NC7ST86L6X

DATA SHEET www.onsemi.com TinyLogic HST 2-Input Exclusive-OR Gate MARKING DIAGRAMS SIP6 CASE 127EB NC7ST86 D6KK XYZ Pin 1 Description The NC7ST86 is a single 2−Input high performance CMOS Exclusive−OR Gate, with TTL−compatible inputs. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation. ESD protection diodes inherently guard both inputs and outputs with respect to the VCC and GND rails. High gain circuitry offers high noise immunity and reduced sensitivity to input edge rate. The TTL−compatible inputs facilitate TTL to NMOS / CMOS interfacing. Device performance is similar to MM74HCT but with 1/2 the output current drive of HC / HCT. SC−74A CASE 318BQ 8S86MG G SOT23−5 CASE 527AH 8S86 M SC−88A CASE 419A−02 T86MG G Features • • • • • • • Space Saving SOT23−5, SC−74A and SC−88A 5−Lead Package Ultra Small MicroPak™ Leadless Package High Speed: tPD < 8 ns Typ, VCC = 5 V, CL = 15 pF Low Quiescent Power: ICC < 1 mA Typ, VCC = 5.5 V Balanced Output Drive: 2 mA IOL, −2 mA IOH TTL−compatible Inputs These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant IEEE / IEC A B =1 D6, 8S86, T86 KK XY Z M = Specific Device Code = 2−Digit Lot Run Traceability Code = 2−Digit Date Code Format = Assembly Plant Code = Date Code* *Date Code orientation and/or position may vary depending upon manufacturing location. Y Figure 1. Logic Symbol ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 4 of this data sheet. © Semiconductor Components Industries, LLC, 2004 June, 2022 − Rev. 4 1 Publication Order Number: NVBL/D NC7ST86 Pin Configurations A 1 5 VCC B 2 GND 3 4 Y 5 NC 4 Y FUNCTION TABLE (Y = A ⊕ B) Pin Name NC B 2 Figure 3. MicroPak (Top Through View) PIN DESCRIPTIONS Y 6 VCC GND 3 Figure 2. SOT23−5, SC−88A and SC−74A (Top View) A, B A 1 Description Output Inputs Input A B Y Output L L L No Connect L H H H L H H H L H = HIGH Logic Level L = LOW Logic Level ABSOLUTE MAXIMUM RATINGS Symbol VCC IIK Parameter Supply Voltage DC Input Diode Current VIN DC Input Voltage IOK DC Output Diode Current Min Max Unit −0.5 6.5 V mA VIN < 0 V − −20 VIN > VCC − +20 −0.5 VCC + 0.5 V VOUT < 0 V − −20 mA VOUT > VCC − +20 −0.5 VCC + 0.5 V VOUT Output Voltage IOUT DC Output Source or Sink Current − ±12.5 mA DC VCC or Ground Current per Supply Pin − ±25 mA ICC or IGND TSTG Storage Temperature −65 +150 °C TJ Junction Temperature − +150 °C TL Lead Temperature (Soldering, 10 Seconds) − +260 °C PD Power Dissipation in Still Air SC−74A / SOT23−5 − 390 mW SC−88A − 332 MicroPak−6 − 812 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. www.onsemi.com 2 NC7ST86 RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit 4.5 5.5 V Input Voltage 0 VCC V Output Voltage 0 VCC V −40 +85 °C VCC Supply Voltage VIN VOUT Conditions TA Operating Temperature tr, tf Input Rise and Fall Time VCC = 5.0 V 0 10 ns/V qJA Thermal Resistance SC−74A / SOT23−5 − 320 °C/W SC−88A − 377 MicroPak−6 − 154 Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 1. Unused inputs must be held HIGH or LOW. They may not float. DC ELECTICAL CHARACTERISTICS TA = +25°C Symbol Parameter VCC (V) Conditions TA = −40 to +85°C Min Typ Max Min Max Unit VIH HIGH Level Input Voltage 4.5 − 5.5 2.0 − − 2.0 − V VIL LOW Level Input Voltage 4.5 − 5.5 − − 0.8 − 0.8 V VOH HIGH Level Output Voltage V VOL LOW Level Output Voltage 4.5 IOH = –20 mA, VIN = VIL, 4.4 4.5 − 4.4 − 4.5 VIH IOH = –2 mA 4.18 4.35 − 4.13 − 4.5 IOL = 20 mA, VIN = VIL, − 0 0.1 − 0.1 4.5 VIH IOL = 2 mA − 0.10 0.26 − 0.33 V IIN Input Leakage Current 5.5 0 ≤ VIN ≤ 5.5 V − − ±0.1 − ±1.0 mA ICC Quiescent Supply Current 5.5 VIN = VCC or GND − − 1.0 − 10.0 mA ICCT ICC per Input 5.5 One Input VIN = 0.5 V or 2.4 V, Other Input VCC or GND − − 2.0 − 2.9 mA AC ELECTRICAL CHARACTERISTICS TA = +25°C Symbol Parameter VCC (V) tPLH, tPHL Propagation Delay (Figure 4, 6) 5.0 4.5 Conditions CL = 15 pF CL = 50 pF 5.5 tTLH, tTHL Output Transition Time (Figure 4, 6) CIN Input Capacitance CPD Power Dissipation Capacitance (Figure 5) TA = −40 to +85°C Min Typ Max Min Max Unit − 4.4 14 − − ns − 7.4 19 − − − 6.6 18 − 22 − 13.1 29 − 33 − 5.6 16 − 20 − 12.5 28 − 32 ns 5.0 CL = 15 pF − 4 10 − − 4.5 CL = 50 pF − 11 25 − 31 5.5 − 10 21 − 26 Open − 2 10 − − pF − 8 − − − pF 5.0 (Note 2) 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current. Current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 5) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICCstatic). www.onsemi.com 3 NC7ST86 AC Loading and Waveforms VCC OUTPUT INPUT CL CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns Figure 4. AC Test Circuit VCC A INPUT Input = AC Waveforms; PRR = Variable; Duty Cycle = 50%. Figure 6. AC Waveforms Figure 5. ICCD Test Circuit ORDERING INFORMATION Top Mark Package Description Shipping† NC7ST86M5X 8S86 SC−74A 3000 / Tape & Reel NC7ST86M5X−L22090 8S86 SOT23−5 3000 / Tape & Reel NC7ST86P5X T86 SC−88A 3000 / Tape & Reel NC7ST86P5X−L22057 T86 SC−88A 3000 / Tape & Reel NC7ST86L6X D6 SIP6, MicroPak 5000 / Tape & Reel NC7ST86L6X−L22175 D6 SIP6, MicroPak 5000 / Tape & Reel Order Number †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. MicroPak is trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. www.onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SIP6 1.45X1.0 CASE 127EB ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13590G SIP6 1.45X1.0 DATE 31 AUG 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC−88A (SC−70−5/SOT−353) CASE 419A−02 ISSUE L SCALE 2:1 A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A−01 OBSOLETE. NEW STANDARD 419A−02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. G 5 4 −B− S 1 2 DATE 17 JAN 2013 DIM A B C D G H J K N S 3 D 5 PL 0.2 (0.008) B M M N INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 J GENERIC MARKING DIAGRAM* C K H XXXMG G SOLDER FOOTPRINT 0.50 0.0197 XXX = Specific Device Code M = Date Code G = Pb−Free Package 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. mm Ǔ ǒinches STYLE 1: PIN 1. BASE 2. EMITTER 3. BASE 4. COLLECTOR 5. COLLECTOR STYLE 2: PIN 1. ANODE 2. EMITTER 3. BASE 4. COLLECTOR 5. CATHODE STYLE 3: PIN 1. ANODE 1 2. N/C 3. ANODE 2 4. CATHODE 2 5. CATHODE 1 STYLE 4: PIN 1. SOURCE 1 2. DRAIN 1/2 3. SOURCE 1 4. GATE 1 5. GATE 2 STYLE 6: PIN 1. EMITTER 2 2. BASE 2 3. EMITTER 1 4. COLLECTOR 5. COLLECTOR 2/BASE 1 STYLE 7: PIN 1. BASE 2. EMITTER 3. BASE 4. COLLECTOR 5. COLLECTOR STYLE 8: PIN 1. CATHODE 2. COLLECTOR 3. N/C 4. BASE 5. EMITTER STYLE 9: PIN 1. ANODE 2. CATHODE 3. ANODE 4. ANODE 5. ANODE DOCUMENT NUMBER: DESCRIPTION: 98ASB42984B STYLE 5: PIN 1. CATHODE 2. COMMON ANODE 3. CATHODE 2 4. CATHODE 3 5. CATHODE 4 Note: Please refer to datasheet for style callout. If style type is not called out in the datasheet refer to the device datasheet pinout or pin assignment. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. SC−88A (SC−70−5/SOT−353) PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOT−23, 5 Lead CASE 527AH ISSUE A DATE 09 JUN 2021 q q q q q q1 q2 GENERIC MARKING DIAGRAM* XXXM XXX = Specific Device Code M = Date Code *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98AON34320E SOT−23, 5 LEAD Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative