MURH860CT
Preferred Device
MEGAHERTZt Power Rectifier
These state-of-the-art are MEGAHERTZ power rectifiers are designed for use in switching power supplies, inverters and as free wheeling diodes.
Features http://onsemi.com
• • • • • • • • •
Ultrafast 35 Nanosecond Recovery Times 175°C Operating Junction Temperature Popular TO-220 Package Epoxy Meets UL 94 V−0 @ 0.125 in High Temperature Glass Passivated Junction High Voltage Capability to 600 V Low Leakage Specified @ 150°C Case Temperature Current Derating @ Both Case and Ambient Temperatures Pb−Free Package is Available*
ULTRAFAST RECTIFIER 8.0 AMPERES, 600 VOLTS
1 2, 4 3 4
Mechanical Characteristics:
• Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal •
Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
1
TO−220AB CASE 221A PLASTIC 2 3
MARKING DIAGRAM
MAXIMUM RATINGS (Per Leg)
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR, TC = 120°C) Total Device Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 120°C) Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Operating Junction and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) IFM IFSM Value 600 Unit V AY WW UH860G AKA
4.0 8.0 16 100
A A A A Y WW UH860 G AKA
TJ, Tstg
−65 to +175
°C
THERMAL CHARACTERISTICS (Per Leg)
Rating Max. Thermal Resistance, Junction−to−Case Symbol RqJC Value 3.0 Unit °C/W
= Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity
ORDERING INFORMATION
Device MURH860CT MURH860CTG Package TO−220 TO−220 (Pb−Free) Shipping 50 Units/Rail 50 Units/Rail
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
Preferred devices are recommended choices for future use and best overall value.
© Semiconductor Components Industries, LLC, 2008
June, 2008 − Rev. 4
1
Publication Order Number: MURH860CT/D
MURH860CT
ELECTRICAL CHARACTERISTICS (Per Leg)
Rating Maximum Instantaneous Forward Voltage (Note 1) (iF = 4.0 A, TC = 150°C) (iF = 4.0 A, TC = 25°C) Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 150°C) (Rated DC Voltage, TC = 25°C) Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0% 100 I R , REVERSE LEAKAGE CURRENT ( μA) TJ = 150°C 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 Symbol vF Value 2.5 2.8 500 10 35 Unit V
iR
mA
trr
ns
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
50 20 10 7 5 3 2 85°C
150°C
25°C
100°C 25°C
1 0.7 0.5 0.3 0.2 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 v F , INSTANTANEOUS VOLTAGE (VOLTS) 4.5 5
0
50 100
200 300 400 500 VR, REVERSE VOLTAGE (VOLTS)
600
Figure 1. Typical Forward Voltage, Per Leg
Figure 2. Typical Reverse Leakage Current, Per Leg
PF(AV), AVERAGE POWER DISSIPATION (WATTS)
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
40 36 32 28 24 20 16 12 8 4 0 1 2 3 4 5 6 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 7 SQUARE WAVE DC TJ = 150°C
10 9 8 7 6 5 4 3 2 1 0 40 60 80 100 120 140 TC, CASE TEMPERATURE (°C) 160 180 SQUARE DC RATED VOLTAGE APPLIED RqJC = 3°C/W
Figure 3. Typical Forward Dissipation, Per Leg
Figure 4. Typical Current Derating, Case, Per Leg
http://onsemi.com
2
MURH860CT
32 Trr, REVERSE RECOVERY TIME (ns) 28 24 20 Qrr 16 12 8 4 0 0 1 2 3 4 5 6 7 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 8 Vr = 30 V di/dt = 50 A/ms 16 12 8 4 0 Trr 32 28 24 20 Qrr , RECOVERED STORED CHARGE (nC)
Figure 5. Typical Recovery Characteristics
140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0.1
C, CAPACITANCE (pF)
1 10 VR, REVERSE VOLTAGE (VOLTS)
100
Figure 6. Typical Capacitance, Per Leg
http://onsemi.com
3
MURH860CT
PACKAGE DIMENSIONS
TO−220 CASE 221A−09 ISSUE AF
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.095 0.105 0.110 0.155 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 4.09 2.42 2.66 2.80 3.93 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04
−T− B
4
SEATING PLANE
F
T
C S
Q
123
A U K
H Z L V G D N
R J
MEGAHERTZ is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
4
MURH860CT/D
