MURB1620CTRT4

MUR1620CTR, MURB1620CTR Preferred Device SWITCHMODE] Power Rectifier These state−of−the−art devices are designed for use in negative switching power supplies, inverters and as free wheeling diodes. Also, used in conjunction with common cathode dual Ultrafast Rectifiers, makes a single phase full−wave bridge. Features http://onsemi.com • • • • • • • • • Common Anode Dual Rectifier (8.0 A per Leg or 16 A per Package) Ultrafast 35 Nanosecond Reverse Recovery Times Exhibits Soft Recovery Characteristics High Temperature Glass Passivated Junction Low Leakage Specified @ 150°C Case Temperature Current Derating @ Both Case and Ambient Temperatures Epoxy Meets UL 94 V−0 @ 0.125 in Complement to MUR1620CT and MURB1620CT Common Cathode Device Pb−Free Packages are Available ULTRAFAST RECTIFIER 16 AMPERES, 200 VOLTS 1 2, 4 3 MARKING DIAGRAMS Mechanical Characteristics: • Case: Epoxy, Molded • Weight: MUR1620CTR: 1.9 Grams (Approximately) • • MURB1620CTR: 1.7 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AB CASE 221A STYLE 7 AYWW U1620RG KAK MAXIMUM RATINGS (Per Leg) Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Voltage Per Leg (Rated VR, TC = 160°C) Per Total Device Peak Repetitive Surge Current (Rated VR, Square Wave, 20 kHz, TC = 140°C) Per Diode Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Operating Junction and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) 8.0 16 IFM 16 A U1620R = Device Code KAK = Diode Polarity A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package Value 200 Unit V 1 A 3 4 D2PAK CASE 418B STYLE 5 AYWW U1620RG KAK IFSM 100 A TJ, Tstg −65 to +175 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Preferred devices are recommended choices for future use and best overall value. © Semiconductor Components Industries, LLC, 2005 1 September, 2005 − Rev. 3 Publication Order Number: MUR1620CTR/D MUR1620CTR, MURB1620CTR THERMAL CHARACTERISTICS (Per Leg) Rating Thermal Resistance, Junction−to−Case Symbol RqJC Value 2.0 Unit °C/W ELECTRICAL CHARACTERISTICS (Per Leg) Rating Maximum Instantaneous Forward Voltage (Note 1) (iF = 8.0 Amps, TC = 25°C) (iF = 8.0 Amps, TC = 150°C) Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TC = 25°C) (Rated dc Voltage, TC = 150°C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/ms) (IF = 0.5 Amp, di/dt = 100 Amps/ms) 1. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%. 100 70 50 1000 500 200 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 Symbol vF 1.2 1.1 iR 5.0 500 trr 85 35 ns mA Value Unit V IR, REVERSE CURRENT (mA) TJ = 175°C 150°C 100°C * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 25°C 0 20 40 60 80 100 120 140 160 180 200 30 iF, INSTANTANEOUS FORWARD CURRENT (AMPS) 20 10 7.0 5.0 150°C 3.0 2.0 25°C 1.0 0.7 0.5 100°C TJ = 175°C VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current* (Per Leg) IF(AV), AVERAGE FORWARD CURRENT (AMPS) 16 14 12 10 8.0 6.0 4.0 2.0 0 140 150 160 170 180 SQUARE WAVE dc RATED VR APPLIED RqJC = 2°C/W 0.3 0.2 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (°C) Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Current Derating, Case (Per Leg) http://onsemi.com 2 MUR1620CTR, MURB1620CTR PF(AV), AVERAGE POWER DISSIPATION (WATTS) 16 14 12 10 8.0 6.0 4.0 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 IF(AV), AVERAGE FORWARD CURRENT (AMPS) SQUARE WAVE dc TJ = 175°C Figure 4. Power Dissipation (Per Leg) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 D = 0.5 0.5 0.1 0.05 0.01 0.05 SINGLE PULSE 0.02 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 t, TIME (ms) 5.0 10 20 50 100 200 500 1000 P(pk) t1 t2 DUTY CYCLE, D = t1/t2 ZqJC(t) = r(t) RqJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) − TC = P(pk) ZqJC(t) 0.2 0.1 Figure 5. Thermal Response 1000 900 800 C, CAPACITANCE (pF) 700 600 500 400 300 200 100 0 0.1 0.2 0.3 0.5 0.7 1.0 0.2 0.3 0.5 0.7 10 VR, REVERSE VOLTAGE (VOLTS) 20 30 50 70 100 Figure 6. Typical Capacitance (Per Leg) http://onsemi.com 3 MUR1620CTR, MURB1620CTR ORDERING INFORMATION Device MUR1620CTR MUR1620CTRG MURB1620CTR MURB1620CTRG MURB1620CTRT4 MURB1620CTRT4G Package TO−220 TO−220 (Pb−Free) D2PAK−3 D2PAK−3 (Pb−Free) D2PAK−3 D2PAK−3 (Pb−Free) Shipping † 50 Units / Rail 50 Units / Rail 50 Units / Rail 50 Units / Rail 800 / Tape & Reel 800 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 4 MUR1620CTR, MURB1620CTR PACKAGE DIMENSIONS TO−220 THREE−LEAD TO−220AB CASE 221A−09 ISSUE AA −T− B 4 SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 −−− −−− 0.080 CATHODE ANODE CATHODE ANODE MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 −−− −−− 2.04 F T S C Q 123 A U K H Z L V G D N R J STYLE 7: PIN 1. 2. 3. 4. http://onsemi.com 5 MUR1620CTR, MURB1620CTR PACKAGE DIMENSIONS D2PAK−3 CASE 418B−04 ISSUE J C E −B− 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. DIM A B C D E F G H J K L M N P R S V INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 V W A 1 2 3 S −T− SEATING PLANE K G D 3 PL 0.13 (0.005) H M W J TB M STYLE 5: PIN 1. CATHODE 2. ANODE 3. CATHODE 4. ANODE VARIABLE CONFIGURATION ZONE L M R N U L P L M M F VIEW W−W 1 F VIEW W−W 2 F VIEW W−W 3 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan : ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 MUR1620CTR/D