MUR620CTG

MUR620CTG Switch Mode Power Rectifier These state−of−the−art Switch Mode power rectifiers are designed for use in switching power supplies, inverters and as free wheeling diodes. www.onsemi.com Features • • • • ULTRAFAST RECTIFIER 6.0 AMPERES, 200 VOLTS Ultrafast 35 Nanosecond Recovery Time 175°C Operating Junction Temperature Popular TO−220 Package These are Pb−Free Devices* 1 2, 4 Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal 3 4 Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AB CASE 221A MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 V Average Rectified Forward Voltage (Rated VR, TC = 130°C) Per Diode Total Device IF(AV) Peak Repetitive Forward Current per Diode Leg (Rated VR, Square Wave, 20 kHz, TC = 130°C) IFRM Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 75 A TJ, Tstg −65 to +175 °C Operating Junction and Storage Temperature Range 1 2 3 MARKING DIAGRAM A 3.0 6.0 6.0 A Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. AY WW U620G AKA A Y WW U620 G AKA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION Device MUR620CTG Package Shipping TO−220 (Pb−Free) 50 Units/Rail *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2015 January, 2015 − Rev. 5 1 Publication Order Number: MUR620CT/D MUR620CTG THERMAL CHARACTERISTICS (Per Diode Leg) Rating Symbol Typical Maximum Unit RqJC 5.0−6.0 7.0 °C/W Symbol Typical Maximum Unit 0.80 0.94 0.895 0.975 2.0−10 0.01−3.0 250 5.0 20−30 35 Thermal Resistance, Junction−to−Case ELECTRICAL CHARACTERISTICS (Per Diode Leg) Rating Instantaneous Forward Voltage (Note 1) (iF = 3.0 A, TC = 150°C) (iF = 3.0 A, TC = 25°C) vF Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 150°C) (Rated DC Voltage, TC = 25°C) iR Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) trr V mA ns i F , INSTANTANEOUS FORWARD CURRENT (AMPS) Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 TJ = 175°C 0.3 0.2 0.1 0.2 25°C 150°C 100°C 0.4 0.6 0.8 1.0 vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 1.2 Figure 1. Typical Forward Voltage I R, REVERSE CURRENT (A) μ 100 40 20 10 TJ = 175°C 4.0 2.0 1.0 150°C 0.4 0.2 0.1 100°C 0.04 0.02 0.01 0.004 0.002 0.001 25°C 0 20 40 60 80 100 120 140 160 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current www.onsemi.com 2 180 200 I F(AV), AVERAGE FORWARD CURRENT (AMPS) MUR620CTG 8.0 Rated VR Applied 7.0 6.0 DC 5.0 4.0 SQUARE WAVE 3.0 2.0 1.0 0 100 120 180 140 160 TC, CASE TEMPERATURE (°C) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Total Device Current Derating, Case 7.0 RqJA = 16°C/W with a typical TO-220 heat sink 6.0 dc 5.0 SQUARE WAVE 4.0 dc 3.0 2.0 SQUARE WAVE RqJA = 60°C/W (free air, no heat sink) 1.0 0 0 40 20 60 80 100 120 140 160 180 200 TA, AMBIENT TEMPERATURE (°C) PF(AV), AVERAGE POWER DISSIPATION (WATTS) Figure 4. Total Device Current Derating, Ambient 8.0 7.0 SQUARE WAVE DC 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1 2 3 4 5 6 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation www.onsemi.com 3 7 8 onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative