MT9V034W00STMC13CC1-750

MT9V034 1/3‐Inch Wide‐VGA CMOS Digital Image Sensor General Description The MT9V034 is a 1/3-inch wide-VGA format CMOS active-pixel digital image sensor with global shutter and high dynamic range (HDR) operation. The sensor has specifically been designed to support the demanding interior and exterior surveillance imaging needs, which makes this part ideal for a wide variety of imaging applications in real-world environments. This wide-VGA CMOS image sensor features ON Semiconductor’s breakthrough low-noise CMOS imaging technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. The active imaging pixel array is 752 H x 480 V. It incorporates sophisticated camera functions on-chip-such as binning 2 x 2 and 4 x 4, to improve sensitivity when operating in smaller resolutions-as well as windowing, column and row mirroring. It is programmable through a simple two-wire serial interface. The MT9V034 can be operated in its default mode or be programmed for frame size, exposure, gain setting, and other parameters. The default mode outputs a wide-VGA-size image at 60 frames per second (fps). An on-chip analog-to-digital converter (ADC) provides 10 bits per pixel. A 12-bit resolution companded for 10 bits for small signals can be alternatively enabled, allowing more accurate digitization for darker areas in the image. In addition to a traditional, parallel logic output the MT9V034 also features a serial low-voltage differential signaling (LVDS) output. The sensor can be operated in a stereo-camera, and the sensor, designated as a stereo-master, is able to merge the data from itself and the stereo-slave sensor into one serial LVDS stream. The sensor is designed to operate in a wide temperature range (–30°C to +70°C). Features www.onsemi.com CLCC48 11.43 x 11.43 CASE 848AN ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. • ADC: On-chip, 10-bit Column-parallel • • • • Array format: Wide-VGA, Active 752 H x 480 V (360,960 Pixels) • Global Shutter Photodiode Pixels; Simultaneous Integration and • • • • • • • • Readout RGB Bayer or Monochrome: NIR Enhanced Performance for Use with Non-visible NIR Illumination Readout Modes: Progressive or Interlaced Shutter Efficiency: >99% Simple Two-wire Serial Interface Real-Time Exposure Context Switching − Dual Register Set Register Lock Capability Window Size: User Programmable to any Smaller Format (QVGA, CIF, QCIF). Data Rate can be Maintained Independent of Window Size Binning: 2 x 2 and 4 x 4 of the Full Resolution © Semiconductor Components Industries, LLC, 2008 January, 2017 − Rev. 7 1 • (Option to Operate in 12-bit to 10-bit Companding Mode) Automatic Controls: Auto Exposure Control (AEC) and Auto Gain Control (AGC); Variable Regional and Variable Weight AEC/AGC Support for Four Unique Serial Control Register IDs to Control Multiple Imagers on the Same Bus Data Output Formats: • Single Sensor Mode: 10-bit Parallel/stand-alone 8-bit or 10-bit Serial LVDS • Stereo Sensor Mode: Interspersed 8-bit Serial LVDS High Dynamic Range (HDR) Mode Applications • • • • • • • Security High Dynamic Range Imaging Unattended Surveillance Stereo Vision Video as Input Machine Vision Automation Publication Order Number: MT9V034/D MT9V034 Table 1. KEY PERFORMANCE PARAMETERS Parameter Value Optical Format 1/3-inch Active Imager Size 4.51 mm (H) x 2.88 mm (V) 5.35 mm diagonal Active Pixels 752 H x 480 V Pixel Size 6.0 x 6.0 μm Color Filter Array Monochrome or color RGB Bayer Shutter Type Global Shutter Maximum Data Rate Master Clock 27 Mp/s 27 MHz Full Resolution 752 x 480 Frame Rate 60 fps (at full resolution) ADC Resolution 10-bit column-parallel Responsivity 4.8 V/lux-sec (550 nm) Dynamic Range >55 dB linear; >100 dB in HDR mode Supply Voltage 3.3 V ± 0.3 V (all supplies) Power Consumption