MURP20020CT_06

MURP20020CT, MURP20040CT Preferred Devices POWERTAPt II Ultrafast SWITCHMODEt Power Rectifiers These state−of−the−art POWERTAP II Ultrafast SWITCHMODE power rectifiers are designed for use in switching power supplies, inverters, and as free wheeling diodes. Features http://onsemi.com • • • • • • • • • • • Dual Diode Construction Low Leakage Current Low Forward Voltage 175°C Operating Junction Temperature Labor Saving POWERTAP Package Pb−Free Packages are Available* Case: Epoxy, Molded with Metal Heatsink Base Weight: 80 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant Top Terminal Torque: 25 − 40 lb−in Max Base Plate Torques: See Procedure Given in the Package Outline Section Rating Symbol VRRM VRWM VR IF(AV) Value Unit V 300 400 200 100 200 A ULTRAFAST RECTIFIERS 200 AMPERES, 200−400 VOLTS 1 2 3 Mechanical Characteristics: 1 2 3 POWERTAP II CASE 357C PLASTIC MAXIMUM RATINGS Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage MURP20020CT MURP20040CT Average Rectified Forward Current @ TL = 150°C − Per Device @ TL = 125°C − Per Leg Peak Repetitive Surge Current Per Leg (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Nonrepetitive Peak Surge Current Per Leg (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature Storage Temperature MARKING DIAGRAM AYYWWG UP200x0 IFRM A IFSM 800 A A YY WW G UP200x0 = = = = = Assembly Location Year Work Week Pb−Free Package Device Code x = 2 or 4 TJ Tstg Symbol RqJC −55 to +175 −55 to +150 °C °C ORDERING INFORMATION Device MURP20020CT Package POWERTAP II Shipping 25 Units/Tray 25 Units/Tray 25 Units/Tray 25 Units/Tray THERMAL CHARACTERISTICS Rating Thermal Resistance, Junction−to−Lead Max 0.45 Unit °C/W MURP20020CTG POWERTAP II (Pb−Free) MURP20040CT POWERTAP II Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. MURP20040CTG POWERTAP II (Pb−Free) Preferred devices are recommended choices for future use and best overall value. © Semiconductor Components Industries, LLC, 2006 September, 2006 − Rev. 6 1 Publication Order Number: MURP20020CT/D MURP20020CT, MURP20040CT ELECTRICAL CHARACTERISTICS (Per Leg) Rating Instantaneous Forward Voltage (Note 1) (iF = 100 A, TC = +25°C) (iF = 200 A, TC = 25°C) (iF = 100 A, TC = 125°C) Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 125°C) (Rated DC Voltage, TC = 25°C) Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. Symbol vF MURP20020CT 1.00 1.10 0.95 1000 150 50 MURP20040CT 1.30 1.75 1.15 500 50 75 Unit V iR mA trr ns http://onsemi.com 2 MURP20020CT, MURP20040CT PACKAGE DIMENSIONS POWERTAP II CASE 357C−03 ISSUE E − A− R G − B− W 0.25 (0.010) N M TA M B M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. TERMINAL PENETRATION: 5.97 (0.235) MAXIMUM. DIM A B C E F G H N Q R U V W INCHES MIN MAX 3.450 3.635 0.700 0.810 0.615 0.640 0.120 0.130 0.435 0.445 1.370 1.380 0.007 0.030 1/4−20UNC−2B 0.270 0.285 3.150 BSC 0.600 0.630 0.330 0.375 0.170 0.190 MILLIMETERS MIN MAX 87.63 92.33 17.78 20.57 15.63 16.26 3.05 3.30 11.05 11.30 34.80 35.05 0.18 0.76 1/4−20UNC−2B 6.86 7.23 80.01 BSC 15.24 16.00 8.39 9.52 4.32 4.82 Q H F 2 PL 0.25 (0.010) M TA M B M C U V E −T− SEATING PLANE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 3 MURP20020CT/D