NCP3337MNADJGEVB

NCP3337MNADJGEVB: Adjustable Output Voltage LDO Regulator Evaluation Board Evaluation Board Description The demoboard supports the LDO regulator NCP3337 in DFN10 package with adjustable output voltage. The ENABLE function allows turn the device to low consumption mode with quiescent current below 1 µA. The Power Good pin alows output voltage monitoring. The additional CNR capacitor reduces the output noise. Size: 45mm x 30mm x 18mm Features and Applications Features High Accuracy Over Line and Load (±0.9% at 25°C) Ultra-Low Dropout Voltage at Full Load (260 mV typ.) No Minimum Output Current Required for Stability Low Noise (33 _Vrms w/10 nF Cnr and 52 _Vrms w/out Cnr) Low Shutdown Current (< 1 mA) Reverse Bias Protected 2.9 V to 12 V Supply Range Thermal Shutdown Protection Current Limitation Stable with Any Type of Capacitor (including MLCC) Power Good Output Applications PCMCIA Card Cellular Phones Camcorders and Cameras Networking Systems, DSL/Cable Modems Cable Set-Top Box MP3/CD Players DSP Supply Displays and Monitors Evaluation Board Information Evaluation Board Status Compliance NCP3337MNADJGEVB Active Pb-free Short Description Parts Used Action Adjustable Output Voltage LDO Regulator NCP3337MNADJR2G Evaluation Board Technical Documents Type Document Title Document ID/Size Rev Eval Board: BOM NCP3337MNADJGEVB Bill of Materials ROHS Compliant NCP3337MNADJGEVB_BOM_ROHS.PDF - 37.0 1 KB Eval Board: Gerber NCP3337MNADJGEVB Gerber Layout Files (Zip Format) NCP3337MNADJGEVB_GERBER.ZIP - 56.0 KB 0 Eval Board: Schematic NCP3337MNADJGEVB Schematic NCP3337MNADJGEVB_SCHEMATIC.PDF 560.0 KB Eval Board: Test NCP3337MNADJGEVB Test 0 NCP3337MNADJGEVB_TEST_PROCEDURE.PDF 0 Procedure Procedure - 1144.0 KB Privacy Policy | Terms of Use | Site Map | Careers | Contact Us | Terms and Conditions | Mobile Portal | Mobile App Copyright © 1999-2014 ON Semiconductor Follow Us http://www.onsemi.com/PowerSolutions/evalBoard.do?id=NCP3337MNADJGEVB[2/27/2014 2:07:14 PM]