NL17SHT08
2-Input AND Gate /
CMOS Logic Level Shifter
The NL17SHT08 is an advanced high speed CMOS 2−input AND
gate fabricated with silicon gate CMOS technology. It achieves high
speed operation similar to equivalent Bipolar Schottky TTL while
maintaining CMOS low power dissipation.
The internal circuit is composed of three stages, including a buffer
output which provides high noise immunity and stable output.
The device input is compatible with TTL−type input thresholds and
the output has a full 5 V CMOS level output swing. The input protection
circuitry on this device allows overvoltage tolerance on the input,
allowing the device to be used as a logic−level translator from 3 V
CMOS logic to 5 V CMOS Logic or from 1.8 V CMOS logic to 3 V
CMOS Logic while operating at the high−voltage power supply.
The NL17SHT08 input structure provides protection when voltages
up to 7 V are applied, regardless of the supply voltage. This allows the
NL17SHT08 to be used to interface 5 V circuits to 3 V circuits. The
output structures also provide protection when VCC = 0 V. These input
and output structures help prevent device destruction caused by supply
voltage − input/output voltage mismatch, battery backup, hot
insertion, etc.
Features
•
•
•
•
•
•
•
•
High Speed: tPD = 3.5 ns (Typ) at VCC = 5 V
Low Power Dissipation: ICC = 1 mA (Max) at TA = 25°C
TTL−Compatible Inputs: VIL = 0.8 V; VIH = 2 V
CMOS−Compatible Outputs: VOH > 0.8 VCC; VOL < 0.1 VCC @Load
Power Down Protection Provided on Inputs and Outputs
Balanced Propagation Delays
Pin and Function Compatible with Other Standard Logic Families
These are Pb−Free Devices
IN A
1
GND
2
IN B
3
5
VCC
http://onsemi.com
MARKING
DIAGRAM
SOT−953
CASE 527AE
P
M
PM
1
= Specific Device Code
= Month Code
PIN ASSIGNMENT
1
IN A
2
GND
3
IN B
4
OUT Y
5
VCC
FUNCTION TABLE
Inputs
Output
A
B
Y
L
L
H
H
L
H
L
H
L
L
L
H
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
4
OUT Y
Figure 1. Pinout (Top View)
IN A
IN B
&
OUT Y
Figure 2. Logic Symbol
© Semiconductor Components Industries, LLC, 2011
August, 2011 − Rev. 0
1
Publication Order Number:
NL17SHT08/D
NL17SHT08
MAXIMUM RATINGS
Symbol
Characteristics
Value
Unit
VCC
DC Supply Voltage
−0.5 to +7.0
V
VIN
DC Input Voltage
−0.5 to +7.0
V
−0.5 to 7.0
−0.5 to VCC + 0.5
V
−20
mA
±20
mA
VOUT
DC Output Voltage
VCC = 0
High or Low State
IIK
Input Diode Current
IOK
Output Diode Current
IOUT
DC Output Current
±25
mA
ICC
DC Supply Current, VCC and GND
50
mA
PD
Power dissipation in still air
50
mW
TL
Lead temperature, 1 mm from case for 10 s
260
°C
TJ
Junction temperature under bias
+150
°C
Tstg
Storage temperature
−65 to +150
°C
ILatchup
Latchup Performance
±100
mA
VOUT < GND; VOUT > VCC
Above VCC and Below GND at 125°C (Note 1)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Tested to EIA/JESD78
RECOMMENDED OPERATING CONDITIONS
Symbol
Characteristics
Min
Max
Unit
VCC
DC Supply Voltage
3.0
5.5
V
VIN
DC Input Voltage
0.0
5.5
V
0.0
0.0
5.5
VCC
V
−55
+125
°C
0
0
100
20
ns/V
VOUT
DC Output Voltage
TA
VCC = 0
High or Low State
Operating Temperature Range
tr , tf
Input Rise and Fall Time
VCC = 3.3 V ± 0.3 V
VCC = 5.0 V ± 0.5 V
90
419,300
47.9
100
178,700
20.4
110
79,600
9.4
120
37,000
4.2
130
17,800
2.0
140
8,900
1.0
TJ = 80 ° C
117.8
TJ = 90 ° C
1,032,200
TJ = 100 ° C
80
FAILURE RATE OF PLASTIC = CERAMIC
UNTIL INTERMETALLICS OCCUR
TJ = 110° C
Time, Years
TJ = 120° C
Time, Hours
TJ = 130 ° C
Junction
Temperature °C
NORMALIZED FAILURE RATE
Device Junction Temperature versus
Time to 0.1% Bond Failures
1
1
10
100
1000
TIME, YEARS
Figure 3. Failure Rate vs. Time Junction Temperature
http://onsemi.com
2
NL17SHT08
DC ELECTRICAL CHARACTERISTICS
Symbol
Parameter
Test Conditions
Min
1.4
2.0
2.0
VIH
Minimum High−Level
Input Voltage
3.0
4.5
5.5
VIL
Maximum Low−Level
Input Voltage
3.0
4.5
5.5
VOH
Minimum High−Level
Output Voltage
VIN = VIH or VIL
VOL
Maximum Low−Level
Output Voltage
VIN = VIH or VIL
TA = 25°C
VCC
(V)
Typ
TA ≤ 85°C
Max
Min
1.4
2.0
2.0
0.53
0.8
0.8
VIN = VIH or VIL
IOH = −50 mA
3.0
4.5
2.9
4.4
VIN = VIH or VIL
IOH = −4 mA
IOH = −8 mA
3.0
4.5
2.58
3.94
VIN = VIH or VIL
IOL = 50 mA
3.0
4.5
VIN = VIH or VIL
IOL = 4 mA
IOL = 8 mA
Max
3.0
4.5
0.0
0.0
−55 ≤ TA ≤ 125°C
Min
Max
1.4
2.0
2.0
0.53
0.8
0.8
V
0.53
0.8
0.8
2.9
4.4
2.9
4.4
2.48
3.80
2.34
3.66
Unit
V
V
V
0.1
0.1
0.1
0.1
0.1
0.1
3.0
4.5
0.36
0.36
0.44
0.44
0.52
0.52
V
V
IIN
Maximum Input
Leakage Current
VIN = 5.5 V or GND
0 to
5.5
±0.1
±1.0
±1.0
mA
ICC
Maximum Quiescent
Supply Current
VIN = VCC or GND
5.5
1.0
20
40
mA
ICCT
Quiescent Supply
Current
Input: VIN = 3.4 V
5.5
1.35
1.50
1.65
mA
IOPD
Output Leakage
Current
VOUT = 5.5 V
0.0
0.5
5.0
10
mA
AC ELECTRICAL CHARACTERISTICS Cload = 50 pF, Input tr = tf = 3.0 ns
TA = 25°C
Symbol
tPLH,
tPHL
CIN
Parameter
Maximum Propagation
Delay, Input A or B to Y
Min
Test Conditions
TA ≤ 85°C
Typ
Max
Min
Max
−55 ≤ TA ≤ 125°C
Min
Max
Unit
ns
VCC = 3.3 ± 0.3 V
CL = 15 pF
CL = 50 pF
4.1
5.9
8.8
12.3
10.5
14.0
12.5
16.5
VCC = 5.0 ± 0.5 V
CL = 15 pF
CL = 50 pF
3.5
4.2
5.9
7.9
7.0
9.0
9.0
11.0
5.5
10
10
10
Maximum Input Capacitance
pF
Typical @ 25°C, VCC = 5.0 V
11
CPD
Power Dissipation Capacitance (Note 2)
pF
2. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic
power consumption; PD = CPD VCC2 fin + ICC VCC.
http://onsemi.com
3
NL17SHT08
Input A or B
50%
50% VCC
tPLH
GND
tPHL
VOH
Output Y
50% VCC
VOL
Figure 4. Switching Waveforms
TEST POINT
OUTPUT
DEVICE
UNDER
TEST
CL *
*Includes all probe and jig capacitance
Figure 5. Test Circuit
ORDERING INFORMATION
Device
NL17SHT08P5T5G
Package
Shipping†
SOT−953
(Pb−Free)
8000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOT−953
CASE 527AE
ISSUE E
DATE 02 AUG 2011
SCALE 4:1
X
Y
D
5
PIN ONE
INDICATOR
A
4
HE
E
1
2 3
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
FINISH. MINIMUM LEAD THICKNESS IS THE
MINIMUM THICKNESS OF THE BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR GATE BURRS.
DIM
A
b
C
D
E
e
HE
L
L2
L3
C
TOP VIEW
SIDE VIEW
e
L
5X
5X
L3
5X
L2
MILLIMETERS
MIN
NOM
MAX
0.34
0.37
0.40
0.10
0.15
0.20
0.07
0.12
0.17
0.95
1.00
1.05
0.75
0.80
0.85
0.35 BSC
0.95
1.00
1.05
0.175 REF
0.05
0.10
0.15
−−−
−−−
0.15
GENERIC
MARKING DIAGRAM*
5X
BOTTOM VIEW
XM
b
1
0.08 X Y
X
M
SOLDERING FOOTPRINT*
*This information is generic. Please refer
to device data sheet for actual part
marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
5X
0.35
5X
0.20
= Specific Device Code
= Month Code
PACKAGE
OUTLINE
1.20
1
0.35
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98AON26457D
SOT−953
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative