MURS105T3

MURS120T3G Series, SURS8120T3G Series, NRVUS120VT3G Series Surface Mount Ultrafast Power Rectifiers MURS105T3G, MURS110T3G, MURS115T3G, MURS120T3G, MURS140T3G, MURS160T3G, SURS8105T3G, SURS8110T3G, SURS8115T3G, SURS8120T3G, SURS8140T3G, SURS8160T3G, NRVUS110VT3G, NRVUS120VT3G, NRVUS160VT3G www.onsemi.com ULTRAFAST RECTIFIERS 1.0 AMPERE, 50−600 VOLTS Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. MARKING DIAGRAM Features • • • • • • Small Compact Surface Mountable Package with J−Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (0.71 to 1.05 V Max @ 1.0 A, TJ = 150°C) NRVUS and SURS8 Prefixes for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 95 mg (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead and Mounting Surface Temperature for Soldering Purposes: • • 260°C Max. for 10 Seconds Polarity: Polarity Band Indicates Cathode Lead ESD Rating: ♦ Human Body Model = 3B (> 8 kV) ♦ Machine Model = C (> 400 V) © Semiconductor Components Industries, LLC, 2017 April, 2019 − Rev. 16 SMB CASE 403A AYWW U1x G G A Y WW U1 = = = = Assembly Location* Year Work Week Device Code x = A, B, C, D, G, or J G = Pb−Free Package (Note: Microdot may be in either location) * The Assembly Location code (A) is front side optional. In cases where the Assembly Location is stamped in the package bottom (molding ejecter pin), the front side assembly code may be blank. ORDERING INFORMATION See detailed ordering and shipping information in the table on page 2 of this data sheet. DEVICE MARKING INFORMATION See general marking information in the device marking table on page 2 of this data sheet. 1 Publication Order Number: MURS120T3/D MURS120T3G Series, SURS8120T3G Series, NRVUS120VT3G Series MAXIMUM RATINGS MURS/SURS8/NRVUS Symbol 105T3 110T3 115T3 120T3 140T3 160T3 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 400 600 V Average Rectified Forward Current IF(AV) 1.0 @ TL = 155°C 2.0 @ TL = 145°C 1.0 @ TL = 150°C 2.0 @ TL = 125°C A Non−Repetitive Peak Surge Current, (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 40 35 A Rating Operating Junction Temperature TJ *65 to +175 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS MURS/SURS8/NRVUS Rating Symbol Thermal Resistance Junction−to−Lead (TL = 25°C) 105T3 115T3 110T3 RqJL 120T3 140T3 160T3 Unit °C/W 13 ELECTRICAL CHARACTERISTICS (TA = 25°C, Unless otherwise noted) Maximum Instantaneous Forward Voltage (Note 1) (iF = 1.0 A, TJ = 25°C) (iF = 1.0 A, TJ = 150°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 150°C) iR Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms, VR = 30 V) (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) trr Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/ms, Rec. to 1.0 V) tfr Typical Peak Reverse Recovery Current (IF = 1.0 A, di/dt = 50 A/ms) IRM 0.875 0.71 1.25 1.05 2.0 50 5.0 150 35 25 75 50 25 50 0.75 1.60 V mA ns ns A 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. DEVICE MARKING AND ORDERING INFORMATION Marking Package Shipping† MURS105T3G, SURS8105T3G* U1A SMB (Pb−Free) 2,500 Units / Tape & Reel MURS110T3G, NRVUS110VT3G* SURS8110T3G* U1B SMB (Pb−Free) 2,500 Units / Tape & Reel MURS115T3G, SURS8115T3G* U1C SMB (Pb−Free) 2,500 Units / Tape & Reel MURS120T3G, NRVUS120VT3G* SURS8120T3G* U1D SMB (Pb−Free) 2,500 Units / Tape & Reel MURS140T3G, SURS8140T3G* U1G SMB (Pb−Free) 2,500 Units / Tape & Reel MURS160T3G, NRVUS160VT3G* SURS8160T3G* U1J SMB (Pb−Free) 2,500 Units / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NRVUS and SURS8 Prefixes for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. www.onsemi.com 2 MURS120T3G Series, SURS8120T3G Series, NRVUS120VT3G Series MURS105T3G, MURS110T3G, MURS115T3G, MURS120T3G, SURS8105T3G, SURS8110T3G, SURS8115T3G, SURS8120T3G, NRVUS110VT3G, NRVUS120VT3G 10 IR, REVERSE CURRENT (m A) 7.0 5.0 3.0 i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 175°C 100°C 2.0 TC = 25°C 1.0 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 TJ = 175°C TJ = 100°C 0.08 0.04 0.02 0.008 0.004 0.002 0.7 TJ = 25°C 0 20 40 0.5 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current* *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. 0.3 0.2 50 0.1 45 0.07 NOTE: TYPICAL CAPACITANCE AT 0 V = 45 pF C, CAPACITANCE (pF) 40 0.05 0.03 0.02 35 30 25 20 15 10 0.01 5.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 10 20 Figure 1. Typical Forward Voltage 30 40 50 60 70 80 90 100 VR, REVERSE VOLTAGE (VOLTS) 10 RATED VOLTAGE APPLIED RqJC = 13°C/W TJ = 175°C 9.0 8.0 7.0 6.0 5.0 4.0 DC 3.0 2.0 SQUARE WAVE 1.0 0 80 90 100 110 120 130 140 150 160 170 180 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Typical Capacitance 5.0 TJ = 175°C 4.0 5.0 I 10 (CAPACITANCELOAD) PK + 20 I 3.0 AV 2.0 DC SQUARE WAVE 1.0 0 0 0.5 1.0 1.5 2.0 TC, CASE TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Case Figure 5. Power Dissipation www.onsemi.com 3 2.5 MURS120T3G Series, SURS8120T3G Series, NRVUS120VT3G Series MURS140T3G, MURS160T3G, SURS8140T3G, SURS8160T3G, NRVUS160VT3G 10 IR, REVERSE CURRENT (m A) 7.0 175°C 5.0 100°C 3.0 i , INSTANTANEOUS FORWARD CURRENT (AMPS) F TC = 25°C 2.0 1.0 0.7 400 200 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 TJ = 175°C TJ = 100°C TJ = 25°C 0 100 200 0.5 300 400 500 600 700 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current* *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. 0.3 0.2 25 0.1 0.07 NOTE: TYPICAL CAPACITANCE AT 0 V = 24 pF C, CAPACITANCE (pF) 20 0.05 0.03 0.02 15 10 5.0 0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 4.0 8.0 Figure 6. Typical Forward Voltage 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) 10 RATED VOLTAGE APPLIED RqJC = 13°C/W TJ = 175°C 9.0 8.0 7.0 6.0 5.0 4.0 DC 3.0 2.0 SQUARE WAVE 1.0 0 0 20 40 60 80 100 120 140 160 180 200 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 8. Typical Capacitance 5.0 4.0 5.0 10 (CAPACITANCE LOAD) I PK + 20 I SQUARE WAVE AV 3.0 DC TJ = 175°C 2.0 1.0 0 0 0.5 1.0 1.5 2.0 TC, CASE TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Case Figure 10. Power Dissipation www.onsemi.com 4 2.5 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SMB CASE 403A−03 ISSUE J SCALE 1:1 DATE 19 JUL 2012 SCALE 1:1 Polarity Band Non−Polarity Band HE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION b SHALL BE MEASURED WITHIN DIMENSION L1. E b DIM A A1 b c D E HE L L1 D POLARITY INDICATOR OPTIONAL AS NEEDED A L L1 c MIN 1.95 0.05 1.96 0.15 3.30 4.06 5.21 0.76 MILLIMETERS NOM MAX 2.30 2.47 0.10 0.20 2.03 2.20 0.23 0.31 3.56 3.95 4.32 4.60 5.44 5.60 1.02 1.60 0.51 REF MIN 0.077 0.002 0.077 0.006 0.130 0.160 0.205 0.030 INCHES NOM 0.091 0.004 0.080 0.009 0.140 0.170 0.214 0.040 0.020 REF MAX 0.097 0.008 0.087 0.012 0.156 0.181 0.220 0.063 GENERIC MARKING DIAGRAM* A1 SOLDERING FOOTPRINT* 2.261 0.089 AYWW XXXXXG G AYWW XXXXXG G Polarity Band Non−Polarity Band XXXXX = Specific Device Code A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) 2.743 0.108 *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. 2.159 0.085 SCALE 8:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98ASB42669B SMB Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative