NJVNJD2873T4G

NJD2873 Power Transistors NPN Silicon DPAK For Surface Mount Applications Designed for high−gain audio amplifier applications. www.onsemi.com Features • • • • • • High DC Current Gain Low Collector−Emitter Saturation Voltage High Current−Gain − Bandwidth Product Epoxy Meets UL 94 V−0 @ 0.125 in NJV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS Rating Symbol Value Unit VCB 50 Vdc VCEO 50 Vdc VEB 5 Vdc IC 2 Adc ICM 3 Adc Base Current IB 0.4 Adc Total Device Dissipation @ TC = 25°C Derate above 25°C PD 15 0.1 W W/°C Total Device Dissipation @ TA = 25°C* Derate above 25°C PD 1.68 0.011 W W/°C TJ, Tstg −65 to +175 °C ESD − Human Body Model HBM 3B V ESD − Machine Model MM C V Collector−Base Voltage Collector−Emitter Voltage Emitter−Base Voltage Collector Current − Continuous Collector Current − Peak Operating and Storage Junction Temperature Range SILICON POWER TRANSISTORS 2 AMPERES 50 VOLTS 15 WATTS COLLECTOR 2,4 1 BASE 3 EMITTER 4 1 2 3 DPAK CASE 369C STYLE 1 MARKING DIAGRAM Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. AYWW J 2873G A Y WW G = Assembly Location = Year = Work Week = Pb−Free Device ORDERING INFORMATION Package Shipping† NJD2873T4G DPAK (Pb−Free) 2,500 Units / Reel NJVNJD2873T4G DPAK (Pb−Free) 2,500 Units / Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2017 January, 2017 − Rev. 18 1 Publication Order Number: NJD2873T4/D NJD2873 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit °C/W Thermal Resistance Junction−to−Case Junction−to−Ambient (Note 1) RqJC RqJA 10 89.3 1. These ratings are applicable when surface mounted on the minimum pad sizes recommended. ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Max 50 − − 100 − 100 120 40 80 360 − 360 − 0.3 − 1.2 − − 1.2 0.95 65 − − 80 Unit OFF CHARACTERISTICS Collector−Emitter Sustaining Voltage (Note 2) (IC = 10 mAdc, IB = 0) VCEO(sus) Collector Cutoff Current (VCB = 50 Vdc, IE = 0) ICBO Emitter Cutoff Current (VBE = 5 Vdc, IC = 0) IEBO Vdc nAdc nAdc ON CHARACTERISTICS DC Current Gain (Note 2) (IC = 0.5 A, VCE = 2 V) (IC = 2 Adc, VCE = 2 Vdc) (IC = 0.75 Adc, VCE = 1.6 Vdc, −40°C ≤ TJ ≤ 150°C) hFE Collector−Emitter Saturation Voltage (Note 2) (IC = 1 A, IB = 0.05 A) VCE(sat) Base−Emitter Saturation Voltage (Note 2) (IC = 1 A, IB = 0.05 Adc) VBE(sat) Base−Emitter On Voltage (Note 2) (IC = 1 Adc, VCE = 2 Vdc) (IC = 0.75 Adc, VCE = 1.6 Vdc, −40°C ≤ TJ ≤ 150°C) VBE(on) − Vdc Vdc Vdc DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (Note 3) (IC = 100 mAdc, VCE = 10 Vdc, ftest = 10 MHz) fT Output Capacitance (VCB = 10 Vdc, IE = 0, f = 0.1 MHz) MHz Cob pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle [ 2%. 3. fT = ⎪hfe⎪• ftest. www.onsemi.com 2 NJD2873 TYPICAL CHARACTERISTICS PD , POWER DISSIPATION (WATTS) 25 20 15 10 5 0 25 0 50 75 100 125 150 175 200 T, TEMPERATURE (°C) Figure 1. Power Derating 1000 0.4 10 0.01 25°C VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 100°C 100 VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) VCE = 2.0 V −40°C 0.6 0.5 100°C 150°C 0.4 0.3 Ic/Ib = 20 175°C 0.2 0.01 0.2 0.1 Ic/Ib = 20 Figure 3. Collector−Emitter Saturation Voltage 0.9 25°C 25°C −40°C Figure 2. DC Current Gain 1.0 0.7 100°C 0 0.01 10 1.1 −40°C 150°C 0.3 IC, COLLECTOR CURRENT (AMPS) 1 1.2 0.8 175°C 0.1 1 IC, COLLECTOR CURRENT (AMPS) 0.1 VBE(on), BASE−EMITTER VOLTAGE (V) hFE, DC CURRENT GAIN 175°C 150°C 0.1 1 10 10 1.2 1.1 VCE = 2.0 V −40°C 1.0 25°C 0.9 100°C 150°C 175°C 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.01 0.1 1 IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMPS) Figure 4. Base−Emitter Saturation Voltage Figure 5. Base−Emitter Voltage www.onsemi.com 3 10 NJD2873 1000 500 mA TA = 25°C TA = 25°C Cibo 0.8 C, CAPACITANCE (pF) VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 1.0 10 mA 0.6 1A IC = 2 A 100 mA 0.4 0.2 0.01 10 0.1 1 100 10 1000 0.1 1 10 IB, BASE CURRENT (mA) VR, REVERSE VOLTAGE (V) Figure 6. Saturation Region Figure 7. Capacitance 100 10000 100 VCE = 10 V TA = 25°C IC, COLLECTOR CURRENT ftau, CURRENT GAIN BANDWIDTH PRODUCT (MHz) Cobo 1 0 1 mS 1000 100 10 mS 100 mS 1S 100 10 1 0 1 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 100 10 10 100 Figure 9. Capacitance 0.2 0.2 0.1 0.01 0.02 1 Figure 8. Saturation Region 0.3 0.02 10000 VCE, COLLECTOR EMITTER VOLTAGE (V) D = 0.5 0.03 1000 IC, COLLECTOR CURRENT (mA) 1 0.7 0.5 0.1 0.07 0.05 100 RqJC(t) = r(t) qJC RqJC = 10°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) qJC(t) 0.05 0.02 0.01 P(pk) t1 t2 DUTY CYCLE, D = t1/t2 0 (SINGLE PULSE) 0.05 0.1 0.2 0.5 1 2 t, TIME (ms) 5 Figure 10. Thermal Response www.onsemi.com 4 10 20 50 100 200 NJD2873 PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. 7. OPTIONAL MOLD FEATURE. A E C A b3 B c2 4 L3 Z D 1 2 H DETAIL A 3 L4 NOTE 7 c SIDE VIEW b2 e b TOP VIEW 0.005 (0.13) M C Z H L2 GAUGE PLANE C L L1 DETAIL A DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z BOTTOM VIEW Z SEATING PLANE BOTTOM VIEW A1 ALTERNATE CONSTRUCTIONS ROTATED 905 CW 2.58 0.102 5.80 0.228 3.00 0.118 1.60 0.063 MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.72 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.90 REF 0.51 BSC 0.89 1.27 −−− 1.01 3.93 −−− STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR SOLDERING FOOTPRINT* 6.20 0.244 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.028 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.114 REF 0.020 BSC 0.035 0.050 −−− 0.040 0.155 −−− 6.17 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ◊ N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NJD2873T4/D