DATA SHEET
www.onsemi.com
IGBT
NGTB75N65FL2WG
75 A, 650 V
VCEsat = 1.70 V
Eoff = 1.0 mJ
This Insulated Gate Bipolar Transistor (IGBT) features a robust and
cost effective Field Stop (FS) Trench construction, and provides
superior performance in demanding switching applications, offering
both low on state voltage and minimal switching loss.
C
Features
•
•
•
•
•
•
Extremely Efficient Trench with Field Stop Technology
TJmax = 175°C
Soft Fast Reverse Recovery Diode
Optimized for High Speed Switching
5 ms Short−Circuit Capability
These are Pb−Free Devices
G
E
Typical Applications
• Solar Inverters
• Uninterruptible Power Supplies (UPS)
• Welding
G
C
E
TO−247
CASE 340AM
ABSOLUTE MAXIMUM RATINGS
Symbol
Value
Unit
Collector−emitter Voltage
Rating
VCES
650
V
Collector Current
@ TC = 25°C
@ TC = 100°C
IC
Diode Forward Current
@ TC = 25°C
@ TC = 100°C
IF
A
100
75
75N65FL2
AYWWG
A
100
75
Diode Pulsed Current
TPULSE Limited by TJ Max
IFM
200
A
Pulsed Collector Current, Tpulse
Limited by TJmax
ICM
200
A
Short−circuit Withstand Time
VGE = 15 V, VCE = 400 V,
TJ ≤ +150°C
tSC
5
ms
Gate−emitter Voltage
VGE
±20
V
V
Transient Gate−emitter Voltage
(TPULSE = 5 ms, D < 0.10)
MARKING DIAGRAM
±30
Power Dissipation
@ TC = 25°C
@ TC = 100°C
PD
W
Operating Junction Temperature
Range
TJ
−55 to +175
°C
Storage Temperature Range
Tstg
−55 to +175
°C
Lead temperature for soldering, 1/8″
from case for 5 seconds
TSLD
260
°C
595
265
75N65FL2 = Specific Device Code
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
NGTB75N65FL2WG
Package
Shipping
TO−247
(Pb−Free)
30 Units / Rail
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
© Semiconductor Components Industries, LLC, 2015
October, 2021 − Rev. 6
1
Publication Order Number:
NGTB75N65FL2W/D
NGTB75N65FL2WG
THERMAL CHARACTERISTICS
Symbol
Value
Unit
Thermal resistance junction−to−case, for IGBT
Rating
RqJC
0.28
°C/W
Thermal resistance junction−to−case, for Diode
RqJC
0.62
°C/W
Thermal resistance junction−to−ambient
RqJA
40
°C/W
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
VGE = 0 V, IC = 500 mA
V(BR)CES
650
−
−
V
VGE = 15 V, IC = 75 A
VGE = 15 V, IC = 75 A, TJ = 175°C
VCEsat
1.50
−
1.75
2.30
2.00
−
V
STATIC CHARACTERISTIC
Collector−emitter breakdown voltage,
gate−emitter short−circuited
Collector−emitter saturation voltage
Gate−emitter threshold voltage
VGE = VCE, IC = 350 mA
VGE(th)
4.5
5.5
6.5
V
Collector−emitter cut−off current, gate−
emitter short−circuited
VGE = 0 V, VCE = 650 V
VGE = 0 V, VCE = 650 V, TJ = 175°C
ICES
−
−
−
−
0.1
4.0
mA
Gate leakage current, collector−emitter
short−circuited
VGE = 20 V , VCE = 0 V
IGES
−
−
200
nA
Cies
−
7500
−
pF
VCE = 20 V, VGE = 0 V, f = 1 MHz
Coes
−
300
−
Cres
−
190
−
DYNAMIC CHARACTERISTIC
Input capacitance
Output capacitance
Reverse transfer capacitance
Gate charge total
Gate to emitter charge
VCE = 480 V, IC = 50 A, VGE = 15 V
Gate to collector charge
Qg
−
310
−
Qge
−
60
−
Qgc
−
150
−
td(on)
−
110
−
tr
−
48
−
td(off)
−
270
−
nC
SWITCHING CHARACTERISTIC, INDUCTIVE LOAD
Turn−on delay time
Rise time
Turn−off delay time
Fall time
TJ = 25°C
VCC = 400 V, IC = 75 A
Rg = 10 W
VGE = 0 V/ 15 V
tf
−
70
−
Eon
−
2.2
−
Eoff
−
1.1
−
Total switching loss
Ets
−
3.3
−
Turn−on delay time
td(on)
−
100
−
tr
−
50
−
td(off)
−
280
−
tf
−
100
−
Turn−on switching loss
Turn−off switching loss
Rise time
Turn−off delay time
Fall time
Turn−on switching loss
TJ = 150°C
VCC = 400 V, IC = 75 A
Rg = 10 W
VGE = 0 V/ 15 V
ns
mJ
ns
Eon
−
2.8
−
Turn−off switching loss
Eoff
−
1.6
−
Total switching loss
Ets
−
4.4
−
VF
1.50
−
2.20
2.40
2.90
−
V
trr
−
80
−
ns
mC
mJ
DIODE CHARACTERISTIC
Forward voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
VGE = 0 V, IF = 75 A
VGE = 0 V, IF = 75 A, TJ = 175°C
TJ = 25°C
IF = 75 A, VR = 400 V
diF/dt = 200 A/ms
TJ = 175°C
IF = 75 A, VR = 400 V
diF/dt = 200 A/ms
Qrr
−
0.40
−
Irrm
−
8
−
A
trr
−
143
−
ns
Qrr
−
1.45
−
mC
Irrm
−
16
−
A
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
2
NGTB75N65FL2WG
TYPICAL CHARACTERISTICS
IC, COLLECTOR CURRENT (A)
140
11 V
120
100
10 V
80
60
40
9V
20
8V
7V
7
1
2
3
4
5
140
TJ = 150°C
120
11 V
100
10 V
80
60
9V
40
8V
7V
20
0
1
2
3
4
5
7
6
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 1. Output Characteristics
Figure 2. Output Characteristics
TJ = −55°C
11 V
140
120
100
10 V
80
60
7V
40
9V
20
0
8V
1
2
3
4
5
6
7
140
120
100
80
60
40
TJ = 150°C
20
TJ = 25°C
0
8
0
1
2
3
4
5
6
7
8
9
10 11 12 13
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VGE, GATE−EMITTER VOLTAGE (V)
Figure 3. Output Characteristics
Figure 4. Typical Transfer Characteristics
2.50
100,000
TJ = 25°C
IC = 75 A
2.00
IC = 50 A
1.50
IC = 25 A
1.00
0.50
0
−75 −50 −25
8
160
160
0
13 V
160
0
8
VGE = 20 V
to 15 V
180
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VGE = 20 V
to 13 V
180
6
IC, COLLECTOR CURRENT (A)
0
200
IC, COLLECTOR CURRENT (A)
TJ = 25°C
160
0
VCE, COLLECTOR−EMITTER VOLTAGE (V)
200
VGE = 20 V
to 13 V
180
C, CAPACITANCE (pF)
IC, COLLECTOR CURRENT (A)
200
0
25
50
1000
Coes
100
Cres
10
1
75 100 125 150 175 200
Cies
10,000
0
10
20
30
40
50
60
70
80
90 100
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 5. VCE(sat) vs. TJ
Figure 6. Typical Capacitance
www.onsemi.com
3
NGTB75N65FL2WG
TYPICAL CHARACTERISTICS
16
VGE, GATE−EMITTER VOLTAGE (V)
IF, FORWARD CURRENT (A)
70
60
50
40
30
20
TJ = 150°C
10
0
TJ = 25°C
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
8
6
4
VCE = 400 V
VGE = 15 V
IC = 75 A
2
0
0
50
100
250
200
150
QG, GATE CHARGE (nC)
350
1000
SWITCHING TIME (ns)
Eon
2.0
Eoff
1.5
1.0
VCE = 400 V
VGE = 15 V
IC = 75 A
Rg = 10 W
0.5
0
6
20
40
60
80
100
120
4
140
td(off)
td(on)
100
tr
10
160
tf
0
VCE = 400 V
VGE = 15 V
IC = 75 A
Rg = 10 W
20
40
60
80
100
140
TJ, JUNCTION TEMPERATURE (°C)
Figure 9. Switching Loss vs. Temperature
Figure 10. Switching Time vs. Temperature
Eon
Eoff
2
td(off)
tf
100
td(on)
tr
VCE = 400 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
1
25
35
160
1000
3
15
120
TJ, JUNCTION TEMPERATURE (°C)
VCE = 400 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
5
0
300
Figure 8. Typical Gate Charge
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
10
VF, FORWARD VOLTAGE (V)
2.5
SWITCHING LOSS (mJ)
12
Figure 7. Diode Forward Characteristics
3.0
0
VCE = 400 V
14
45
55
65
75
85
95
10
105
15
25
35
45
55
65
75
85
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 11. Switching Loss vs. IC
Figure 12. Switching Time vs. IC
www.onsemi.com
4
95
105
NGTB75N65FL2WG
TYPICAL CHARACTERISTICS
10,000
VCE = 400 V
VGE = 15 V
TJ = 150°C
IC = 75 A
SWITCHING LOSS (mJ)
12
10
SWITCHING TIME (ns)
14
Eon
8
6
Eoff
4
VCE = 400 V
VGE = 15 V
TJ = 150°C
IC = 75 A
1000
td(off)
td(on)
tr
tf
100
2
0
5
15
25
35
45
55
65
75
10
85
35
45
55
65
75
Rg, GATE RESISTOR (W)
Figure 14. Switching Time vs. Rg
85
1000
5
Eon
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
25
Rg, GATE RESISTOR (W)
4
3
Eoff
2
VGE = 15 V
TJ = 150°C
IC = 75 A
Rg = 10 W
1
0
150 200 250 300
350 400
td(off)
td(on)
100
10
450 500 550 600 650
tf
tr
VGE = 15 V
TJ = 150°C
IC = 75 A
Rg = 10 W
150 200 250 300 350 400 450 500 550 600 650
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 15. Switching Loss vs. VCE
Figure 16. Switching Time vs. VCE
1000
1000
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
15
Figure 13. Switching Loss vs. Rg
6
100
50 ms
dc operation
10
100 ms
Single Nonrepetitive
Pulse TC = 25°C
Curves must be derated
linearly with increase
in temperature
1
0.1
5
1
10
1 ms
100
100
10
1
1000
VGE = 15 V, TC = 150°C
1
10
100
1000
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 17. Safe Operating Area
Figure 18. Reverse Bias Safe Operating Area
www.onsemi.com
5
NGTB75N65FL2WG
TYPICAL CHARACTERISTICS
Irm, REVERSE RECOVERY CURRENT (A)
Qrr, REVERSE RECOVERY CHARGE (mC)
130
TJ = 175°C, IF = 75 A
110
90
TJ = 25°C, IF = 75 A
70
50
100
300
500
700
900
1100
1300
TJ = 175°C, IF = 75 A
2.5
2.0
1.5
TJ = 25°C, IF = 75 A
1.0
0.5
0
100
300
500
700
900
1100
diF/dt, DIODE CURRENT SLOPE (A/m)
diF/dt, DIODE CURRENT SLOPE (A/m)
Figure 20. Qrr vs. diF/dt (VR = 400 V)
50
1300
3.5
TJ = 175°C, IF = 75 A
40
30
20
TJ = 25°C, IF = 75 A
10
0
3.0
Figure 19. trr vs. diF/dt (VR = 400 V)
VF, FORWARD VOLTAGE (V)
trr, REVERSE RECOVERY TIME (ns)
150
100
300
500
700
900
1100
3.0
IF = 75 A
2.5
IF = 50 A
2.0
IF = 25 A
1.5
1.0
−75 −50 −25
1300
0
25
50
75 100 125 150 175 200
diF/dt, DIODE CURRENT SLOPE (A/m)
TJ, JUNCTION TEMPERATURE (°C)
Figure 21. Irm vs. diF/dt (VR = 400 V)
Figure 22. VF vs. TJ
www.onsemi.com
6
NGTB75N65FL2WG
TYPICAL CHARACTERISTICS
SQUARE−WAVE PEAK R(t) (°C/W)
1
RqJC = 0.282
50% Duty Cycle
0.1 20%
10%
5%
0.01 2%
R1
Junction
C1
0.001
0.0001
R2
Case
Ri (°C/W)
Ci (J/°C)
0.0270
0.0243
0.0225
0.0554
0.1121
0.0409
0.0037
0.0130
0.0445
0.0571
0.0892
0.7725
Cn
C2
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
Single Pulse
0.000001
Rn
0.00001
0.001
0.0001
0.01
0.1
1
ON−PULSE WIDTH (s)
Figure 23. IGBT Transient Thermal Impedance
SQUARE−WAVE PEAK R(t) (°C/W)
1
50% Duty Cycle
RqJC = 0.622
20%
0.1 10%
5%
Junction R1
R2
Rn
C1
C2
Cn
Case
2%
0.01
Single Pulse
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
0.001
0.000001
0.00001
0.0001
0.001
0.01
ON−PULSE WIDTH (s)
Figure 24. Diode Transient Thermal Impedance
www.onsemi.com
7
0.1
Ri (°C/W)
Ci (J/°C)
0.006394
0.007900
0.008527
0.025491
0.022800
0.121738
0.363338
0.000156
0.001266
0.003708
0.003923
0.013870
0.008214
0.275226
1
NGTB75N65FL2WG
Figure 25. Test Circuit for Switching Characteristics
www.onsemi.com
8
NGTB75N65FL2WG
Figure 26. Definition of Turn On Waveform
www.onsemi.com
9
NGTB75N65FL2WG
Figure 27. Definition of Turn Off Waveform
www.onsemi.com
10
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−247
CASE 340AM
ISSUE C
DATE 07 SEP 2021
GENERIC
MARKING DIAGRAMS*
XXXXXXXXX
AYWWG
XXXXXXXXX
XXXXXXXXX
AYWWG
XXXX
A
Y
WW
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
DOCUMENT NUMBER:
DESCRIPTION:
98AON77284F
TO−247
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2018
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative