NGTB40N120LWG

NGTB40N120LWG IGBT This Insulated Gate Bipolar Transistor (IGBT) features a robust and cost effective Field Stop (FS) Trench construction, and provides superior performance in demanding switching applications. Offering both low on−state voltage and minimal switching loss, the IGBT is well suited for resonant or soft switching applications. Incorporated into the device is a rugged co−packaged free wheeling diode with a low forward voltage. http://onsemi.com 40 A, 1200 V VCEsat = 1.90 V Eoff = 1.40 mJ Features • • • • • Low Saturation Voltage using Trench with Field Stop Technology Low Switching Loss Reduces System Power Dissipation Low Gate Charge 5 ms Short−Circuit Capability These are Pb−Free Devices C Typical Applications • • • • G Inverter Welding Machines Microwave Ovens Industrial Switching Motor Control Inverter E ABSOLUTE MAXIMUM RATINGS Symbol Value Unit Collector−emitter voltage Rating VCES 1200 V Collector current @ TC = 25°C @ TC = 100°C IC Pulsed collector current, Tpulse limited by TJmax Diode forward current @ TC = 25°C @ TC = 100°C ICM IF A 80 40 320 A IFM Gate−emitter voltage VGE Power Dissipation @ TC = 25°C @ TC = 100°C PD Short−Circuit Withstand Time VGE = 15 V, VCE = 600 V, TJ ≤ 150°C Tsc 5 ms Operating junction temperature range TJ −55 to +150 °C Storage temperature range Tstg −55 to +150 °C Lead temperature for soldering, 1/8” from case for 5 seconds TSLD 260 °C 320 TO−247 CASE 340L STYLE 4 E MARKING DIAGRAM A 40N120L AYWWG V $20 W 260 104 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. September, 2012 − Rev. 0 C A 80 40 Diode pulsed current, Tpulse limited by TJmax © Semiconductor Components Industries, LLC, 2012 G 1 A Y WW G = Assembly Location = Year = Work Week = Pb−Free Package ORDERING INFORMATION Device NGTB40N120LWG Package Shipping TO−247 30 Units / Rail (Pb−Free) Publication Order Number: NGTB40N120L/D NGTB40N120LWG THERMAL CHARACTERISTICS Symbol Value Unit Thermal resistance junction−to−case, for IGBT Rating RqJC 0.48 °C/W Thermal resistance junction−to−case, for Diode RqJC 1.5 °C/W Thermal resistance junction−to−ambient RqJA 40 °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Test Conditions Symbol Min Typ Max Unit VGE = 0 V, IC = 500 mA V(BR)CES 1200 − − V VGE = 15 V, IC = 40 A VGE = 15 V, IC = 25 A, TJ = 150°C VCEsat 1.45 − 1.90 2.1 2.35 − V VGE = VCE, IC = 400 mA VGE(th) 4.5 5.5 6.5 V Collector−emitter cut−off current, gate− emitter short−circuited VGE = 0 V, VCE = 1200 V VGE = 0 V, VCE = 1200 V, TJ = 150°C ICES − − − − 0.5 2.0 mA Gate leakage current, collector−emitter short−circuited VGE = 20 V, VCE = 0 V IGES − − 200 nA Cies − 10,400 − pF Coes − 245 − Cres − 185 − Qg − 420 − Qge − 95 − Qgc − 178 − td(on) − 140 − tr − 40 − td(off) − 360 − STATIC CHARACTERISTIC Collector−emitter breakdown voltage, gate−emitter short−circuited Collector−emitter saturation voltage Gate−emitter threshold voltage DYNAMIC CHARACTERISTIC Input capacitance Output capacitance VCE = 20 V, VGE = 0 V, f = 1 MHz Reverse transfer capacitance Gate charge total Gate to emitter charge VCE = 600 V, IC = 40 A, VGE = 15 V Gate to collector charge nC SWITCHING CHARACTERISTIC, INDUCTIVE LOAD Turn-on delay time Rise time Turn-off delay time Fall time Turn-on switching loss TJ = 25°C VCC = 600 V, IC = 40 A Rg = 10 W VGE = 0 V/ 15 V Turn-off switching loss Turn-on delay time Rise time Turn-off delay time Fall time Turn-on switching loss TJ = 125°C VCC = 600 V, IC = 40 A Rg = 10 W VGE = 0 V/ 15 V Turn-off switching loss tf − 132 − Eon − 5.5 − Eoff − 1.40 − td(on) − 134 − tr − 44 − td(off) − 380 − tf − 185 − Eon − 6.8 − Eoff − 2.6 − VF − − ns mJ ns mJ DIODE CHARACTERISTIC Forward voltage VGE = 0 V, IF = 40 A VGE = 0 V, IF = 40 A, TJ = 150°C http://onsemi.com 2 1.6 1.8 1.8 − V NGTB40N120LWG TYPICAL CHARACTERISTICS TJ = 25°C 10 V 120 100 80 9V 60 40 20 8V 7V 0 1 2 4 5 9V 60 8V 40 20 7V 0 1 2 4 Figure 2. Output Characteristics 100 80 60 9V 40 7V 20 8V 0 1 2 5 160 10 V TJ = −40°C 3 4 140 120 100 80 60 TJ = 150°C 40 TJ = 25°C 20 0 5 0 4 8 12 VCE, COLLECTOR−EMITTER VOLTAGE (V) VGE, GATE−EMITTER VOLTAGE (V) Figure 3. Output Characteristics Figure 4. Typical Transfer Characteristics 100,000 3.5 IC = 80 A 3.0 Cies 10,000 2.5 IC = 40 A 2.0 1.5 IC = 10 A 1.0 IC = 5 A 1000 Coes 100 Cres 0.5 0 −50 3 Figure 1. Output Characteristics 140 0 80 VCE, COLLECTOR−EMITTER VOLTAGE (V) VGE = 20 to 11 V 120 10 V 100 VCE, COLLECTOR−EMITTER VOLTAGE (V) 160 IC, COLLECTOR CURRENT (A) 3 VGE = 20 to 13 V TJ = 150°C 120 0 IC, COLLECTOR CURRENT (A) 0 VCE, COLLECTOR−EMITTER VOLTAGE (V) IC, COLLECTOR CURRENT (A) 140 140 VGE = 20 to 11 V CAPACITANCE (pF) IC, COLLECTOR CURRENT (A) 160 −20 10 40 70 100 130 10 160 0 20 40 60 80 100 120 140 160 180 200 TJ, JUNCTION TEMPERATURE (°C) VCE, COLLECTOR−EMITTER VOLTAGE (V) Figure 5. VCE(sat) vs. TJ Figure 6. Typical Capacitance http://onsemi.com 3 NGTB40N120LWG TYPICAL CHARACTERISTICS 20 120 VGE, GATE−EMITTER VOLTAGE (V) IF, FORWARD CURRENT (A) 140 TJ = 25°C 100 TJ = 150°C 80 60 40 20 0 0 0.5 1.0 2.0 1.5 3.0 2.5 10 5 0 0 180 240 300 360 Figure 7. Diode Forward Characteristics Figure 8. Typical Gate Charge 480 td(off) SWITCHING TIME (ns) Eon 6 5 VCE = 600 V VGE = 15 V IC = 40 A Rg = 10 W 4 3 Eoff 2 20 40 60 80 tf td(on) 100 tr 10 VCE = 600 V VGE = 15 V IC = 40 A Rg = 10 W 8 120 140 1 160 0 20 40 60 80 100 140 160 TJ, JUNCTION TEMPERATURE (°C) Figure 9. Switching Loss vs. Temperature Figure 10. Switching Time vs. Temperature 1000 td(off) Eon 6 4 Eoff tf td(on) 100 tr 10 VCE = 600 V VGE = 15 V TJ = 150°C Rg = 10 W 2 16 120 TJ, JUNCTION TEMPERATURE (°C) VCE = 600 V VGE = 15 V TJ = 150°C Rg = 10 W 10 100 SWITCHING TIME (ns) 0 12 0 420 1000 1 SWITCHING LOSS (mJ) 120 QG, GATE CHARGE (nC) 7 0 60 VF, FORWARD VOLTAGE (V) 8 SWITCHING LOSS (mJ) VCE = 600 V 15 24 32 40 48 56 1 64 16 24 32 40 48 56 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 11. Switching Loss vs. IC Figure 12. Switching Time vs. IC http://onsemi.com 4 64 NGTB40N120LWG TYPICAL CHARACTERISTICS 15 SWITCHING LOSS (mJ) 10,000 VCE = 600 V VGE = 15 V IC = 40 A TJ = 150°C 12 Eon SWITCHING TIME (ns) 18 9 6 Eoff td(off) 1000 tf td(on) 100 tr VCE = 600 V VGE = 15 V IC = 40 A TJ = 150°C 10 3 0 5 15 25 35 45 55 65 75 1 85 15 55 65 Figure 13. Switching Loss vs. Rg Figure 14. Switching Time vs. Rg 75 85 725 775 td(off) SWITCHING TIME (ns) Eon 6 4 Eoff tf td(on) 100 tr 10 VGE = 15 V IC = 40 A Rg = 10 W TJ = 150°C 2 375 425 475 525 575 625 675 725 1 775 375 425 475 525 575 625 675 VCE, COLLECTOR−EMITTER VOLTAGE (V) VCE, COLLECTOR−EMITTER VOLTAGE (V) Figure 15. Switching Loss vs. VCE Figure 16. Switching Time vs. VCE 1000 100 ms 100 IC, COLLECTOR CURRENT (A) 1000 IC, COLLECTOR CURRENT (A) 45 Rg, GATE RESISTOR (W) VGE = 15 V IC = 40 A Rg = 10 W TJ = 150°C 8 50 ms 1 ms 10 dc operation 1 Single Nonrepetitive Pulse TC = 25°C Curves must be derated linearly with increase in temperature 0.1 0.01 35 1000 10 0 25 Rg, GATE RESISTOR (W) 12 SWITCHING LOSS (mJ) 5 1 10 100 100 10 VGE = 15 V, TC = 125°C 1 1000 1 10 100 1000 VCE, COLLECTOR−EMITTER VOLTAGE (V) VCE, COLLECTOR−EMITTER VOLTAGE (V) Figure 17. Safe Operating Area Figure 18. Reverse Bias Safe Operating Area http://onsemi.com 5 NGTB40N120LWG TYPICAL CHARACTERISTICS 1 R(t) (°C/W) 50% Duty Cycle 0.1 RqJC = 0.48 20% 10% R1 Junction 5% 0.01 R2 1% 0.000001 Case Ci = ti/Ri 2% C1 0.00001 Cn C2 Duty Factor = t1/t2 Peak TJ = PDM x ZqJC + TC Single Pulse 0.001 Rn 0.0001 0.001 0.01 0.1 1 10 Ri (°C/W) ti (sec) 0.01616 0.04030 0.060 0.090 0.176 0.093 1.0E−4 1.76E−4 0.002 0.03 0.1 2.0 100 1000 PULSE TIME (sec) Figure 19. IGBT Transient Thermal Impedance 10 R(t) (°C/W) 1 RqJC = 1.5 50% Duty Cycle 20% 10% 0.1 5% 2% 1% R1 Junction C1 Case 0.00001 Cn C2 Ri (°C/W) ti (sec) 0.19655 0.414 0.5 0.345 0.0934 1.48E−4 0.002 0.03 0.1 2.0 Duty Factor = t1/t2 Peak TJ = PDM x ZqJC + TC Single Pulse 0.000001 Rn Ci = ti/Ri 0.01 0.001 R2 0.0001 0.001 0.01 0.1 1 PULSE TIME (sec) Figure 20. Diode Transient Thermal Impedance Figure 21. Test Circuit for Switching Characteristics http://onsemi.com 6 10 100 1000 NGTB40N120LWG Figure 22. Definition of Turn On Waveform http://onsemi.com 7 NGTB40N120LWG Figure 23. Definition of Turn Off Waveform http://onsemi.com 8 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−247 CASE 340L ISSUE G DATE 06 OCT 2021 SCALE 1:1 GENERIC MARKING DIAGRAM* XXXXXXXXX AYWWG STYLE 1: PIN 1. 2. 3. 4. GATE DRAIN SOURCE DRAIN STYLE 2: PIN 1. 2. 3. 4. ANODE CATHODE (S) ANODE 2 CATHODES (S) STYLE 5: PIN 1. 2. 3. 4. CATHODE ANODE GATE ANODE STYLE 6: PIN 1. 2. 3. 4. MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2 DOCUMENT NUMBER: DESCRIPTION: STYLE 3: PIN 1. 2. 3. 4. 98ASB15080C TO−247 BASE COLLECTOR EMITTER COLLECTOR STYLE 4: PIN 1. 2. 3. 4. GATE COLLECTOR EMITTER COLLECTOR XXXXX A Y WW G = Specific Device Code = Assembly Location = Year = Work Week = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2021 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative