NL17SZ00 Single 2−Input NAND Gate
The NL17SZ00 is a single 2−input NAND Gate in two tiny footprint packages. The device performs much as LCX multi−gate products in speed and drive.
Features
• • • • • • • •
Tiny SOT−353 and SOT−553 Packages 2.7 ns TPD at 5 V (typ) Source/Sink 24 mA at 3.0 V Over−V oltage Tolerant Inputs Pin For Pin with NC7SZ00P5X, TC7SZ00FU and TC7SZ00AFE Chip Complexity: FETs = 20 Designed for 1.65 V to 5.5 V VCC Operation Pb−Free Packages are Available
http://onsemi.com MARKING DIAGRAMS
5 L1 MG G 1
5 1 SOT−353/SC70−5/SC−88A DF SUFFIX CASE 419A
L1 = Specific Device Marking M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) 5
5 L1 M 1
A
1
5
VCC
B
2
1 SOT−553 XV5 SUFFIX CASE 463B L1 M
= Specific Device Marking = Date Code
GND
3
4
Y
PIN ASSIGNMENT
Pin Function A B GND Y VCC
Figure 1. Pinout (Top View)
1 2
A B
3 & Y 4 5
Figure 2. Logic Symbol
FUNCTION TABLE
Output Input A L L H H B L H L H Y = AB Y H H H L
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
November, 2006 − Rev. 5
Publication Order Number: NL17SZ00/D
NL17SZ00
MAXIMUM RATINGS
Symbol VCC VIN VOUT IIK IOK IOUT ICC TSTG TL TJ qJA PD MSL FR ESD DC Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Sink Current DC Supply Current per Supply Pin Storage Temperature Range Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature Under Bias Thermal Resistance Power Dissipation in Still Air at 85°C Moisture Sensitivity Flammability Rating ESD Classification Oxygen Index: 28 to 34 Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) SOT−353 (Note 1) SOT−553 SOT−353 SOT−553 Parameter Value *0.5 to )7.0 *0.5 to )7.0 *0.5 to to VCC + 0.5 *50 *50 $50 $100 *65 to )150 260 )150 350 496 186 135 Level 1 UL 94 V−0 @ 0.125 in Class Z Class A N/A Unit V V V mA mA mA mA °C °C °C °C/W mW
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow. 2. Tested to EIA/JESD22−A114−A, rated to EIA/JESD22−A114−B. 3. Tested to EIA/JESD22−A115−A, rated to EIA/JESD22−A115−A. 4. Tested to JESD22−C101−A.
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VIN VOUT TA tr, tf DC Supply Voltage DC Input Voltage DC Output Voltage Operating Temperature Range Input Rise and Fall Time VCC = 3.0 V $0.3 V VCC = 5.0 V $0.5 V Parameter Min 1.65 0 0 *40 0 0 Max 5.5 5.5 VCC + 0.5 )85 100 20 Unit V V V °C ns/V
http://onsemi.com
2
NL17SZ00
DC ELECTRICAL CHARACTERISTICS
VCC Symbol VIH VIL VOH Parameter High−Level Input Voltage Low−Level Input Voltage High−Level Output Voltage VIN = VIL or VIH IOH = 100 mA IOH = −3 mA IOH = −8 mA IOH = −12 mA IOH = −16 mA IOH = −24 mA IOH = −32 mA Condition (V) 1.65 to 1.95 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 VOL Low−Level Output Voltage VIN = VIH or VOH IOL = 100 mA IOL = 3 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 IIN ICC Input Leakage Current Quiescent Supply Current VIN = VCC or GND VIN = VCC or GND 0 to 5.5 5.5 0.08 0.20 0.22 0.28 0.38 0.42 VCC − 0.1 1.55 1.9 2.2 2.4 2.3 3.8 VCC 1.65 2.1 2.4 2.7 2.5 4.0 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $0.1 1 Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC VCC − 0.1 1.55 1.9 2.2 2.4 2.3 3.8 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $1.0 10 mA mA V TA = 255C Typ Max *405C v TA v 855C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC Max Unit V V V
AC ELECTRICAL CHARACTERISTICS tR = tF = 3.0 ns
VCC Symbol tPLH tPHL Parameter Propagation Delay (Figure 3 and 4) Condition RL = 1 MW, CL = 15 pF RL = 1 MW, CL = 15 pF RL = 1 MW, CL = 15 pF RL = 1 MW, CL = 15 pF RL = 500 W, CL = 50 pF RL = 1 MW, CL = 15 pF RL = 500 W, CL = 50 pF 5.0 $ 0.5 (V) 1.65 1.8 2.5 to 0.2 3.3 $ 0.3 Min 2.0 2.0 0.8 0.5 1.5 0.5 0.8 TA = 255C Typ 5.4 4.5 3.0 2.4 2.4 2.0 2.4 Max 11.4 9.5 6.5 4.5 5.0 3.9 4.3 *405C v TA v 855C Min 2.0 2.0 0.8 0.5 1.5 0.5 0.8 Max 12 10.0 7.0 4.7 5.2 4.1 4.5 Unit ns
CAPACITIVE CHARACTERISTICS
Symbol CIN CPD Input Capacitance Power Dissipation Capacitance (Note 5) Parameter Condition VCC = 5.5 V, VI = 0 V or VCC 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 10 MHz, VCC = 5.5 V, VI = 0 V or VCC Typical u4 25 30 Unit pF pF
5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC.
http://onsemi.com
3
NL17SZ00
tf = 3 ns
90% 90% 50% 10%
tf = 3 ns VCC VCC
INPUT A and B
50% 10%
GND
INPUT RL CL
OUTPUT
tPHL
tPLH VOH
OUTPUT Y
50%
50%
VOL
A 1−MHz square input wave is recommended for propagation delay tests.
Figure 3. Switching Waveform
Figure 4. Test Circuit
DEVICE ORDERING INFORMATION
Device Nomenclature Device Order Number NL17SZ00DFT2 NL17SZ00DFT2G NL17SZ00XV5T2 NL17SZ00XV5T2G Logic Circuit Indicator NL NL NL NL No. of Gates per Package 1 1 1 1 Temp Range Identifier 7 7 7 7 Device Function 00 00 00 00 Package Suffix DF DF XV5 XV5 Tape and Reel Suffix T2 T2 T2 T2 Package Type SOT−353 SOT−353 (Pb−Free) SOT−553* SOT−553* Tape and Reel Size† 178 mm, 3000 Units 178 mm, 3000 Units 178 mm 4000 units 178 mm 4000 units
Technology SZ SZ SZ SZ
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *All Devices in Package SOT553 are Inherently Pb−Free.
http://onsemi.com
4
NL17SZ00
PACKAGE DIMENSIONS
SOT−353 (SC−88A, SC−70) DF SUFFIX CASE 419A−02 ISSUE J
A G
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A−01 OBSOLETE. NEW STANDARD 419A−02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. DIM A B C D G H J K N S INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC −−− 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC −−− 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20
5
4
S
1 2 3
−B−
D 5 PL
0.2 (0.008)
M
B
M
N J C
H
K
SOLDERING FOOTPRINT*
0.50 0.0197
0.65 0.025 0.65 0.025 0.40 0.0157
1.9 0.0748
SCALE 20:1
mm inches
*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
5
NL17SZ00
PACKAGE DIMENSIONS
SOT−553 XV5 SUFFIX CASE 463B−01 ISSUE B
D −X−
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. DIM A b c D E e L HE MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 MIN 0.50 0.17 0.08 1.50 1.10 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MIN 0.020 0.007 0.003 0.059 0.043 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067
A L
4
5
1
2
3
E −Y−
HE
b e
5 PL M
c XY
0.08 (0.003)
SOLDERING FOOTPRINT*
0.3 0.0118 0.45 0.0177 1.0 0.0394
1.35 0.0531
0.5 0.5 0.0197 0.0197
SCALE 20:1 mm inches
*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
6
NL17SZ00/D
