MUR130RLG

MUR120 Series SWITCHMODE Power Rectifiers MUR105, MUR110, MUR115, MUR120, MUR130, MUR140, MUR160 The MUR120 series of SWITCHMODE power rectifiers are designed for use in switching power supplies, inverters and as free wheeling diodes. Features • • • • • • • • • http://onsemi.com ULTRAFAST RECTIFIERS 1.0 AMPERE, 50 − 600 VOLTS Ultrafast 25, 50 and 75 Nanosecond Recovery Times 175°C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Reverse Voltage to 600 V Shipped in Plastic Bags; 1,000 per Bag Available Tape and Reel; 5,000 per Reel, by adding a “RL’’ Suffix to the Part Number These are Pb−Free Devices* Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 0.4 Gram (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Polarity: Cathode Indicated by Polarity Band AXIAL LEAD CASE 59 STYLE 1 MARKING DIAGRAM A MUR 1xx YYWW G G A = Assembly Location MUR1xx = Specific Device Code Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2013 May, 2013 − Rev. 12 1 Publication Order Number: MUR120/D MUR120 Series MAXIMUM RATINGS MUR Symbol 105 110 115 120 130 140 160 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 300 400 600 V Average Rectified Forward Current (Square Wave Mounting Method #3 Per Note 2) IF(AV) 1.0 @ TA = 120°C A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 35 A TJ, Tstg *65 to +175 °C Rating Operating Junction Temperature and Storage Temperature 1.0 @ TA = 130°C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Characteristic Maximum Thermal Resistance, Junction−to−Ambient Symbol Max Unit RqJA Note 2 °C/W Symbol Value Unit ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 1) (iF = 1.0 Amp, TJ = 150°C) (iF = 1.0 Amp, TJ = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 150°C) (Rated DC Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A) trr Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V) Typical Peak Reverse Recovery Current (IF = 1.0 A, di/dt = 50 A/ms) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. http://onsemi.com 2 0.710 0.875 1.05 1.25 50 2.0 150 5.0 35 25 75 50 tfr 25 50 IRM 0.85 V mA ns ns A MUR120 Series MUR105, MUR110, MUR115, MUR120 100 10 TJ = 175°C IR, REVERSE CURRENT (m A) 7.0 5.0 3.0 100°C 25°C 1.0 100°C 0.1 0.01 25°C 1.0 0.001 0.7 0 20 40 0.5 60 100 80 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current* 0.3 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 0.2 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i , INSTANTANEOUS FORWARD CURRENT (AMPS) F TJ = 175°C 2.0 10 0.1 0.07 0.05 0.03 0.02 0.01 0.3 0.4 0.5 0.6 0.7 0.8 1.0 0.9 1.1 1.2 1.3 5.0 4.0 RATED VR RqJA = 50°C/W 3.0 dc 2.0 SQUARE WAVE 1.0 0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 50 Figure 1. Typical Forward Voltage 100 150 200 250 TA, AMBIENT TEMPERATURE (°C) 50 5.0 TJ = 175°C 4.0 I (CAPACITIVELOAD) PK + 20 I AV TJ = 25°C 10 30 C, CAPACITANCE (pF) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) Figure 3. Current Derating (Mounting Method #3 Per Note 1) 5.0 3.0 2.0 dc 20 10 1.0 7.0 SQUARE WAVE 5.0 0 0 0.5 1.0 1.5 2.0 2.5 0 10 20 30 40 IF(AV), AVERAGE FORWARD CURRENT (AMPS) VR, REVERSE VOLTAGE (VOLTS) Figure 4. Power Dissipation Figure 5. Typical Capacitance http://onsemi.com 3 50 MUR120 Series MUR130, MUR140, MUR160 400 10 100 IR, REVERSE CURRENT (m A) 7.0 5.0 3.0 100°C 25°C 10 4.0 100°C 1.0 0.4 0.1 25°C 0.04 1.0 0.01 0.004 0.7 0 100 200 0.5 300 400 500 600 700 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current* 0.3 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 0.2 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i , INSTANTANEOUS FORWARD CURRENT (AMPS) F TJ = 175°C 2.0 TJ = 175°C 40 0.1 0.07 0.05 0.03 0.02 0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 5.0 4.0 RATED VR RqJA = 50°C/W 3.0 2.0 dc 1.0 SQUARE WAVE 0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 50 Figure 6. Typical Forward Voltage 100 150 200 250 TA, AMBIENT TEMPERATURE (°C) 20 5.0 TJ = 175°C 4.0 TJ = 25°C 5.0 3.0 (CAPACITIVE LOAD) I I 2.0 C, CAPACITANCE (pF) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) Figure 8. Current Derating (Mounting Method #3 Per Note 2) 10 PK + 20 dc AV SQUARE WAVE 1.0 10 7.0 5.0 3.0 2.0 0 0 0.5 1.0 1.5 2.0 2.5 0 10 20 30 40 IF(AV), AVERAGE FORWARD CURRENT (AMPS) VR, REVERSE VOLTAGE (VOLTS) Figure 9. Power Dissipation Figure 10. Typical Capacitance http://onsemi.com 4 50 MUR120 Series NOTE 2. — AMBIENT MOUNTING DATA Data shown for thermal resistance, junction−to−ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA Lead Length, L (in.) 1/4 1/2 1/8 52 65 72 67 80 87 Units °C/W °C/W 50 °C/W 3 MOUNTING METHOD 1 L L ÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉ MOUNTING METHOD 2 ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ L L Vector Pin Mounting ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ MOUNTING METHOD 3 L = 3/8 ″ Board Ground Plane P.C. Board with 1−1/2 ″ X 1−1/2 ″ Copper Surface http://onsemi.com 5 MUR120 Series ORDERING INFORMATION Marking Package Shipping† MUR105 MUR105 Axial Lead* 1000 Units / Bag MUR105G MUR105 Axial Lead* 1000 Units / Bag MUR105RL MUR105 Axial Lead* 5000 Units / Tape & Reel MUR105RLG MUR105 Axial Lead* 5000 Units / Tape & Reel MUR110 MUR110 Axial Lead* 1000 Units / Bag MUR110G MUR110 Axial Lead* 1000 Units / Bag MUR110RL MUR110 Axial Lead* 5000 Units / Tape & Reel MUR110RLG MUR110 Axial Lead* 5000 Units / Tape & Reel MUR115 MUR115 Axial Lead* 1000 Units / Bag MUR115G MUR115 Axial Lead* 1000 Units / Bag MUR115RL MUR115 Axial Lead* 5000 Units / Tape & Reel MUR115RLG MUR115 Axial Lead* 5000 Units / Tape & Reel MUR120 MUR120 Axial Lead* 1000 Units / Bag MUR120G MUR120 Axial Lead* 1000 Units / Bag MUR120RL MUR120 Axial Lead* 5000 Units / Tape & Reel MUR120RLG MUR120 Axial Lead* 5000 Units / Tape & Reel MUR130 MUR130 Axial Lead* 1000 Units / Bag MUR130G MUR130 Axial Lead* 1000 Units / Bag MUR130RL MUR130 Axial Lead* 5000 Units / Tape & Reel MUR130RLG MUR130 Axial Lead* 5000 Units / Tape & Reel MUR140 MUR140 Axial Lead* 1000 Units / Bag MUR140G MUR140 Axial Lead* 1000 Units / Bag MUR140RL MUR140 Axial Lead* 5000 Units / Tape & Reel MUR140RLG MUR140 Axial Lead* 5000 Units / Tape & Reel MUR160 MUR160 Axial Lead* 1000 Units / Bag MUR160G MUR160 Axial Lead* 1000 Units / Bag MUR160RL MUR160 Axial Lead* 5000 Units / Tape & Reel MUR160RLG MUR160 Axial Lead* 5000 Units / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free. http://onsemi.com 6 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS AXIAL LEAD CASE 59−10 ISSUE U DATE 15 FEB 2005 B K STYLE 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. D STYLE 2 F A SCALE 1:1 POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) F K DIM A B D F K INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 −−− 0.050 1.000 −−− MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 −−− 1.27 25.40 −−− GENERIC MARKING DIAGRAM* STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE STYLE 2: NO POLARITY A xxx xxx YYWW STYLE 1 xxx A YY WW A xxx xxx YYWW STYLE 2 = Specific Device Code = Assembly Location = Year = Work Week *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. DOCUMENT NUMBER: DESCRIPTION: 98ASB42045B AXIAL LEAD Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative