NCV8664_07

NCV8664 Ultra−Low Iq Low Dropout Linear Regulator The NCV8664 is a precision 3.3 V and 5.0 V fixed output, low dropout integrated voltage regulator with an output current capability of 150 mA. Careful management of light load current consumption, combined with a low leakage process, achieve a typical quiescent current of 22 mA. NCV8664 is pin and functionally compatible with NCV4264 and NCV4264−2, and it could replace these parts when very low quiescent current is required. The output voltage is accurate within "2.0%, and maximum dropout voltage is 600 mV at full rated load current. It is internally protected against input supply reversal, output overcurrent faults, and excess die temperature. No external components are required to enable these features. Features http://onsemi.com MARKING DIAGRAMS TAB 1 2 3 SOT−223 ST SUFFIX CASE 318E AYM V664x 1 4 12 • • • • • • • • • • 3.3 V, 5.0 V Fixed Output "2.0% Output Accuracy, Over Full Temperature Range 30 mA Maximum Quiescent Current at IOUT = 100 mA 600 mV Maximum Dropout Voltage at 150 mA Load Current Wide Input Voltage Operating Range of 4.5 V to 45 V Internal Fault Protection ♦ −42 V Reverse Voltage ♦ Short Circuit/Overcurrent ♦ Thermal Overload NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes AEC−Q100 Qualified EMC Compliant This is a Pb−Free Device DPAK DT SUFFIX CASE 369C 1 V66450G ALYWW 3 x A L Y WW M G = Voltage Rating (5 = 5.0 V Version) (3 = 3.3 V Version) = Assembly Location = Wafer Lot = Year = Work Week = Date Code = Pb−Free Package PIN CONNECTIONS PIN 1 2, TAB 3 FUNCTION VIN GND VOUT ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 11 of this data sheet. © Semiconductor Components Industries, LLC, 2007 March, 2007 − Rev. 7 1 Publication Order Number: NCV8664/D NCV8664 IN Bias Current Generators 1.3 V Reference OUT + Error Amp − Thermal Shutdown GND Figure 1. Block Diagram PIN FUNCTION DESCRIPTION Pin No. 1 2 3 TAB Symbol VIN GND VOUT GND Unregulated input voltage; 4.5 V to 45 V. Ground; substrate. Regulated output voltage; collector of the internal PNP pass transistor. Ground; substrate and best thermal connection to the die. Function OPERATING RANGE Pin Symbol, Parameter VIN, DC Input Operating Voltage Junction Temperature Operating Range Symbol VIN TJ Min 4.5 −40 Max +45 +150 Unit V _C MAXIMUM RATINGS Rating VIN, DC Voltage VOUT, DC Voltage Storage Temperature ESD Capability, Human Body Model (Note 1) ESD Capability, Machine Model (Note 1) Symbol VIN VOUT Tstg VESDHB VESDMIM Min −42 −0.3 −55 4000 200 Max +45 +16 +150 − − Unit V V _C V V Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. This device series incorporates ESD protection and is tested by the following methods: ESD HBM tested per AEC−Q100−002 (EIA/JESD22−A 114C) ESD MM tested per AEC−Q100−003 (EIA/JESD22−A 115C) Thermal Resistance Parameter Junction−to−Ambient Junction−to−Ambient Junction−to−Case Junction−to−Case 2. 1 oz., 100 mm2 copper area. DPAK SOT−223 DPAK SOT−223 Symbol RqJA RqJA RqJC RqJC Condition Min − − − − Max 101 (Note 2) 99 (Note 2) 9.0 17 Unit °C/W °C/W °C/W °C/W http://onsemi.com 2 NCV8664 Lead Soldering Temperature and MSL Rating Lead Temperature Soldering Reflow (SMD Styles Only), Lead Free (Note 3) Moisture Sensitivity Level SOT223 DPAK 3. Lead Free, 60 sec – 150 sec above 217_C, 40 sec max at peak. Symbol Tsld MSL 3 1 − − Min − Max 265 pk Unit _C − ELECTRICAL CHARACTERISTICS (VIN = 13.5 V, Tj = −40_C to +150_C, unless otherwise noted.) Characteristic Output Voltage 5.0 V Version Output Voltage 3.3 V Version Line Regulation Load Regulation Dropout Voltage 5.0 V Version Dropout Voltage 3.3 V Version Quiescent Current Symbol VOUT VOUT DVOUT vs. VIN DVOUT vs. IOUT VIN−VOUT VIN−VOUT Iq Test Conditions 0.1 mA v IOUT v 150 mA (Note 4) 6.0 V v VIN v 28 V 0.1 mA v IOUT v 150 mA (Note 4) 4.5 V v VIN v 28 V IOUT = 5.0 mA 6.0 V v VIN v 28 V 1.0 mA v IOUT v 150 mA (Note 4) IQ = 100 mA (Notes 4 & 5) IQ = 150 mA (Notes 4 & 5) IQ = 100 mA (Notes 4 & 7) IQ = 150 mA (Notes 4 & 7) IOUT = 100 mA TJ = 25_C TJ = −40_C to +85_C IOUT = 50 mA (Note 4) IOUT = 150 mA (Note 4) VRIPPLE = 0.5 VP−P, F = 100 Hz IOUT = 0.1 mA to 150 mA (Note 4) IOUT = 0.1 mA to 150 mA (Note 4) Min 4.900 Typ 5.000 Max 5.100 Unit V 3.234 3.300 3.366 V −25 −35 − − − − − − − − − 10 − 22 − 5.0 5.0 265 315 − − 21 22 1.3 8.0 67 − − − − +25 +35 500 600 1.266 1.266 29 30 3 15 − − 9.0 − 18 mV mV mV V mA Active Ground Current Power Supply Rejection Output Capacitor for Stability 5.0 V Version Output Capacitor for Stability 3.3 V Version PROTECTION Current Limit Short Circuit Current Limit Thermal Shutdown Threshold 4. 5. 6. 7. IG(ON) PSRR COUT ESR COUT ESR mA dB mF W mF W IOUT(LIM) IOUT(SC) TTSD VOUT = 4.5 V (5.0 V Version) (Note 4) VOUT = 3.0 V (3.3 V Version) (Note 4) VOUT = 0 V (Note 4) (Note 6) 150 150 100 150 − − − − 500 500 500 200 mA mA _C Use pulse loading to limit power dissipation. Dropout voltage = (VIN – VOUT), measured when the output voltage has dropped 100 mV relative to the nominal value obtained with VIN = 13.5 V. Not tested in production. Limits are guaranteed by design. VDO = VIN − VOUT. For output voltage set to < 4.5 V, VDO will be constrained by the minimum input voltage. http://onsemi.com 3 NCV8664 4.5−45 V Input II CIN 1.0 mF 100 nF Vin Vout IQ Output RL 1 8664 2 GND 3 COUT 10 mF, 5.0 V Version 22 mF, 3.3 V Version Figure 2. Measurement Circuit 4.5−45 V Input Vin CIN 100 nF 1 8664 2 GND 3 Vout Output COUT 10 mF, 5.0 V Version 22 mF, 3.3 V Version Figure 3. Applications Circuit http://onsemi.com 4 NCV8664 Typical Curves 1000 100 10 1.0 0.1 Stable Region 0.01 0 20 40 60 80 100 120 Vin = 13.5 V 140 160 180 Maximum ESR Cout = 10, 22 mF OUTPUT VOLTAGE (V) 6.0 5.0 4.0 3.0 2.0 1.0 0 ESR (W) 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 LOAD CURRENT (mA) INPUT VOLTAGE (V) Figure 4. ESR Characterization, 5.0 V Version 9.0 QUIESCENT CURRENT (mA) 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 50 100 150 200 Vin = 13.5 V 0.40 QUIESCENT CURRENT (mA) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 Figure 5. Output Voltage vs. Input Voltage, 5.0 V Version 125°C 25°C −40°C 125°C 25°C −40°C Vin = 13.5 V 5.0 10 15 20 OUTPUT CURRENT (mA) OUTPUT CURRENT (mA) Figure 6. Current Consumption vs. Output Load, 5.0 V Version 45 QUIESCENT CURRENT (mA) QUIESCENT CURRENT (mA) 40 35 30 25 20 15 10 5.0 0 −50 0 50 TEMPERATURE (°C) 100 150 Vin = 13.5 V Iout = 100 mA 12 Figure 7. Current Consumption vs. Output Load (Low Load), 5.0 V Version Vin = 13.5 V 10 Iout = 150 mA 8.0 6.0 4.0 2.0 0 −50 Iout = 100 mA 0 50 TEMPERATURE (°C) 100 150 Figure 8. Quiescent Current vs. Temperature, 5.0 V Version Figure 9. Quiescent Current vs. Temperature, 5.0 V Version http://onsemi.com 5 NCV8664 Typical Curves 0.45 CURRENT CONSUMPTION (mA) 0.40 0.35 DROPOUT (V) 0.30 0.25 0.20 0.15 0.10 0.05 0 0 50 100 OUTPUT LOAD (mA) 150 200 25°C −40°C 125°C 18 16 14 12 10 8.0 6.0 4.0 2.0 0 0 10 RL = 100 W 20 30 40 50 RL = 50 W INPUT VOLTAGE (V) Figure 10. Dropout Voltage vs. Output Load, 5.0 V Version 160 140 OUTPUT CURRENT (mA) 120 100 80 60 40 20 0 0 10 20 30 40 50 TA = 125°C TA = 25°C OUTPUT VOLTAGE (V) 5.10 5.08 5.06 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 −50 Figure 11. Current Consumption vs. Input Voltage, 5.0 V Version Vin = 13.5 V Load = 10 mA 0 50 TEMPERATURE (°C) 100 150 INPUT VOLTAGE (V) Figure 12. Output Current vs. Input Voltage, 5.0 V Version 400 350 OUTPUT CURRENT (mA) 300 250 200 150 100 50 0 −50 0 50 TEMPERATURE (°C) Vin = 13.5 V Figure 13. Output Voltage vs. Temperature, 5.0 V Version 100 150 Figure 14. Current Limit vs. Temperature, 5.0 V Version http://onsemi.com 6 NCV8664 Typical Curves 100 90 OUTPUT VOLTAGE (V) 80 70 ESR (W) 60 50 40 30 20 10 0 Vin = 13.5 V Cout > 22 mF 0 25 50 75 100 125 150 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 Iout = 5 mA 40 OUTPUT LOAD (mA) INPUT VOLTAGE (V) Figure 15. ESR Stability, 3.3 V Version 9.0 QUIESCENT CURRENT (mA) 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 50 100 OUTPUT LOAD (mA) Vin = 13.5 V 150 200 0.50 QUIESCENT CURRENT (mA) 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 Figure 16. Output Voltage vs. Input Voltage, 3.3 V Version 125°C 25°C −40°C 125°C 25°C −40°C 0 5 10 15 20 25 OUTPUT LOAD (mA) Figure 17. Current Consumption vs. Output Load, 3.3 V Version 45 QUIESCENT CURRENT (mA) QUIESCENT CURRENT (mA) 40 35 30 25 20 15 10 5 0 −40 10 60 TEMPERATURE (°C) Vin = 13.5 V Iout = 100 mA 110 160 10 9 8 7 6 5 4 3 2 1 0 −40 Figure 18. Current Consumption vs. Output Load (Low Load), 3.3 V Version Vin = 13.5 V 10 60 TEMPERATURE (°C) 110 160 Figure 19. Quiescent Current vs. Temperature, 3.3 V Version Figure 20. Quiescent Current vs. Temperature, 3.3 V Version http://onsemi.com 7 NCV8664 Typical Curves 0.45 CURRENT CONSUMPTION (mA) 0.40 DROPOUT VOLTAGE (V) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 50 100 OUTPUT LOAD (mA) 150 200 7 6 5 4 3 2 1 0 0 10 RL = 50 W RL = 100 W 20 30 40 50 INPUT VOLTAGE (V) Figure 21. Dropout Voltage, 3.3 V Version Figure 22. Current Consumption vs. Input Voltage, 3.3 V Version 250 200 TEMPERATURE (°C) 150 100 50 Vin = 13.5 V 120 0 −40 10 60 CURRENT LIMIT (mA) 110 160 3.50 3.45 OUTPUT VOLTAGE (V) 3.40 3.35 3.30 3.25 3.20 3.15 3.10 3.05 3.00 −40 Vin = 14 V Iout = 5 mA −20 0 20 40 60 80 100 TEMPERATURE (°C) Figure 23. Output Voltage vs. Temperature, 3.3 V Version Figure 24. Current Limit vs. Temperature, 3.3 V Version http://onsemi.com 8 NCV8664 Circuit Description The NCV8664 is a precision trimmed 3.3 V and 5.0 V fixed output regulator. Careful management of light load consumption combined with a low leakage process results in a typical quiescent current of 22 mA. The device has current capability of 150 mA, with 600 mV of dropout voltage at full rated load current. The regulation is provided by a PNP pass transistor controlled by an error amplifier with a bandgap reference. The regulator is protected by both current limit and short circuit protection. Thermal shutdown occurs above 150°C to protect the IC during overloads and extreme ambient temperatures. Regulator Calculating Power Dissipation in a Single Output Linear Regulator The maximum power dissipation for a single output regulator (Figure 3) is: PD(max) + [VIN(max) * VOUT(min)] @ IQ(max) ) VI(max) @ Iq (eq. 1) The error amplifier compares the reference voltage to a sample of the output voltage (Vout) and drives the base of a PNP series pass transistor by a buffer. The reference is a bandgap design to give it a temperature−stable output. Saturation control of the PNP is a function of the load current and input voltage. Over saturation of the output power device is prevented, and quiescent current in the ground pin is minimized. Regulator Stability Considerations Where: VIN(max) is the maximum input voltage, VOUT(min) is the minimum output voltage, IQ(max) is the maximum output current for the application, and Iq is the quiescent current the regulator consumes at IQ(max). Once the value of PD(Max) is known, the maximum permissible value of RqJA can be calculated: PqJA + 150 oC * TA PD (eq. 2) The input capacitor CIN in Figure 2 is necessary for compensating input line reactance. Possible oscillations caused by input inductance and input capacitance can be damped by using a resistor of approximately 1 W in series with CIN. The output or compensation capacitor, COUT helps determine three main characteristics of a linear regulator: startup delay, load transient response and loop stability. The capacitor value and type should be based on cost, availability, size and temperature constraints. Tantalum, aluminum electrolytic, film, or ceramic capacitors are all acceptable solutions, however, attention must be paid to ESR constraints. The aluminum electrolytic capacitor is the least expensive solution, but, if the circuit operates at low temperatures (−25°C to −40°C), both the value and ESR of the capacitor will vary considerably. The capacitor manufacturer’s data sheet usually provides this information. The value for the output capacitor COUT shown in Figure 2 should work for most applications; however, it is not necessarily the optimized solution. Stability is guaranteed at values COUT ≥ 10 mF for 5.0 V version, and COUT ≥ 22 mF for 3.3 V version and an ESR ≤ 9 W within the operating temperature range. Actual limits are shown in a graph in the Typical Performance Characteristics section. The value of RqJA can then be compared with those in the package section of the data sheet. Those packages with RqJA’s less than the calculated value in Equation 2 will keep the die temperature below 150°C. In some cases, none of the packages will be sufficient to dissipate the heat generated by the IC, and an external heat sink will be required. The current flow and voltages are shown in the Measurement Circuit Diagram. Heat Sinks A heat sink effectively increases the surface area of the package to improve the flow of heat away from the IC and into the surrounding air. Each material in the heat flow path between the IC and the outside environment will have a thermal resistance. Like series electrical resistances, these resistances are summed to determine the value of RqJA: RqJA + RqJC ) RqCS ) RqSA (eq. 3) Where: RqJC = the junction−to−case thermal resistance, RqCS = the case−to−heat sink thermal resistance, and RqSA = the heat sink−to−ambient thermal resistance. RqJA appears in the package section of the data sheet. Like RqJA, it too is a function of package type. RqCS and RqSA are functions of the package type, heat sink and the interface between them. These values appear in data sheets of heat sink manufacturers. Thermal, mounting, and heat sinking are discussed in the ON Semiconductor application note AN1040/D, available on the ON Semiconductor Website. http://onsemi.com 9 NCV8664 EMC−Characteristics: Conducted Susceptibility All EMC−Characteristics are based on limited samples and not part of production testing, according to 47A/658/CD IEC62132−4 (Direct Power Injection) Test Conditions Direct Power Injection: 33 dBm forward power CW Acceptance Criteria: Amplitude Dev. max 2% of Output Voltage Supply Voltage Temperature Load VIN = 12 V TA = 23°C ±5°C RL = 35 W U1 NCV8664 VOUT GND C2 + 10 mF C1 47 nF 2 3 F1 FERRITE X4 VOUT_MON X3 VOUT_HF + VIN X1 VIN_HF F3 FERRITE X2 VIN_MON 1 C3 10 nF C4 10 mF F2 FERRITE X5 GND_HF X6 GND_MON Figure 25. Test Circuit 40 VIN−pin pass 33 dBm 30 VOUT (dBm) VIN (dBm) 40 VOUT−pin pass 33 dBm 30 20 20 10 10 0 1 10 100 1000 0 1 10 100 1000 FREQUENCY (MHz) FREQUENCY (MHz) Figure 1. Typical VIN−pin Susceptibility Figure 2. Typical VOUT−pin Susceptibility http://onsemi.com 10 NCV8664 120 100 80 60 40 20 0 SOT223 DPAK qJA (°C/W) 0 100 200 300 400 500 600 700 COPPER AREA (mm2) Figure 3. qJA vs. Copper Spreader Area 100 SOT223 10 R(t) (°C/W) DPAK 1.0 0.1 0.000001 0.00001 0.0001 0.001 0.01 0.1 1.0 10 100 1000 PULSE TIME (sec) Figure 4. Single−Pulse Heating Curves ORDERING INFORMATION Device NCV8664DT50RKG NCV8664ST50T3G NCV8664ST33T3G Marking V66450G V6645 V6643 Package DPAK SOT−223 SOT−223 Shipping† 2500/T ape & Reel 4000/T ape & Reel 4000/T ape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. http://onsemi.com 11 NCV8664 PACKAGE DIMENSIONS SOT−223 (TO−261) ST SUFFIX CASE 318E−04 ISSUE L D b1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. MILLIMETERS NOM MAX 1.63 1.75 0.06 0.10 0.75 0.89 3.06 3.20 0.29 0.35 6.50 6.70 3.50 3.70 2.30 2.40 0.94 1.05 1.75 2.00 7.00 7.30 10 ° − INCHES NOM 0.064 0.002 0.030 0.121 0.012 0.256 0.138 0.091 0.037 0.069 0.276 − 4 HE 1 2 3 E e1 b e A q L1 C DIM A A1 b b1 c D E e e1 L1 HE q MIN 1.50 0.02 0.60 2.90 0.24 6.30 3.30 2.20 0.85 1.50 6.70 0° MIN 0.060 0.001 0.024 0.115 0.009 0.249 0.130 0.087 0.033 0.060 0.264 0° MAX 0.068 0.004 0.035 0.126 0.014 0.263 0.145 0.094 0.041 0.078 0.287 10 ° 0.08 (0003) A1 SOLDERING FOOTPRINT* 3.8 0.15 2.0 0.079 2.3 0.091 2.3 0.091 6.3 0.248 2.0 0.079 1.5 0.059 mm inches SCALE 6:1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 12 NCV8664 PACKAGE DIMENSIONS DPAK (Single Gauge) DT SUFFIX CASE 369C ISSUE O −T− B V R 4 SEATING PLANE C E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D E F G H J K L R S U V Z INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− S A 1 2 3 Z U K F L D G 2 PL J H 0.13 (0.005) M T RECOMMENDED FOOTPRINT 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm inches ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 13 NCV8664/D