NGTB30N60FLWG
IGBT
This Insulated Gate Bipolar Transistor (IGBT) features a robust and
cost effective Trench construction, and provides superior performance
in demanding switching applications, offering both low on state
voltage and minimal switching loss.
http://onsemi.com
Features
•
•
•
•
•
•
Low Saturation Voltage using Trench with Field Stop Technology
Low Switching Loss Reduces System Power Dissipation
Soft Fast Reverse Recovery Diode
Optimized for High Speed Switching
5 ms Short−Circuit Capability
These are Pb−Free Devices
30 A, 600 V
VCEsat = 1.65 V
C
Typical Applications
G
• Solar Inverters
• Uninterruptable Power Supply (UPS)
E
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector−emitter voltage
VCES
600
V
Collector current
@ TC = 25°C
@ TC = 100°C
IC
Pulsed collector current, Tpulse
limited by TJmax
Diode Forward Current
@ TC = 25°C
@ TC = 100°C
ICM
IF
A
60
30
G
120
A
MARKING DIAGRAM
IFM
120
A
Short−circuit withstand time
VGE = 15 V, VCE = 300 V,
TJ ≤ +150°C
tSC
5
ms
Gate−emitter voltage
Transient Gate Emitter Voltage
(tp = 5 ms, D < 0.010)
VGE
Power Dissipation
@ TC = 25°C
@ TC = 100°C
PD
Operating junction temperature
range
TJ
−55 to +150
°C
Storage temperature range
Tstg
−55 to +150
°C
Lead temperature for soldering, 1/8”
from case for 5 seconds
TSLD
260
°C
30N60FL
AYWWG
V
$20
$30
W
250
67
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
June, 2013 − Rev. 1
TO−247
CASE 340L
STYLE 4
E
A
60
30
Diode Pulsed Current
Tpulse Limited by TJmax
© Semiconductor Components Industries, LLC, 2013
C
1
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
NGTB30N60FLWG
TO−247
(Pb−Free)
30 Units / Rail
Publication Order Number:
NGTB30N60FLW/D
NGTB30N60FLWG
THERMAL CHARACTERISTICS
Symbol
Value
Unit
Thermal resistance junction−to−case, for IGBT
Rating
RqJC
0.486
°C/W
Thermal resistance junction−to−case, for Diode
RqJC
1.06
°C/W
Thermal resistance junction−to−ambient
RqJA
40
°C/W
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
VGE = 0 V, IC = 500 mA
V(BR)CES
600
−
−
V
VGE = 15 V, IC = 30 A
VGE = 15 V, IC = 30 A, TJ = 150°C
VCEsat
1.4
−
1.65
2.0
1.9
−
V
VGE = VCE, IC = 200 mA
VGE(th)
4.5
5.5
6.5
V
Collector−emitter cut−off current, gate−
emitter short−circuited
VGE = 0 V, VCE = 600 V
VGE = 0 V, VCE = 600 V, TJ = 150°C
ICES
−
−
−
−
0.2
2
mA
Gate leakage current, collector−emitter
short−circuited
VGE = 20 V , VCE = 0 V
IGES
−
−
100
nA
Cies
−
4200
−
pF
Coes
−
170
−
Cres
−
110
−
Qg
−
170
−
Qge
−
34
−
Qgc
−
83
−
td(on)
−
83
−
tr
−
31
−
td(off)
−
170
−
tf
−
80
−
Eon
−
0.7
−
Turn−off switching loss
Eoff
−
0.28
−
Total switching loss
Ets
−
0.98
−
Turn−on delay time
td(on)
−
81
−
tr
−
32
−
td(off)
−
180
−
tf
−
110
−
STATIC CHARACTERISTIC
Collector−emitter breakdown voltage,
gate−emitter short−circuited
Collector−emitter saturation voltage
Gate−emitter threshold voltage
DYNAMIC CHARACTERISTIC
Input capacitance
Output capacitance
VCE = 20 V, VGE = 0 V, f = 1 MHz
Reverse transfer capacitance
Gate charge total
Gate to emitter charge
VCE = 480 V, IC = 30 A, VGE = 15 V
Gate to collector charge
nC
SWITCHING CHARACTERISTIC, INDUCTIVE LOAD
Turn−on delay time
Rise time
Turn−off delay time
Fall time
Turn−on switching loss
TJ = 25°C
VCC = 400 V, IC = 30 A
Rg = 10 W
VGE = 0 V/ 15 V
Rise time
Turn−off delay time
Fall time
Turn−on switching loss
TJ = 150°C
VCC = 400 V, IC = 30 A
Rg = 10 W
VGE = 0 V/ 15 V
Eon
−
0.82
−
Turn−off switching loss
Eoff
−
0.63
−
Total switching loss
Ets
−
1.45
−
http://onsemi.com
2
ns
mJ
ns
mJ
NGTB30N60FLWG
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
VGE = 0 V, IF = 30 A
VGE = 0 V, IF = 30 A, TJ = 150°C
VF
1.45
−
1.9
2.0
2.35
−
V
trr
−
72
−
ns
Qrr
−
0.25
−
mC
Irrm
−
6
−
A
DIODE CHARACTERISTIC
Forward voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
TJ = 25°C
IF = 30 A, VR = 200 V
diF/dt = 200 A/ms
http://onsemi.com
3
NGTB30N60FLWG
TYPICAL CHARACTERISTICS
180
TJ = 25°C
160
140
120
100
11 V
80
10 V
60
40
9V
20
7V
0
1
3
4
6
5
7
100
11 V
80
60
10 V
40
9V
20
8V
7V
0
1
2
3
4
5
6
7
Figure 1. Output Characteristics
Figure 2. Output Characteristics
TJ = −55°C
140
120
11 V
100
80
60
10 V
40
9V
20
7 V to 8 V
1
2
3
4
8
160
VGE = 17 V to 13 V
0
120
VCE, COLLECTOR−EMITTER VOLTAGE (V)
160
0
140
0
8
VGE = 17 V to 13 V
TJ = 150°C
160
VCE, COLLECTOR−EMITTER VOLTAGE (V)
180
IC, COLLECTOR CURRENT (A)
2
8V
IC, COLLECTOR CURRENT (A)
0
VCE, COLLECTOR−EMITTER VOLTAGE (V)
IC, COLLECTOR CURRENT (A)
VGE = 17 V to 13 V
5
6
7
140
TJ = 25°C
120
TJ = 150°C
100
80
60
40
20
0
8
0
4
8
16
12
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VGE, GATE−EMITTER VOLTAGE (V)
Figure 3. Output Characteristics
Figure 4. Typical Transfer Characteristics
3.0
10,000
Cies
IC = 60 A
2.5
IC = 30 A
2.0
IC = 15 A
1.5
IC = 5 A
1.0
CAPACITANCE (pF)
IC, COLLECTOR CURRENT (A)
200
180
1000
Coes
100
Cres
0.5
0
−75
−25
25
75
125
175
10
0
20
40
60
80
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 5. VCE(sat) vs. TJ
Figure 6. Typical Capacitance
http://onsemi.com
4
100
NGTB30N60FLWG
TYPICAL CHARACTERISTICS
20
VGE, GATE−EMITTER VOLTAGE (V)
IF, FORWARD CURRENT (A)
70
60
50
TJ = 25°C
40
TJ = 150°C
30
20
10
0
0
0.5
1.0
2.0
1.5
2.5
3.0
0
100
75
150
125
Figure 8. Typical Gate Charge
175
200
1000
Eoff
0.6
SWITCHING TIME (ns)
0.7
Eon
0.5
0.4
0.3
VCE = 400 V
VGE = 15 V
IC = 30 A
Rg = 10 W
0.2
0.1
0
2
20
40
60
80
100
1.6
1.4
120
140
td(off)
10
VCE = 400 V
VGE = 15 V
IC = 30 A
Rg = 10 W
0
20
40
60
80
100
120
140 160
TJ, JUNCTION TEMPERATURE (°C)
Figure 9. Switching Loss vs. Temperature
Figure 10. Switching Time vs. Temperature
1000
Eon
1.2
1
0.8
Eoff
0.6
0.4
td(off)
tf
100
td(on)
tr
10
VCE = 400 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
0.2
8
td(on)
tr
1
160
tf
100
TJ, JUNCTION TEMPERATURE (°C)
VCE = 400 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
1.8
0
50
25
0
Figure 7. Diode Forward Characteristics
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
5
QG, GATE CHARGE (nC)
0.8
SWITCHING LOSS (mJ)
10
VF, FORWARD VOLTAGE (V)
0.9
0
VCE = 480 V
15
16
24
32
40
48
56
1
64
8
16
24
32
40
48
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 11. Switching Loss vs. IC
Figure 12. Switching Time vs. IC
http://onsemi.com
5
56
64
NGTB30N60FLWG
TYPICAL CHARACTERISTICS
2.5
SWITCHING LOSS (mJ)
1000
VCE = 400 V
VGE = 15 V
IC = 30 A
TJ = 150°C
2
td(off)
Eon
SWITCHING TIME (ns)
3
1.5
Eoff
1
0.5
5
SWITCHING LOSS (mJ)
1.8
15
25
35
45
55
65
15
25
35
45
55
65
75
85
1000
Eon
275
325
375
425
475
525
td(off)
tf
100
td(on)
10
tr
VGE = 15 V
IC = 30 A
Rg = 10 W
TJ = 150°C
1
175
575
225
275
325
375
425
475
525
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 15. Switching Loss vs. VCE
Figure 16. Switching Time vs. VCE
575
1000
100 ms
100
1 ms
10
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
5
Figure 14. Switching Time vs. Rg
1000
50 ms
dc operation
1
Single Nonrepetitive
Pulse TC = 25°C
Curves must be derated
linearly with increase
in temperature
0.1
0.01
VCE = 400 V
VGE = 15 V
IC = 30 A
TJ = 150°C
Figure 13. Switching Loss vs. Rg
0.6
225
10
Rg, GATE RESISTOR (W)
Eoff
0
175
tr
1
85
td(on)
Rg, GATE RESISTOR (W)
VGE = 15 V
IC = 30 A
Rg = 10 W
TJ = 150°C
1.2
75
SWITCHING TIME (ns)
0
tf
100
1
10
100
1000
100
10
1
VGE = 15 V, TC = 125°C
1
10
100
1000
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 17. Safe Operating Area
Figure 18. Reverse Bias Safe Operating Area
http://onsemi.com
6
NGTB30N60FLWG
TYPICAL CHARACTERISTICS
0.6
RqJC = 0.486
0.5
R(t) (°C/W)
0.4
0.3
50% Duty Cycle
0.2
0.1
Junction R1
5%
20%
10%
C1
2%
0.0001
R2
Rn Case
0.001
0.01
C2
0.009004
0.031623
0.002971
0.004024
0.984432
0.050668
0.083685
0.062412
0.119496
0.168644
0.187512
0.062579
1.597970
Cn
0.1
ti (sec)
0.001111
0.001000
0.033663
0.078587
0.001016
Ci = ti/Ri
Single Pulse
0
0.00001
Ri (°C/W)
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
1
10
PULSE TIME (sec)
Figure 19. IGBT Transient Thermal Impedance
10
R(t) (°C/W)
1
RqJC = 1.06
50% Duty Cycle
20%
0.1
Junction R1
Rn
Case
2%
C1
1%
0.00001
Cn
ti (sec)
1.48E−4
0.002
0.03
0.1
2.0
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
Single Pulse
0.001
0.000001
C2
Ri (°C/W)
0.20043
0.42428
0.51036
0.34767
0.11135
Ci = ti/Ri
5%
0.01
R2
10%
0.0001
0.001
0.01
0.1
1
PULSE TIME (sec)
Figure 20. Diode Transient Thermal Impedance
Figure 21. Test Circuit for Switching Characteristics
http://onsemi.com
7
10
100
1000
NGTB30N60FLWG
Figure 22. Definition of Turn On Waveform
http://onsemi.com
8
NGTB30N60FLWG
Figure 23. Definition of Turn Off Waveform
http://onsemi.com
9
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−247
CASE 340L
ISSUE G
DATE 06 OCT 2021
SCALE 1:1
GENERIC
MARKING DIAGRAM*
XXXXXXXXX
AYWWG
STYLE 1:
PIN 1.
2.
3.
4.
GATE
DRAIN
SOURCE
DRAIN
STYLE 2:
PIN 1.
2.
3.
4.
ANODE
CATHODE (S)
ANODE 2
CATHODES (S)
STYLE 5:
PIN 1.
2.
3.
4.
CATHODE
ANODE
GATE
ANODE
STYLE 6:
PIN 1.
2.
3.
4.
MAIN TERMINAL 1
MAIN TERMINAL 2
GATE
MAIN TERMINAL 2
DOCUMENT NUMBER:
DESCRIPTION:
STYLE 3:
PIN 1.
2.
3.
4.
98ASB15080C
TO−247
BASE
COLLECTOR
EMITTER
COLLECTOR
STYLE 4:
PIN 1.
2.
3.
4.
GATE
COLLECTOR
EMITTER
COLLECTOR
XXXXX
A
Y
WW
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2021
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative