NC7SV17L6X

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. TinyLogic ULP-A Buffer with Schmitt-Trigger Input NC7SV17 The NC7SV17 is a single buffer with Schmitt−Trigger Input in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. www.onsemi.com Features • • • • • • • MARKING DIAGRAMS Designed for 0.9 V to 3.6 V VCC Operation 2.0 ns tPD at 3.3 V (Typ) Inputs/Outputs Over−Voltage Tolerant up to 3.6 V IOFF Supports Partial Power Down Protection Source/Sink 24 mA at 3.3 V Available in SC−88A and MicroPak™ Packages These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant NC 1 A NC 5 VCC 1 6 VCC A 2 2 GND 3 GND 4 Y 5 NC 3 4 Y SIP6 1.45X1.0 MicroPak CASE 127EB CCKK XYZ Pin 1 UDFN6 MicroPak2 CASE 517DP CCKK XYZ Pin 1 CC KK XY Z = Specific Device Code = 2−Digit Lot Run Traceability Code = 2−Digit Date Code = Assembly Plant Code MicroPak SC−88A SC−88A CASE 419A−02 Figure 1. Pinout Diagrams (Top Views) 1 A XXXMG G XXX = Specific Devic Code M = Date Code G = Pb−Free Package Y Figure 2. Logic Symbol ORDERING INFORMATION See detailed ordering, marking and shipping information on page 7 of this data sheet. PIN ASSIGNMENT FUNCTION TABLE Pin SC88A MicroPak Input Output 1 N.C. N.C. A Y 2 A A L L 3 GND GND H H 4 Y Y 5 VCC N.C. 6 − VCC N.C. = No Connect © Semiconductor Components Industries, LLC, 2004 May, 2021 − Rev. 3 1 Publication Order Number: NC7SV17/D NC7SV17 MAXIMUM RATINGS Symbol Value Unit VCC DC Supply Voltage −0.5 to +4.3 V VIN DC Input Voltage −0.5 to +4.3 V −0.5 to VCC + 0.5 −0.5 to +4.3 −0.5 to +4.3 V VIN < GND −50 mA VOUT < GND −50 mA VOUT Characteristics DC Output Voltage Active−Mode (High or Low State) Tri−State Mode (Note 1) Power−Down Mode (VCC = 0 V) IIK DC Input Diode Current IOK DC Output Diode Current IOUT DC Output Source/Sink Current ±50 mA DC Supply Current per Supply Pin or Ground Pin ±50 mA ICC or IGND TSTG −65 to +150 °C TL Storage Temperature Range Lead Temperature, 1 mm from Case for 10 Seconds 260 °C TJ Junction Temperature Under Bias +150 °C qJA Thermal Resistance (Note 2) SC−88A MicroPak 377 154 °C/W PD Power Dissipation in Still Air SC−88A MicroPak 332 812 mW Level 1 − MSL Moisture Sensitivity FR Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in − ESD Withstand Voltage (Note 3) Human Body Model Charged Device Model 1500 1000 V ±100 mA VESD ILatchup Latchup Performance (Note 4) Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Applicable to devices with outputs that may be tri−stated. 2. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow per JESD51−7. 3. HBM tested to EIA / JESD22−A114−A. CDM tested to JESD22−C101−A. JEDEC recommends that ESD qualification to EIA/JESD22−A115A (Machine Model) be discontinued. 4. Tested to EIA/JESD78 Class II. www.onsemi.com 2 NC7SV17 RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC Positive DC Supply Voltage VIN DC Input Voltage VOUT TA tr , tf DC Output Voltage Active−Mode (High or Low State) Tri−State Mode (Note 1) Power−Down Mode (VCC = 0 V) Operating Temperature Range Input Transition Rise and Fall Time Min Max Unit 0.9 3.6 V 0 3.6 V 0 0 0 VCC 3.6 3.6 −40 +85 °C 0 No Limit ns/V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. DC ELECTRICAL CHARACTERISTICS TA = 255C Symbol Parameter VP Positive Threshold Voltage VN VH Negative Threshold Voltage Hysteresis Voltage Condition VCC (V) Min Typ 0.9 − 1.1 − 1.4 TA = −405C to +855C Max Min Max Unit 0.62 − − 1.0 − − V − 1.0 − − 1.25 − 1.25 1.65 − 2.3 − − 1.5 − 1.5 − 1.8 − 1.8 2.7 0.9 − − 2.2 − 2.2 − 0.34 − − − 1.1 0.15 − − 0.15 − 1.4 0.2 − − 0.2 − 1.65 0.25 − − 0.25 − 2.3 0.4 − − 0.4 − 2.7 0.6 − − 0.6 − 0.9 − 0.29 − − − 1.1 0.08 − 0.6 0.08 0.6 1.4 0.09 − 0.8 0.09 0.8 1.65 0.15 − 1.0 0.15 1.0 2.3 0.25 − 1.1 0.25 1.1 2.7 0.6 − 1.2 0.6 1.2 www.onsemi.com 3 V V NC7SV17 DC ELECTRICAL CHARACTERISTICS (continued) TA = −405C to +855C TA = 255C Symbol Parameter VOH High−Level Output Voltage Condition Low−Level Output Voltage Input Leakage Current Max Min Max − VCC – 0.1 − − − 1.1 to 1.3 VCC – 0.1 − − VCC – 0.1 − 1.4 to 1.6 VCC – 0.1 − − VCC – 0.1 − 1.65 to 1.95 VCC – 0.2 − − VCC – 0.2 − 2.3 to