0.05 0.01 Single Pulse 0.1 0.0001 0.001 0.01 0.1 1 10 t, Time (S) Figure 14. Transient Thermal Response r(t), TRANSIENT THERMAL RESPONSE (NORMALIZED) (°C/W) 10 D = 0.5 1.0 0.1 0.2 0.1 0.05 0.02 P(pk) 0.01 0.01 0.001 0.000001 t1 SINGLE PULSE 0.00001 t2 DUTY CYCLE, D = t1/t2 0.0001 0.001 0.01 t, TIME (s) 0.1 1.0 ZqJC(t) = r(t) RqJC RqJC = 1.6°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZqJC(t) 10 Figure 15. Thermal Response, (MSRF1560) Junction−to−Case (RqJC) http://onsemi.com 5 100 1000 MSR1560G, MSRF1560G r(t), TRANSIENT THERMAL RESPONSE (NORMALIZED) (°C/W) 100 10 D = 0.5 0.2 0.1 0.05 0.02 1.0 0.01 P(pk) 0.1 0.01 0.001 0.000001 t1 SINGLE PULSE 0.00001 t2 DUTY CYCLE, D = t1/t2 0.0001 0.001 0.01 t, TIME (s) 0.1 1.0 ZqJC(t) = r(t) RqJC RqJC = 1.6°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZqJC(t) 10 Figure 16. Thermal Response, (MSRF1560) Junction−to−Ambient (RqJA) http://onsemi.com 6 100 1000 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−220, 2−LEAD CASE 221B−04 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q SCALE 1:1 F S T DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D J G STYLE 1: PIN 1. 2. 3. 4. DOCUMENT NUMBER: DESCRIPTION: 98ASB42149B TO−220, 2−LEAD CATHODE N/A ANODE CATHODE DATE 12 APR 2013 STYLE 2: PIN 1. 2. 3. 4. INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.039 0.142 0.161 0.190 0.210 0.110 0.130 0.014 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 1.00 3.61 4.09 4.83 5.33 2.79 3.30 0.36 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 ANODE N/A CATHODE ANODE Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative