LDO Regulator, 100 mA,
18V, 1 mA IQ, with PG
NCP711
The NCP711 device is based on unique combination of features −
very low quiescent current, fast transient response and high input and
output voltage ranges. The NCP711 is CMOS LDO regulator designed
for up to 18 V input voltage and 100 mA output current. Quiescent
current of only 1 mA makes this device ideal solution for battery−
powered, always−on systems. Several fixed output voltage versions
are available as well as the adjustable version.
The device (version B) implements power good circuit (PG) which
indicates that output voltage is in regulation. This signal could be used
for power sequencing or as a microcontroller reset.
Internal short circuit and over temperature protections saves the
device against overload conditions.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Operating Input Voltage Range: 2.7 V to 18 V
Output Voltage: 1.2 V to 17 V
Capable of Sourcing 140 mA Peak Output Current
Low Shutdown Current: 100 nA typ.
Very Low Quiescent Current: 1 mA typ.
Low Dropout: 215 mV typ. at 100 mA
Output Voltage Accuracy ±1%
Power Good Output (Version B)
Stable with Small 1 mF Ceramic Capacitors
Built−in Soft Start Circuit to Suppress Inrush Current
Over−Current and Thermal Shutdown Protections
Available in Small TSOP−5 and WDFN6 (2x2) Packages
These Devices are Pb−Free and are RoHS Compliant
MARKING DIAGRAMS
5
TSOP−5
CASE 483
SN SUFFIX
5
1
XXXAYWG
G
1
XXX = Specific Device Code
A
= Assembly Location
Y
= Year
W = Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
WDFN6 (2x2)
CASE 511BR
MT SUFFIX
1
XX M
XX = Specific Device Code
M = Date Code
PIN ASSIGNMENTS
TSOP−5
Typical Applications
•
•
•
•
•
•
www.onsemi.com
Battery Power Tools and Equipment
Home Automation
RF Devices
Metering
Remote Control Devices
White Goods
IN
1
GND
2
EN
3
5
OUT
4
NC/ADJ/PG
CASE 483
WDFN6 (2x2)
6 IN
OUT 1
NC/ADJ 2
GND 3
EP
5 NC/PG
4 EN
CASE511BR
(Top Views)
ORDERING INFORMATION
See detailed ordering and shipping information on page 9 of
this data sheet.
© Semiconductor Components Industries, LLC, 2020
September, 2020 − Rev. 2
1
Publication Order Number:
NCP711/D
NCP711
TYPICAL APPLICATION SCHEMATICS
VIN=6−18V
IN
C IN
1mF
ON
OUT
NCP711A 5.0V
TSOP−5 / WDFN−6
EN
OFF
GND
VIN=6−18V
VOUT=5.0V
COUT
1mF
C IN
1mF
IN
C IN
1mF
NCP711B 5.0V
TSOP−5 / WDFN−6
NC
EN
OFF
GND
ON
EN
ADJ
GND
R1
2M4
PG
R PG
100k
COUT
1mF
R2
750k
Figure 2. Adjustable Output Voltage Application (No PG)
VIN=6−18V
VOUT=5.0V
C OUT
1mF
C FF
1nF
1.2V
OFF
OUT
ON
VOUT=5V
OUT
NCP711A ADJ
TSOP−5 / WDFN−6
NC
Figure 1. Fixed Output Voltage Application (No PG)
VIN=6−18V
IN
IN
C IN
1mF
ON
NCP711B ADJ
Only WDFN−6
1.2V
ADJ
EN
PG
VOUT=5V
OUT
GND
PG
OFF
R1
2M4
C FF
1nF
R2
750k
COUT
1mF
R PG
100k
PG
Figure 3. Fixed Output Voltage Application with PG
Figure 4. Adjustable Output Voltage Application with PG
ǒ
V OUT + V ADJ @ 1 )
www.onsemi.com
2
Ǔ
R1
) I ADJ @ R 1
R2
NCP711
SIMPLIFIED BLOCK DIAGRAMS
IN
OUT
Current limit
UVLO Comparator
UVLO
I EN−PU = 300nA
1.95 V
V CCEN
V−REFERENCE
AND SOFT−START
V REF
1.2V
EA
RADJ1
V FB =1.2V
EN
ADJ
Enable
RADJ2
EN Comparator
GND
THERMAL
SHUTDOWN
0.9 V
PG
PG Comparator
DEGLITCH
DELAY TMR
93% of V REF
NC
Note: Blue objects are valid for ADJ version
Green objects are valid for FIX version
Brown objects are valid for B version (with PG)
Figure 5. Internal Block Diagram
PIN DESCRIPTION
Pin No. TSOP−5 Pin No. WDFN−6
Pin Name
Description
1
6
IN
Power supply input pin.
2
3
GND
Ground pin.
5
1
OUT
LDO output pin.
3
4
EN
Enable input pin (high − enabled, low − disabled). If this pin is connected to IN pin
or if it is left unconnected (pull−up resistor is not required) the device is enabled.
4 (Note 1)
2
ADJ
Adjust input pin. Connect it to the output resistor divider or directly to the OUT pin.
4 (Note 1)
5
PG
Power good output pin. Could be left unconnected or could be connected to GND
if not needed. High level for power ok, low level for fail.
4 (Note 1)
2, 5
NC
Not internally connected. This pin can be tied to the ground plane to improve
thermal dissipation.
NA
EP
EPAD
Connect the exposed pad to GND.
1. Pin function depends on device version.
www.onsemi.com
3
NCP711
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VIN
−0.3 to 22
V
VOUT Voltage
VOUT
−0.3 to [(VIN + 0.3) or 22 V; whichever is lower]
V
EN Voltage
VEN
−0.3 to (VIN + 0.3)
V
ADJ Voltage
VFB/ADJ
−0.3 to 5.5
V
PG Voltage
VPG
−0.3 to (VIN + 0.3)
V
Output Current
IOUT
Internally limited
mA
PG Current
IPG
3
mA
TJ(MAX)
150
°C
TSTG
−55 to 150
°C
ESD Capability, Human Body Model (Note 3)
ESDHBM
2000
V
ESD Capability, Charged Device Model (Note 3)
ESDCDM
1000
V
VIN Voltage (Note 2)
Maximum Junction Temperature
Storage Temperature
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
2. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
3. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per ANSI/ESDA/JEDEC JS−001, EIA/JESD22−A114
ESD Charged Device Model tested per ANSI/ESDA/JEDEC JS−002, EIA/JESD22−C101
THERMAL CHARACTERISTICS (Note 4)
Characteristic
Symbol
WDFN6 2x2
TSOP−5
Unit
RthJA
63
147
°C/W
Thermal Resistance, Junction−to−Case (top)
RthJCt
204
82
°C/W
Thermal Resistance, Junction−to−Case (bottom)
RthJCb
15
N/A
°C/W
Thermal Resistance, Junction−to−Board (top)
RthJBt
47
113
°C/W
Thermal Characterization Parameter, Junction−to−Case (top)
PsiJCt
4
22
°C/W
Thermal Characterization Parameter, Junction−to−Board [FEM]
PsiJB
46
113
°C/W
Thermal Resistance, Junction−to−Air
4. Measured according to JEDEC board specification (board 1S2P, Cu
of the board can be found in JESD51−7.
layer thickness 1 oz, Cu area 650 mm2,
no airflow). Detailed description
ELECTRICAL CHARACTERISTICS (VIN = VOUT−NOM + 1 V and VIN ≥ 2.7 V, VEN = 1.2 V, IOUT = 1 mA, CIN = COUT = 1.0 mF
(effective capacitance – Note 5), TJ = −40°C to 125°C, ADJ tied to OUT, unless otherwise specified) (Note 6)
Parameter
Test Conditions
Recommended Input Voltage
Output Voltage Accuracy
TJ = −40°C to +85°C
Symbol
Min
Typ
Max
Unit
VIN
2.7
−
18
V
VOUT
−1
−
1
%
−1
−
2
TJ = −40°C to +125°C
ADJ Reference Voltage
ADJ version only
VADJ
−
1.2
−
V
ADJ Input Current
VADJ = 1.2 V
IADJ
−0.1
0.01
0.1
mA
Line Regulation
VIN = VOUT−NOM + 1 V to 18 V and VIN ≥ 2.7 V
DVO(DVI)
−
−
0.2
%VOUT
Load Regulation
IOUT = 0.1 mA to 100 mA
DVO(DIO)
−
−
0.4
%VOUT
Quiescent Current (version A)
VIN = VOUT−NOM + 1 V to 18 V, IOUT = 0 mA
IQ
−
1.3
2.5
mA
Quiescent Current (version B)
VIN = VOUT−NOM + 1 V to 18 V, IOUT = 0 mA
−
1.8
3.0
Ground Current
IOUT = 100 mA
IGND
−
325
450
mA
Shutdown Current (Note 10)
VEN = 0 V, IOUT = 0 mA, VIN = 18 V
ISHDN
−
0.35
1.5
mA
Output Current Limit
VOUT = VOUT−NOM − 100 mV
IOLIM
140
250
450
mA
Short Circuit Current
VOUT = 0 V
IOSC
140
250
450
mA
Dropout Voltage (Note 7)
IOUT = 100 mA
VDO
−
215
355
mV
www.onsemi.com
4
NCP711
ELECTRICAL CHARACTERISTICS (VIN = VOUT−NOM + 1 V and VIN ≥ 2.7 V, VEN = 1.2 V, IOUT = 1 mA, CIN = COUT = 1.0 mF
(effective capacitance – Note 5), TJ = −40°C to 125°C, ADJ tied to OUT, unless otherwise specified) (Note 6) (continued)
Parameter
Power Supply Ripple Rejection
Test Conditions
VIN = VOUT−NOM + 2 V
IOUT = 10 mA
Symbol
Min
Typ
Max
Unit
PSRR
−
80
−
dB
10 kHz
−
70
−
100 kHz
−
42
−
1 MHz
−
48
−
VN
−
240
−
mVRMS
V
10 Hz
Output Noise
f = 10 Hz to 100 kHz, VOUT−NOM = 5.0 V
EN Threshold
VEN rising
VEN−TH
0.7
0.9
1.05
EN Hysteresis
VEN falling
VEN−HY
0.01
0.1
0.2
V
EN Internal Pull−up Current
VEN = 1 V, VIN = 5.5 V
IEN−PU
0.01
0.3
1
mA
EN Input Leakage Current
VEN = 18 V, VIN = 18 V
IEN−LK
−1
0.05
1
mA
Start−up time (Note 8)
VOUT−NOM ≤ 3.3 V
tSTART
100
250
500
ms
300
600
1000
VOUT−NOM > 3.3 V
Internal UVLO Threshold
Ramp VIN up until output is turned on
VIUL−TH
1.6
1.95
2.6
V
Internal UVLO Hysteresis
Ramp VIN down until output is turned off
VIUL−HY
0.05
0.2
0.3
V
PG Threshold (Note 9)
VOUT falling
VPG−TH
90
93
96
%
PG Hysteresis (Note 9)
VOUT rising
VPG−HY
0.1
2
4
%
PG Deglitch Time (Note 9)
tPG−DG
75
160
270
ms
PG Delay Time (Note 9)
tPG−DLY
120
320
600
ms
PG Output Low Level Voltage (Note 9) IPG = 1 mA
VPG−OL
−
0.2
0.4
V
PG Output Leakage Current (Note 9)
VPG = 18 V
IPG−LK
−
0.01
1
mA
Thermal Shutdown Temperature
Temperature rising from TJ = +25°C
TSD
−
165
−
°C
Thermal Shutdown Hysteresis
Temperature falling from TSD
TSDH
−
20
−
°C
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
5. Effective capacitance, including the effect of DC bias, tolerance and temperature. See the Application Information section for more
information.
6. Performance guaranteed over the indicated operating temperature range by design and/or characterization. Production tested at TA = 25°C.
Low duty cycle pulse techniques are used during the testing to maintain the junction temperature as close to ambient as possible.
7. Dropout measured when the output voltage falls 100 mV below the nominal output voltage. Limits are valid for all voltage versions.
8. Startup time is the time from EN assertion to point when output voltage is equal to 95% of VOUT−NOM.
9. Applicable only to version B (device option with power good output). PG threshold and PG hysteresis are expressed in percentage of nominal
output voltage.
10. Shutdown current includes EN Internal Pull−up Current.
www.onsemi.com
5
NCP711
TYPICAL CHARACTERISTICS
VIN = VOUT−NOM + 1 V and VIN ≥ 2.7 V, VEN = 1.2 V, IOUT = 1 mA, COUT = 1.0 mF, ADJ tied to OUT, TJ = 25°C, unless otherwise specified
VIN = (VOUT-NOM+ 1 V) to 18 V, VIN ≥ 2.7 V
IOUT = 1 to 100 mA
(V)
1.5%
High limit
2.3
1.0%
OUT
OUTPUT VOLTAGE, V
2.5
High limit
QUIESCENT CURRENT, IQ (mA)
2.0%
VOUT-NOM= 15 V
0.5%
VOUT-NOM= 5 V
0.0%
VOUT-NOM= 1.2 V
-0.5%
Low limit
-1.0%
-1.5%
1.9
1.7
1.5
Version-A
(non PG)
1.3
1.1
VIN = 18 V
IOUT= 0 mA
0.9
-2.0%
-40
-20
0
20
40
60
80
100
JUNCTION TEMPERATURE, TJ ( °C)
0.7
-40
120
Figure 6. Output Voltage vs. Temperature
-20
0
20
40
60
80
JUNCTION TEMPERATURE, TJ ( °C)
100
120
Figure 7. Quiescent Current vs. Temperature
1.6
1.10
ENABLE THRESHOLD VOLTAGE, VEN -TH (V)
High limit
1.4
SHUTDOWN CURRENT, I SHDN ( μA)
Version-B
(with PG)
2.1
Note:
Shutdown current is measured at IN pin
and includes EN pin pull-up current.
1.2
1.0
0.8
0.6
0.4
VIN = 18 V
VEN = 0 V
0.2
0.0
-40
-20
0
20
40
60
80
100
1.05
High limit
1.00
0.95
0.90
0.85
0.80
0.75
Low limit
0.70
0.65
0.60
-40
120
-20
JUNCTION TEMPERATURE, T J ( °C)
0
20
40
60
80
100
120
JUNCTION TEMPERATURE, TJ (°C)
Figure 8. Shutdown Current vs. Temperature
Figure 9. Enable Threshold Voltage vs.
Temperature
0.10
1.4
1.2
ADJ INPUT CURRENT, I ADJ (μA)
ENABLE PULL - UP CURRENT, I EN-PU ( μA)
1.6
High limit
1.0
0.8
0.6
0.4
0.2
High limit
0.08
0.06
0.04
0.02
VEN = 1 V
0.0
-40
-20
0
20
40
60
80
100
0.00
-40
120
TEMPERATURE (°C)
-20
0
20
40
60
80
100
120
TEMPERATURE (°C)
Figure 10. Enable Internal Pull−Up Current vs.
Temperature
Figure 11. ADJ Input Current vs. Temperature
www.onsemi.com
6
NCP711
TYPICAL CHARACTERISTICS
VIN = VOUT−NOM + 1 V and VIN ≥ 2.7 V, VEN = 1.2 V, IOUT = 1 mA, COUT = 1.0 mF, ADJ tied to OUT, TJ = 25°C, unless otherwise specified
400
High limit
DROPOUT VOLTAGE, V DROP (mV)
350
300
VOUT = VOUT-NOM - 100 mV
IOUT = 100 mA
All output voltage versions
250
200
150
100
50
0
-40
-20
0
20
40
60
80
100
JUNCTION TEMPERATURE, TJ ( °C)
Figure 12. Dropout Voltage vs. Temperature
www.onsemi.com
7
120
NCP711
TYPICAL CHARACTERISTICS
VIN = VOUT−NOM + 1 V and VIN ≥ 2.7 V, VEN = 1.2 V, IOUT = 1 mA, COUT = 1.0 mF, ADJ tied to OUT, TJ = 25°C, unless otherwise specified
Figure 14. PSRR − FIX−3.3 V, VIN = 4.3 V, IOUT =
100 mA
Figure 13. PSRR − FIX−3.3 V, COUT = 1 mF,
IOUT = 100 mA
Figure 15. PSRR − FIX−3.3 V, VIN = 8.3 V, IOUT =
100 mA
Figure 16. Noise – FIX − 5.0 V, IOUT = 10 mA,
Different COUT
Figure 17. Noise – ADJ−set−5.0 V with
Different CFF and FIX − 5.0 V
Figure 18. Noise – FIX, IOUT = 10 mA,
COUT = 1 mF, Different VOUT
www.onsemi.com
8
NCP711
ORDERING INFORMATION
Part Number
Marking
Voltage Option (VOUT−NOM)
NCP711ASNADJT1G
GDA
ADJ
NCP711ASN300T1G
GDC
3.0 V
NCP711ASN330T1G
GDD
3.3 V
NCP711ASN500T1G
GDE
5.0 V
NCP711BMTADJTBG
PA
ADJ
NCP711BMT300TBG
PC
3.0 V
NCP711BMT330TBG
PD
3.3 V
NCP711BMT500TBG
PE
5.0 V
Version
Package
Shipping
Without PG
TSOP−5
(Pb−Free)
3000 / Tape & Reel
With PG
WDFN6 2x2
(Pb−Free)
3000 / Tape & Reel
NOTE: To order other package, voltage version or PG / non PG variant, please contact your ON Semiconductor sales representative.
www.onsemi.com
9
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TSOP−5
CASE 483
ISSUE N
5
1
SCALE 2:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE
MINIMUM THICKNESS OF BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR GATE BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT
EXCEED 0.15 PER SIDE. DIMENSION A.
5. OPTIONAL CONSTRUCTION: AN ADDITIONAL
TRIMMED LEAD IS ALLOWED IN THIS LOCATION.
TRIMMED LEAD NOT TO EXTEND MORE THAN 0.2
FROM BODY.
D 5X
NOTE 5
2X
DATE 12 AUG 2020
0.20 C A B
0.10 T
M
2X
0.20 T
5
B
1
4
2
B
S
3
K
DETAIL Z
G
A
A
TOP VIEW
DIM
A
B
C
D
G
H
J
K
M
S
DETAIL Z
J
C
0.05
H
C
SIDE VIEW
SEATING
PLANE
END VIEW
GENERIC
MARKING DIAGRAM*
SOLDERING FOOTPRINT*
0.95
0.037
MILLIMETERS
MIN
MAX
2.85
3.15
1.35
1.65
0.90
1.10
0.25
0.50
0.95 BSC
0.01
0.10
0.10
0.26
0.20
0.60
0_
10 _
2.50
3.00
1.9
0.074
5
5
XXXAYWG
G
1
1
Analog
2.4
0.094
XXX = Specific Device Code
A
= Assembly Location
Y
= Year
W = Work Week
G
= Pb−Free Package
1.0
0.039
XXX MG
G
Discrete/Logic
XXX = Specific Device Code
M = Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
0.7
0.028
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98ARB18753C
TSOP−5
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2018
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
WDFN6 2x2, 0.65P
CASE 511BR
ISSUE C
DATE 01 DEC 2021
GENERIC
MARKING DIAGRAM*
1
XX M
XX = Specific Device Code
M = Date Code
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
DOCUMENT NUMBER:
DESCRIPTION:
98AON55829E
WDFN6 2X2, 0.65P
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative