ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
Three-Input AND Gate
NL17SZ11
The NL17SZ11 is a single three−input AND Gate operating from a
1.65 to 5.5 V supply.
Features
•
•
•
•
•
•
•
•
Designed for 1.65 V to 5.5 V VCC Operation
2.9 ns tPD at VCC = 5 V (Typ)
Inputs/Outputs Overvoltage Tolerant up to 5.5 V
IOFF Supports Partial Power Down Protection
Sink 32 mA at 4.5 V
Available in SC−88, SC−74 and UDFN6 Packages
Chip Complexity < 100 FETs
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
www.onsemi.com
MARKING
DIAGRAMS
6
SC−88
CASE 419B−02
1
&
B
1
SC−74
CASE 318F−05
6
A
XXXM G
G
XXX MG
G
1
Y
C
Figure 1. Logic Symbol
1
UDFN6
1.45 x 1.0
CASE 517AQ
UDFN6
1.0 x 1.0
CASE 517BX
XM
XM
1
X, XXX = Specific Device Code
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or position may
vary depending upon manufacturing location.
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2019
September, 2020 − Rev. 1
1
Publication Order Number:
NL17SZ11/D
NL17SZ11
A
1
6
C
GND
2
5
VCC
B
3
4
Y
A
1
6
C
GND
2
5
VCC
B
3
4
Y
SC−88 / SC−74
UDFN6
Figure 2. Pinout (Top View)
PIN ASSIGNMENT
Pin
FUNCTION TABLE (Y = ABC)
Function
Output
Inputs
1
A
A
B
C
Y
2
GND
X
X
L
L
3
B
X
L
X
L
4
Y
L
X
X
L
5
VCC
H
H
H
H
6
C
H = HIGH Logic Level
L = LOW Logic Level
X = Either LOW or HIGH Logic Level
www.onsemi.com
2
NL17SZ11
MAXIMUM RATINGS
Symbol
Value
Unit
VCC
DC Supply Voltage
−0.5 to +6.5
V
VIN
DC Input Voltage
−0.5 to +6.5
V
−0.5 to VCC + 0.5
−0.5 to +6.5
−0.5 to +6.5
V
VIN < GND
−50
mA
VOUT < GND
−50
mA
VOUT
Characteristics
DC Output Voltage
Active−Mode (High or Low State)
Tri−State Mode (Note 1)
Power−Down Mode (VCC = 0 V)
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IOUT
DC Output Source/Sink Current
±50
mA
DC Supply Current per Supply Pin or Ground Pin
±100
mA
ICC or IGND
TSTG
−65 to +150
°C
TL
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 secs
260
°C
TJ
Junction Temperature Under Bias
+150
°C
qJA
Thermal Resistance (Note 2)
SC−88
SC−74
UDFN6
377
320
154
°C/W
PD
Power Dissipation in Still Air
SC−88
SC−74
UDFN6
332
390
812
mW
Level 1
−
MSL
Moisture Sensitivity
FR
Flammability Rating
VESD
ILatchup
ESD Withstand Voltage (Note 3)
Oxygen Index: 28 to 34
UL 94 V−0 @ 0.125 in
−
Human Body Model
Charged Device Mode
2000
1000
V
$100
mA
Latchup Performance (Note 4)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Applicable to devices with outputs that may be tri−stated.
2. Measured with minimum pad spacing on an FR4 board, using 10mm−by−1inch, 2 ounce copper trace no air flow per JESD51−7.
3. HBM tested to ANSI/ESDA/JEDEC JS−001−2017. CDM tested to EIA/JESD22−C101−F. JEDEC recommends that ESD qualification to
EIA/JESD22−A115−A (Machine Model) be discontinued per JEDEC/JEP172A.
4. Tested to EIA/JESD78 Class II.
RECOMMENDED OPERATING CONDITIONS
Symbol
Characteristics
VCC
Positive DC Supply Voltage
VIN
DC Input Voltage
VOUT
TA
tr , tf
DC Output Voltage
Active−Mode (High or Low State)
Tri−State Mode (Note 1)
Power−Down Mode (VCC = 0 V)
Operating Temperature Range
Input Rise and Fall Time
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3.0 V to 3.6 V
VCC = 4.5 V to 5.5 V
Min
Max
Unit
1.65
5.5
V
0
5.5
V
0
0
0
VCC
5.5
5.5
−55
+125
°C
0
0
0
0
20
20
10
5
ns
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com
3
NL17SZ11
DC ELECTRICAL CHARACTERISTICS
Symbol
VIH
VIL
TA = 255C
−555C 3 TA 3 1255C
VCC
(V)
Min
Typ
Max
Min
Max
Units
High−Level Input
Voltage
1.65 to 1.95
0.65 VCC
−
−
0.65 VCC
−
V
2.3 to 5.5
0.70 VCC
−
−
0.70 VCC
−
Low−Level Input
Voltage
1.65 to 1.95
−
−
0.35 VCC
−
0.35 VCC
2.3 to 5.5
−
−
0.30 VCC
−
0.30 VCC
Parameter
Condition
V
VOH
High−Level Output
Voltage
VIN = VIH or VIL
IOH = −100 mA
IOH = −4 mA
IOH = −8 mA
IOH = −16 mA
IOH = −24 mA
IOH = −32 mA
1.65 to 5.5
1.65
2.3
3
3
4.5
VCC − 0.1
1.29
1.9
2.5
2.4
3.9
VCC
1.52
2.1
2.8
2.68
4.2
−
−
−
−
−
−
VCC − 0.1
1.29
1.9
2.4
2.3
3.8
−
−
−
−
−
−
VOL
Low−Level Output
Voltage
VIN = VIH or VIL
IOH = 100 mA
IOH = 4 mA
IOH = 8 mA
IOH = 16 mA
IOH = 24 mA
IOH = 32 mA
1.65 to 5.5
1.65
2.3
3
3
4.5
−
−
−
−
−
−
−
0.08
0.11
0.15
0.22
0.22
0.1
0.24
0.3
0.4
0.55
0.55
−
−
−
−
−
−
0.1
0.24
0.3
0.4
0.55
0.55
Input Leakage Current
VIN = 5.5 V or GND
1.65 to 5.5
−
−
±0.1
−
±1.0
mA
IOFF
Power Off Leakage
Current
VIN = 5.5 V or
VOUT = 5.5 V
0
−
−
1.0
−
10
mA
ICC
Quiescent Supply
Current
VIN = VCC or GND
5.5
−
−
1.0
−
10
mA
IIN
V
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
AC ELECTRICAL CHARACTERISTICS
TA = 25°C
Symbol
tPLH,
tPHL
Condition
VCC (V)
Min
Typ
Max
Min
Max
Units
RL = 1 MW, CL = 50 pF
1.8 ± 0.15
−
9.0
18.5
−
19.0
ns
RL = 1 MW, CL = 15 pF
2.5 ± 0.2
−
4.9
10.5
−
11.0
RL = 1 MW, CL = 15 pF
3.3 ± 0.3
−
3.5
8.5
−
9.0
−
4.1
8.5
−
9.0
−
2.5
6.5
−
7.0
−
2.9
7.5
−
8.0
Parameter
Propagation Delay
(A or B or C) to Y
(Figure 3 and 4)
*55°C 3 TA 3 125°C
RL = 500 W, CL = 50 pF
RL = 1 MW, CL = 15 pF
5.0 ± 0.5
RL = 500 W, CL = 50 pF
CAPACITIVE CHARACTERISTICS
Symbol
CIN
Parameter
Condition
Typical
Units
Input Capacitance
VCC = 5.5 V, VIN = 0 V or VCC
2.5
pF
COUT
Output Capacitance
VCC = 5.5 V, VIN = 0 V or VCC
4.0
pF
CPD
Power Dissipation Capacitance
(Note 5)
10 MHz, VCC = 5.5 V, VIN = 0 V or VCC
4.0
pF
5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic
power consumption; PD = CPD VCC2 fin + ICC VCC.
www.onsemi.com
4
NL17SZ11
OPEN
2 x VCC
Test
Switch
Position
tPLH / tPHL
Open
tPLZ / tPZL
2 x VCC
50
500
500
tPHZ / tPZH
GND
50
500
500
GND
R1
OUTPUT
DUT
RL
RT
CL, pF
RL, W
R1 , W
See AC Characteristics Table
X = Don’t Care
CL *
CL includes probe and jig capacitance
RT is ZOUT of pulse generator (typically 50 W)
f = 1 MHz
Figure 3. Test Circuit
tr = 3 ns
tf = 3 ns
90%
90%
Vmi
INPUT
Vmi
INPUT
Vmi
10%
10%
tPHL
Vmi
GND
GND
tPZL
tPLH
Vmo
OUTPUT
VCC
VCC
tPLZ
~VCC
VOH
Vmo
OUTPUT
Vmo
VOL + VY
VOL
VOL
tPLH
OUTPUT
tPHL
Vmo
tPZH
VOH
Vmo
tPHZ
VOH
VOH − VY
Vmo
OUTPUT
VOL
~0 V
Figure 4. Switching Waveforms
Vmo, V
VCC, V
Vmi, V
tPLH, tPHL
1.65 to 1.95
VCC/2
VCC/2
VCC/2
0.15
2.3 to 2.7
VCC/2
VCC/2
VCC/2
0.15
3.0 to 3.6
VCC/2
VCC/2
VCC/2
0.3
4.5 to 5.5
VCC/2
VCC/2
VCC/2
0.3
www.onsemi.com
5
tPZL, tPLZ, tPZH, tPHZ
VY, V
NL17SZ11
DEVICE ORDERING INFORMATION
Packages
Specific Device Code
Pin 1 Orientation
(See below)
Shipping†
NL17SZ11DFT2G
(In Development)
SC−88
TBD
Q4
3000 / Tape & Reel
NL17SZ11DBVT1G
SC−74
AD
Q4
3000 / Tape & Reel
NL17SZ11MU1TCG
(In Development)
UDFN6, 1.45 x 1.0, 0.5P
P (Rotated 180° CW)
Q4
3000 / Tape & Reel
NL17SZ11MU3TCG
(In Development)
UDFN6, 1.0 x 1.0, 0.35P
E (Rotated 270° CW)
Q4
3000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Pin 1 Orientation in Tape and Reel
www.onsemi.com
6
NL17SZ11
PACKAGE DIMENSIONS
SC*88/SC70*6/SOT*363
CASE 419B*02
ISSUE Y
2X
aaa H D
D
H
A
D
GAGE
PLANE
65 4
L
L2
E1
E
DETAIL A
12 3
aaa C
2X
bbb H
D
2X 3 TIPS
e
B
6X
b
ddd
TOP VIEW
C A-B D
M
A2
DETAIL A
A
6X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRU−
SIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.
4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF
THE PLASTIC BODY AND DATUM H.
5. DATUMS A AND B ARE DETERMINED AT DATUM H.
6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP.
7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.
ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN
EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDI−
TION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OF THE FOOT.
ccc C
A1
SIDE VIEW
C
SEATING
PLANE
END VIEW
c
RECOMMENDED
SOLDERING FOOTPRINT*
6X
0.30
6X
0.66
2.50
0.65
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb *Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
7
DIM
A
A1
A2
b
C
D
E
E1
e
L
L2
aaa
bbb
ccc
ddd
MILLIMETERS
MIN
NOM MAX
***
***
1.10
0.00
*** 0.10
0.70
0.90
1.00
0.15
0.20
0.25
0.08
0.15
0.22
1.80
2.00
2.20
2.00
2.10
2.20
1.15
1.25
1.35
0.65 BSC
0.26
0.36
0.46
0.15 BSC
0.15
0.30
0.10
0.10
INCHES
MIN
NOM MAX
***
***
0.043
0.000
***0.004
0.027 0.035 0.039
0.006 0.008 0.010
0.003 0.006 0.009
0.070 0.078 0.086
0.078 0.082 0.086
0.045 0.049 0.053
0.026 BSC
0.010 0.014 0.018
0.006 BSC
0.006
0.012
0.004
0.004
NL17SZ11
PACKAGE DIMENSIONS
SC−74
CASE 318F−05
ISSUE N
D
6
HE
1
5
4
2
3
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. 318F−01, −02, −03, −04 OBSOLETE. NEW STANDARD 318F−05.
E
b
e
0.05 (0.002)
q
c
A
L
A1
SOLDERING FOOTPRINT*
2.4
0.094
0.95
0.037
1.9
0.074
0.95
0.037
0.7
0.028
1.0
0.039
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
8
DIM
A
A1
b
c
D
E
e
L
HE
q
MIN
0.90
0.01
0.25
0.10
2.90
1.30
0.85
0.20
2.50
0°
MILLIMETERS
NOM
MAX
1.00
1.10
0.06
0.10
0.37
0.50
0.18
0.26
3.00
3.10
1.50
1.70
0.95
1.05
0.40
0.60
2.75
3.00
−
10°
MIN
0.035
0.001
0.010
0.004
0.114
0.051
0.034
0.008
0.099
0°
INCHES
NOM
0.039
0.002
0.015
0.007
0.118
0.059
0.037
0.016
0.108
−
MAX
0.043
0.004
0.020
0.010
0.122
0.067
0.041
0.024
0.118
10°
NL17SZ11
PACKAGE DIMENSIONS
UDFN6, 1.45x1.0, 0.5P
CASE 517AQ
ISSUE O
A
B
D
L
L
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.30 mm FROM THE TERMINAL TIP.
L1
PIN ONE
REFERENCE
0.10 C
ÉÉÉ
ÉÉÉ
DETAIL A
E
OPTIONAL
CONSTRUCTIONS
ÉÉÉ
ÉÉÉ
EXPOSED Cu
TOP VIEW
0.10 C
DETAIL B
MOLD CMPD
DETAIL B
0.05 C
6X
DIM
A
A1
A2
b
D
E
e
L
L1
OPTIONAL
CONSTRUCTIONS
A
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.07 REF
0.20
0.30
1.45 BSC
1.00 BSC
0.50 BSC
0.30
0.40
−−−
0.15
MOUNTING FOOTPRINT
0.05 C
A1
SIDE VIEW
A2
e
6X
C
6X
SEATING
PLANE
L
1.24
3
1
DETAIL A
6X
0.53
6
0.30
PACKAGE
OUTLINE
4
BOTTOM VIEW
6X
0.50
PITCH
DIMENSIONS: MILLIMETERS
b
0.10 C A B
0.05 C
1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
NOTE 3
www.onsemi.com
9
NL17SZ11
PACKAGE DIMENSIONS
UDFN6, 1x1, 0.35P
CASE 517BX
ISSUE O
PIN ONE
REFERENCE
2X
0.08 C
2X
ÉÉÉ
ÉÉÉ
0.08 C
0.05 C
L1
A B
D
L
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
L3
E
DETAIL A
ALTERNATE TERMINAL
CONSTRUCTION
ÉÉ
ÉÉ
ÇÇ
TOP VIEW
EXPOSED Cu
DETAIL B
A3
A1
MOLD CMPD
DETAIL B
A
ALTERNATE
CONSTRUCTION
0.05 C
SIDE VIEW
C
SEATING
PLANE
3
1
6X
MILLIMETERS
MIN
MAX
0.50
0.65
0.00
0.05
0.13 REF
0.17
0.23
1.00 BSC
1.00 BSC
0.35
0.20
0.40
−−−
0.15
0.26
0.33
RECOMMENDED
SOLDERING FOOTPRINT*
e
DETAIL A
DIM
A
A1
A3
b
D
E
e
L
L1
L3
L
6X
6X
0.25
0.52
1.20
6
4
BOTTOM VIEW
6X
PACKAGE
OUTLINE
b
0.07
M
C A B
0.05
M
C
1
0.35
PITCH
NOTE 3
DIMENSION: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
www.onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NL17SZ11/D
