NCP584
Tri-Mode 200 mA CMOS
LDO Regulator with Enable
The NCP584 series of low drop out regulators are designed for
portable battery powered applications which require precise output
voltage accuracy, low quiescent current, and high ripple rejection.
These devices feature an enable function which lowers current
consumption significantly and are offered in the SOT23−5 package.
This series of devices have three modes. Chip Enable (CE mode),
Fast Transient Mode (FT mode), and Low Power Mode (LP mode).
Both the FT and LP mode are utilized via the ECO pin.
http://onsemi.com
MARKING
DIAGRAM
Features
• Tri−mode Operation
• Low Dropout Voltage of 400 mV at 200 mA, Output Voltage = 0.9 V
•
•
•
•
•
•
•
•
•
•
300 mV at 200 mA, Output Voltage = 1.2 V
200 mV at 200 mA, Output Voltage = 1.8 V
Excellent Line Regulation of 0.05%/V (0.10% LP Mode)
Excellent Load Regulation of 10 mV (20 mV FT Mode)
High Output Voltage Accuracy of ±2% (±3% LP mode)
Ultra−Low Iq Current of:
3.5 mA (LP mode, Output Voltage ≤ 1.5 V)
40 mA (FT mode)
Very Low Shutdown Current of 0.1 mA
Excellent Power Supply Rejection Ratio of 75 dB at f = 1.0 kHz
Low Temperature Drift Coefficient on the Output Voltage of
"100 ppm/°C
Fold Back Protection Circuit
Input Voltage up to 6.5 V
These are Pb−Free Devices
5
1
SOT23−5
SN SUFFIX
CASE 1212
5
XXXTT
1
XXX = Specific Device Code
TT = Traceability Information
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
*Additional voltage options may be available between
0.8 V and 3.3 V in 100 mV steps.
Typical Applications
• Portable Equipment
• Hand−Held Instrumentation
• Camcorders and Cameras
ECO
Vin
ECO
Vout
Vin
Vout
+
+
Vref
Vref
Current Limit
CE
Current Limit
GND CE
Figure 1. Simplified Block Diagram for Active Low
© Semiconductor Components Industries, LLC, 2010
February, 2010 − Rev. 14
GND
Figure 2. Simplified Block Diagram for Active High
1
Publication Order Number:
NCP584/D
NCP584
PIN FUNCTION DESCRIPTION
SOT23−5
Pin Name
Description
1
Vin
2
GND
3
CE or CE
4
ECO
Mode alternative pin. (VECO = Vin for FT mode; VECO = GND for LP mode)
5
Vout
Regulated output voltage.
Power supply input voltage.
Power supply ground.
Chip enable pin.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Input Voltage
Vin
6.5
V
Input Voltage (CE or CE Pin)
VCE
−0.3 to Vin +0.3
V
VECO
−0.3 to Vin +0.3
V
Output Voltage
Vout
−0.3 to Vin +0.3
V
Output Current
Iout
250
mA
Power Dissipation
PD
250
mW
ESD Capability, Human Body Model, C = 100 pF, R = 1.5 kW
ESDHBM
1000
V
ESD Capability, Machine Model, C = 200 pF, R = 0 W
ESDMM
150
V
TA
−40 to +85
°C
TJ(max)
125
°C
Tstg
−55 to +150
°C
Input Voltage (ECO Pin)
Operating Ambient Temperature Range
Maximum Junction Temperature
Storage Temperature Range
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2
NCP584
ELECTRICAL CHARACTERISTICS (Vin = Vout + 1.0 V, TA = 25°C, unless otherwise noted.)
Symbol
Min
Typ
Max
Unit
Input Voltage
Vin
1.4
−
6.0
V
Output Voltage (1.0 mA ≤ Iout ≤ 30 mA)
VECO = Vin
VECO = GND
Vout
Vout x 0.980
Vout x 0.970
−
−
Vout x 1.020
Vout x 1.030
−
−
0.05
0.10
0.20
0.30
−
−
20
10
40
40
−
−
−
−
0.40
0.30
0.20
0.10
0.70
0.50
0.30
0.20
−
40
70
−
−
3.5
4.5
6.0
8.0
200
−
−
Characteristic
Line Regulation (Iout = 30 mA, Vout + 0.5 V ≤ Vin ≤ 6.0 V)
FT Mode VECO = Vin
LP Mode VECO = GND
Regline
Load Regulation
FT Mode (1.0 mA ≤ Iout ≤ 200 mA), VECO = Vin
LP Mode (1.0 mA ≤ Iout ≤ 100 mA), VECO = GND
Regload
V
%/V
mV
Dropout Voltage (Iout = 200 mA)
Vout = 0.9 V
1.2 V v Vout v 1.5 V
1.8 V v Vout v 2.5 V
2.6 V v Vout v 3.3 V
VDO
Quiescent Current (Iout = 0 mA)
FT Mode, VECO = Vin
LP Mode, VECO = GND
Vout ≤ 1.5 V
Vout ≥ 1.8 V
Iq
Output Current (Vin − Vout = 0.5 V)
Vin ≥ 1.5 V, Vout = 0.9 V
Iout
Shutdown Current (VCE = Vin)
ISD
−
0.1
1.0
mA
Output Short Circuit Current (Vout = 0 V)
Ilim
−
50
−
mA
Vthenh
Vthenl
1.0
0
−
−
Vin
0.3
Enable Input Threshold Voltage
High
Low
mA
mA
V
Ripple Rejection
(Iout = 30 mA, Vout = 0.9 V, Vin − Vout = 1.0 V)
f = 120 Hz
f = 1.0 kHz
f = 10 kHz
RR
Output Noise Voltage (BW = 10 Hz to 100 kHz
Output Voltage Temperature Coefficient
(Iout = 30 mA, −40°C ≤ TA ≤ 85°C)
V
dB
−
−
−
75
75
65
−
−
−
Vn
−
30
−
mVrms
DVout/DT
−
"100
−
ppm/°C
http://onsemi.com
3
NCP584
1.0
1.0
0.9
0.9
OUTPUT VOLTAGE Vout (V)
OUTPUT VOLTAGE Vout (V)
TYPICAL CHARACTERISTICS
0.8
0.7
Vin = Vout nominal +2.0 V
0.6
Vin = Vout nominal + VDO (max)
0.5
0.4
0.3
Vout = Vout nominal
ECO = H
0.2
0.1
0.8
0.6
100
300
200
Vin = Vout nominal + VDO (max)
0.5
0.4
0.3
Vout = Vout nominal
ECO = L
0.2
0.1
0
Vin = Vout nominal +2.0 V
0.7
400
0
100
1.1
1.1
1.0
1.0
0.9
0.8
0.7
Iout = 1.0 mA
Iout = 30 mA
0.4
Iout = 50 mA
0.3
Vout = 0.9 V
ECO = H
0.2
0.1
0.1
1.1
2.1
3.1
4.1
5.1
0.9
0.8
0.7
0.6
Iout = 1.0 mA
0.5
Iout = 30 mA
0.4
Iout = 50 mA
0.3
Vout = 0.9 V
ECO = L
0.2
0.1
0.1
6.1
1.1
INPUT VOLTAGE Vin (V)
1.7
1.7
OUTPUT VOLTAGE Vout (V)
OUTPUT VOLTAGE Vout (V)
1.9
1.5
1.3
1.1
0.9
Iout = 1.0 mA
Iout = 30 mA
0.3
0.3
Vout = 1.8 V
ECO = H
Iout = 50 mA
1.3
2.3
3.3
4.3
3.1
4.1
5.1
6.1
Figure 6. Output Voltage vs. Input Voltage
1.9
0.5
2.1
INPUT VOLTAGE Vin (V)
Figure 5. Output Voltage vs. Input Voltage
0.7
400
Figure 4. Output Voltage vs. Output Current
OUTPUT VOLTAGE Vout (V)
OUTPUT VOLTAGE Vout (V)
Figure 3. Output Voltage vs. Output Current
0.5
300
OUTPUT CURRENT Iout (mA)
OUTPUT CURRENT Iout (mA)
0.6
200
5.3
1.5
1.3
1.1
0.9
Iout = 30 mA
0.5
0.3
0.3
6.3
Iout = 1.0 mA
0.7
Vout = 1.8 V
ECO = L
Iout = 50 mA
1.3
2.3
3.3
4.3
5.3
INPUT VOLTAGE Vin (V)
INPUT VOLTAGE Vin (V)
Figure 7. Output Voltage vs. Input Voltage
Figure 8. Output Voltage vs. Input Voltage
http://onsemi.com
4
6.3
NCP584
70
8
60
7
QUIESCENT CURRENT, Iq (mA)
QUIESCENT CURRENT, Iq (mA)
TYPICAL CHARACTERISTICS
50
40
30
20
Vout = 0.9 V
ECO = H
10
0
0.1
1.1
2.1
3.1
4.1
5.1
6
5
4
3
2
Vout = 0.9 V
ECO = L
1
0
0.1
6.1
1.1
INPUT VOLTAGE Vin (V)
60
7
SUPPLY CURRENT, Isupply (mA)
QUIESCENT CURRENT, Iq (mA)
8
50
40
30
20
Vout = 1.8 V
ECO = H
1.3
2.3
3.3
4.3
5.3
5
4
3
2
Vout = 1.8 V
ECO = L
1
0
0.3
6.3
1.3
0.92
0.92
OUTPUT VOLTAGE, Vout (V)
OUTPUT VOLTAGE, Vout (V)
0.93
0.91
0.90
0.89
Vout = 0.9 V
ECO = H
0
25
50
3.3
4.3
5.3
6.3
Figure 12. Quiescent Current vs. Input Voltage
0.93
−25
2.3
INPUT VOLTAGE Vin (V)
Figure 11. Quiescent Current vs. Input Voltage
0.87
−50
6.1
5.1
6
INPUT VOLTAGE Vin (V)
0.88
4.1
Figure 10. Quiescent Current vs. Input Voltage
70
0
0.3
3.1
INPUT VOLTAGE Vin (V)
Figure 9. Quiescent Current vs. Input Voltage
10
2.1
75
0.91
0.90
0.89
0.88
0.87
−50
100
TEMPERATURE (°C)
Vout = 0.9 V
ECO = L
−25
0
25
50
75
TEMPERATURE (°C)
Figure 13. Output Voltage vs. Temperature
Figure 14. Output Voltage vs. Temperature
http://onsemi.com
5
100
NCP584
1.23
1.23
1.22
1.22
OUTPUT VOLTAGE, Vout (V)
OUTPUT VOLTAGE, Vout (V)
TYPICAL CHARACTERISTICS
1.21
1.20
1.19
1.18
Vout = 1.2 V
ECO = H
1.17
1.16
−50
−25
0
25
50
75
1.21
1.20
1.19
1.18
1.16
−50
100
0
25
50
75
TEMPERATURE (°C)
Figure 15. Output Voltage vs. Temperature
Figure 16. Output Voltage vs. Temperature
100
DROPOUT VOLTAGE, VDO (V)
0.6
0.5
85°C
25°C
0.4
0.3
−40°C
0.2
0.1
Vout = 0.9 V
ECO = H
0.0
0
25
50
75
100
125
150
175
0.5
25°C
85°C
0.4
−40°C
0.3
0.2
0.1
Vout = 0.9 V
ECO = L
0.0
0
200
25
50
75
100
125
150
175
200
OUTPUT CURRENT Iout (mA)
OUTPUT CURRENT Iout (mA)
Figure 17. Dropout Voltage vs. Output Current
Figure 18. Dropout Voltage vs. Output Current
0.40
0.40
0.35
0.35
0.30
DROPOUT VOLTAGE, VDO (V)
DROPOUT VOLTAGE, VDO (V)
−25
TEMPERATURE (°C)
0.6
DROPOUT VOLTAGE, VDO (V)
Vout = 1.2 V
ECO = L
1.17
85°C
25°C
0.25
0.20
0.15
−40°C
0.10
Vout = 1.2 V
ECO = H
0.05
0.00
0
25
50
75
100
125
150
175
85°C
0.30
25°C
0.25
0.20
−40°C
0.15
0.10
Vout = 1.2 V
ECO = L
0.05
0.00
0
200
25
OUTPUT CURRENT Iout (mA)
50
75
100
125
150
175
200
OUTPUT CURRENT Iout (mA)
Figure 19. Dropout Voltage vs. Output Current
Figure 20. Dropout Voltage vs. Output Current
http://onsemi.com
6
NCP584
TYPICAL CHARACTERISTICS
0.30
0.25
85°C
0.20
25°C
0.15
0.10
−40°C
0.05
0.00
0
Vout = 1.8 V
ECO = H
25
50
75
100
125
150
175
DROPOUT VOLTAGE, VDO (V)
DROPOUT VOLTAGE, VDO (V)
0.30
0.25
85°C
0.20
25°C
0.15
0.10
−40°C
0.05
Vout = 1.8 V
ECO = L
0.00
0
200
25
OUTPUT CURRENT Iout (mA)
RIPPLE REJECTION, RR (dB)
RIPPLE REJECTION, RR (dB)
60
50
Iout = 1.0 mA
40
30
20
10
0
0.1
Vout = 0.9 V
Vin = 1.4 V + 0.2 Vp−p
Cout = 2.2 mF, ECO = H
10
1
100
200
70
Vout = 0.9 V
Vin = 1.4 V + 0.2 Vp−p
Cout = 2.2 mF, ECO = L
60
50
Iout = 1.0 mA
40
Iout = 30 mA
30
20
10
Iout = 50 mA
10
1
100
Figure 23. Ripple Rejection vs. Frequency
Figure 24. Ripple Rejection vs. Frequency
90
RIPPLE REJECTION, RR (dB)
RIPPLE REJECTION, RR (dB)
175
FREQUENCY, f (kHz)
Iout = 50 mA
70
Iout = 30 mA
60
50
40
Iout = 1.0 mA
30
0
0.1
150
FREQUENCY, f (kHz)
80
10
80
0
0.1
90
20
125
90
Iout = 30 mA
70
100
Figure 22. Dropout Voltage vs. Output Current
Iout = 50 mA
80
75
OUTPUT CURRENT Iout (mA)
Figure 21. Dropout Voltage vs. Output Current
90
50
Vout = 1.2 V
Vin = 2.2 V + 0.2 Vp−p
Cout = 2.2 mF, ECO = H
1
10
Vout = 1.2 V
80 V = 2.2 V + 0.2 V
in
p−p
70 Cout = 2.2 mF, ECO = L
60
50
Iout = 30 mA
30
20
10
0
0.1
100
Iout = 1.0 mA
40
Iout = 50 mA
1
10
FREQUENCY, f (kHz)
FREQUENCY, f (kHz)
Figure 25. Ripple Rejection vs. Frequency
Figure 26. Ripple Rejection vs. Frequency
http://onsemi.com
7
100
NCP584
ECO = H, Iout = 30 mA
tr = tf = 5 ms, Cout = 1.0 mF
Vout = Vout nominal
Output Voltage
30
40
50
60
70
80
90
100
ECO = L, Iout = 10 mA
tr = tf = 5 ms, Cout = 1.0 mF
Vout = Vout nominal
Output Voltage
0.0
0.4
0.8
1.2
ECO = H, Iout = 30 mA
tr = tf = 5 ms, Cout = 2.2 mF
Vout = Vout nominal
Output Voltage
10
20
30
40
50
60
OUTPUT VOLTAGE, Vout (0.5 V/div)
Input Voltage
0
70
80
90
100
40
50
60
OUTPUT VOLTAGE, Vout (0.05 V/div)
Output Voltage
30
3.2
3.6
4.0
2.8
3.2
3.6
4.0
ECO = L, Iout = 10 mA
tr = tf = 5 ms, Cout = 2.2 mF
Vout = Vout nominal
Output Voltage
0.0
INPUT VOLTAGE, Vin (1.0 V/div)
OUTPUT VOLTAGE, Vout (0.02 V/div)
ECO = H, Iout = 30 mA
tr = tf = 5 ms, Cout = 4.7 mF
Vout = Vout nominal
20
2.8
0.4
0.8
1.2
1.6
2.0
2.4
TIME, t (ms)
Input Voltage
10
2.4
Input Voltage
TIME, t (ms)
0
2.0
TIME, t (ms)
INPUT VOLTAGE, Vin (1.0 V/div)
OUTPUT VOLTAGE, Vout (0.02 V/div)
TIME, t (ms)
1.6
INPUT VOLTAGE, Vin (1.0 V/div)
20
Input Voltage
70
80
90
100
Input Voltage
ECO = L, Iout = 10 mA
tr = tf = 5 ms, Cout = 4.7 mF
Vout = Vout nominal
0.0
Output Voltage
0.4
0.8
1.2
TIME, t (ms)
1.6
2.0
2.4
TIME, t (ms)
Figure 27. Input Transient Response
http://onsemi.com
8
INPUT VOLTAGE, Vin (1.0 V/div)
10
INPUT VOLTAGE, Vin (1.0 V/div)
Input Voltage
0
OUTPUT VOLTAGE, Vout (0.5 V/div)
INPUT VOLTAGE, Vin (1.0 V/div)
OUTPUT VOLTAGE, Vout (0.02 V/div)
TYPICAL CHARACTERISTICS
2.8
3.2
3.6
4.0
NCP584
TYPICAL CHARACTERISTICS
20
50
ECO = H, Vin = Vout nominal + 1.0 V
Cin = 1.0 mF, Cout = 1.0 mF
Vout = Vout nominal
0
Output Voltage
2
4
6
10
8
12
14
16
18
0
ECO = L, Vin = Vout nominal + 1.0 V
Cin = 1.0 mF, Cout = 1.0 mF
Vout = Vout nominal
Output Voltage
0.0
1.0
2.0
3.0
TIME, t (ms)
4.0
5.0
6.0
7.0
TIME, t (ms)
20
LOAD CURRENT, Iout (mA)
100
Load Current
50
ECO = H, Vin = Vout nominal + 1.0 V
Cin = 1.0 mF, Cout = 2.2 mF
Vout = Vout nominal
0
Output Voltage
−2
0
2
4
6
8
10
12
14
16
OUTPUT VOLTAGE, Vout (0.5 V/div)
OUTPUT VOLTAGE, Vout (0.1 V/div)
150
18
10
Load Current
0
ECO = L, Vin = Vout nominal + 1.0 V
Cin = 1.0 mF, Cout = 2.2 mF
Vout = Vout nominal
Output Voltage
0.0
2.0
1.0
TIME, t (ms)
3.0
4.0
5.0
6.0
50
ECO = H, Vin = Vout nominal + 1.0 V
Cin = 1.0 mF, Cout = 4.7 mF
Vout = Vout nominal
0
Output Voltage
2
4
6
8
10
12
14
16
LOAD CURRENT, Iout (mA)
Load Current
18
OUTPUT VOLTAGE, Vout (0.5 V/div)
OUTPUT VOLTAGE, Vout (0.1 V/div)
20
100
0
7.0
TIME, t (ms)
150
−2
LOAD CURRENT, Iout (mA)
0
Load Current
10
Load Current
0
ECO = L, Vin = Vout nominal + 1.0 V
Cin = 1.0 mF, Cout = 4.7 mF
Vout = Vout nominal
0.0
Output Voltage
1.0
2.0
TIME, t (ms)
3.0
4.0
TIME, t (ms)
Figure 28. Load Transient Response
http://onsemi.com
9
5.0
6.0
7.0
LOAD CURRENT, Iout (mA)
−2
10
LOAD CURRENT, Iout (mA)
Load Current
LOAD CURRENT, Iout (mA)
100
OUTPUT VOLTAGE, Vout (0.5 V/div)
OUTPUT VOLTAGE, Vout (0.1 V/div)
150
NCP584
TYPICAL CHARACTERISTICS
1.8
ECO = H, Vin = 1.8 V,
Cin = 1.0 mF,
Cout = 2.2 mF
1.2
0.6
0.0
2.6
2.4
VCE = 0 V to 1.8 V
OUTPUT VOLTAGE, Vout (V)
CE INPUT VOLTAGE, VCE (V)
CE INPUT VOLTAGE, VCE (V)
VCE = 0 V to 1.8 V
Iout = 200 mA
2.1
1.8
1.6
1.2
1.1
0.6
0.6
0.0
2.1
ECO = L, Vin = 1.8 V,
Cin = 1.0 mF,
Cout = 2.2 mF
Iout = 200 mA
0.1
0
10
20
30
40
50
60
70
OUTPUT VOLTAGE, Vout (V)
2.6
2.4
1.6
1.1
0.6
0.1
0
TIME, t (ms)
100 200 300 400 500 600 700
TIME, t (ms)
Figure 29. Turn−On/Off Speed with CE Pin (Vout = 0.9 V)
2.4
1.7
1.6
1.2
0.8
Iout = 200 mA
0.7
0.0
0.2
ECO = H, Vin = 2.5 V,
Cin = 1.0 mF,
Cout = 2.2 mF
0
10
20
30
40
50
3.2
VCE = 0 V to 2.5 V
OUTPUT VOLTAGE, Vout (V)
CE INPUT VOLTAGE, VCE (V)
CE INPUT VOLTAGE, VCE (V)
VCE = 0 V to 2.5 V
2.4
1.7
1.6
1.2
0.8
Iout = 200 mA
0.0
70
ECO = L, Vin = 2.5 V,
Cin = 1.0 mF,
Cout = 2.2 mF
0
TIME, t (ms)
Figure 30. Turn−On/Off Speed with CE Pin (Vout = 1.2 V)
10
−0.3
100 200 300 400 500 600 700
TIME, t (ms)
http://onsemi.com
0.7
0.2
−0.3
60
2.2
OUTPUT VOLTAGE, Vout (V)
2.2
3.2
NCP584
Iout = 0 mA
0.91
0.90
0.89
Iout = 1 mA
0.91
0.90
0.89
Iout = 10 mA
Iout = 50 mA
0.90
0.89
0.88
0.90
0.89
0.88
Iout = 100 mA
0.91
0.90
0.89
Iout = 200 mA
0.0
3.0
2.0
1.0
0.0
VECO−0 V to 1.3 V
ECO INPUT VOLTAGE, ECO−IN (V)
OUTPUT VOLTAGE, Vout (V)
0.95
0.94
0.93
0.92
0.91
0.90
0.89
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
TIME, t (ms)
Figure 31. Output Voltage at Mode Alternative Point
(Cin = 1.0 mF, Cout = 2.2 mF, 8.0 V, Vout = 0.9 V)
http://onsemi.com
11
NCP584
APPLICATION INFORMATION
Input Decoupling
value of this capacitor, output might be unstable. For a
ceramic type capacitor it is recommended connection
about 1 W resistor in series for the stability of output
voltage. The relation between Output Current of regulator
and ESR of an output capacitor is shown in Figures 32 to
34. Those charts show minimal value of ESR for stable
output voltage in Fast Transient mode. The minimal ESR
of an output ceramic capacitor in Low Power mode is
40 mW for all output voltages. For PCB layout
considerations, place the output capacitor close to the
output pin and keep the leads short as possible.
A 1.0 mF tantalum capacitor is the recommended value
to be connected between Vin and GND. For PCB layout
considerations, the traces of Vin and GND should be
sufficiently wide in order to minimize noise and prevent
unstable operation.
Output Decoupling
It is recommended to use a 2.2 mF or higher tantalum
capacitor on the Vout pin. For better performance, select a
tantalum capacitor with low Equivalent Series Resistance
(ESR). If you use a tantalum type capacitor with high ESR
450
400
350
200
Cout = 1 mF
250
200
Cout = 2.2 mF
150
Cout = 1 mF
150
100
100
Cout = 2.2 mF
50
50
20
40
60
80
0
100 120 140 160 180 200
0
20
40
60
80
100 120 140 160 180 200
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 32. Minimal ESR of Output Ceramic
Capacitor vs. Output Current
Figure 33. Minimal ESR of Output Ceramic
Capacitor vs. Output Current
45
Vout = 3.3 V
Vin = 5 V
FT Mode
TA = 25°C
40
35
Cout = 1 mF
30
ESR (mW)
0
0
Vout = 1.2 V
Vin = 3 V
FT Mode
TA = 25°C
250
ESR (mW)
300
ESR (mW)
300
Vout = 0.9 V
Vin = 3 V
FT Mode
TA = 25°C
25
20
Cout = 2.2 mF
15
10
5
0
0
25
50
75
100
125
150
175
OUTPUT CURRENT (mA)
Figure 34. Minimal ESR of Output Ceramic
Capacitor vs. Output Current
http://onsemi.com
12
200
NCP584
ORDERING INFORMATION
Nominal
Output Voltage
Marking
Package
Shipping†
Active High,
LP and FT Mode
0.9
109
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN12T1G
Active High,
LP and FT Mode
1.2
112
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN15T1G
Active High,
LP and FT Mode
1.5
115
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN18T1G
Active High,
LP and FT Mode
1.8
118
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN25T1G
Active High,
LP and FT Mode
2.5
125
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN26T1G
Active High,
LP and FT Mode
2.6
126
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN28T1G
Active High,
LP and FT Mode
2.8
128
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN30T1G
Active High,
LP and FT Mode
3.0
130
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN31T1G
Active High,
LP and FT Mode
3.1
131
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584HSN33T1G
Active High,
LP and FT Mode
3.3
133
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584LSN09T1G
Active Low,
LP and FT Mode
0.9
009
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584LSN12T1G
Active Low,
LP and FT Mode
1.2
012
SOT23−5
(Pb−Free)
3000 / Tape & Reel
NCP584LSN18T1G
Active Low,
LP and FT Mode
1.8
018
SOT23−5
(Pb−Free)
3000 / Tape & Reel
Device
Output Type / Features
NCP584HSN09T1G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Other voltages are available. Consult your ON Semiconductor representative.
http://onsemi.com
13
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOT−23 5−LEAD
CASE 1212−01
ISSUE A
DATE 28 JAN 2011
SCALE 2:1
A
5
E
1
A2
0.05 S
B
D
A1
4
2
L
3
L1
5X
e
E1
b
0.10
C
M
C B
A
S
S
C
RECOMMENDED
SOLDERING FOOTPRINT*
3.30
XXX = Specific Device Code
M = Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
0.95
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DESCRIPTION:
98ASH70518A
SOT−23 5−LEAD
MILLIMETERS
MIN
MAX
--1.45
0.00
0.10
1.00
1.30
0.30
0.50
0.10
0.25
2.70
3.10
2.50
3.10
1.50
1.80
0.95 BSC
0.20
--0.45
0.75
XXX MG
G
0.85
0.56
DIM
A
A1
A2
b
c
D
E
E1
e
L
L1
GENERIC
MARKING DIAGRAM*
5X
5X
DOCUMENT NUMBER:
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSIONS: MILLIMETERS.
3. DATUM C IS THE SEATING PLANE.
A
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative