NL17SZ74 Single D Flip Flop
The NL17SZ74 is a high performance, full function Edge triggered D Flip Flop, with all the features of a standard logic device such as the 74LCX74.
Features
• • • • • • •
Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5.0 V Designed for 1.65 V to 5.5 V VCC Operation 5.0 V Tolerant Inputs − Interface Capability with 5.0 V TTL Logic LVTTL Compatible LVCMOS Compatible 24 mA Balanced Output Sink and Source Capability Near Zero Static Supply Current (10 mA) Substantially Reduces System Power Requirements Replacement for NC7SZ74
M G
http://onsemi.com MARKING DIAGRAM
US8 US SUFFIX CASE 493
MH M G
• • Tiny Ultra Small Package Only 2.1 X 3.0 mm • High ESD Ratings: 2000 V Human Body Model
High ESD Ratings: 200 V Machine Model
= Date Code = Pb−Free Package
• Chip Complexity: FET = 64 • Pb−Free Packages are Available
CP D Q GND Outputs D X X X h l X Q H L H H L NC Q L H H L H NC Operating Mode Asynchronous Set Asynchronous Clear Undetermined Load and Read Register Hold D
PINOUT DIAGRAM
1 2 3 4 8 7 6 5 VCC PR CLR Q
TRUTH TABLE
Inputs PR L H L H H H H h CLR H L L H H H CP X X X ↑ ↑ ↑
LOGIC DIAGRAM
PR 7 2 5 3 6 CLR VCC = 8, GND = 4 Q Q
= High Voltage Level = High Voltage Level One Setup Time Prior to the Low−to−High Clock Transition L = Low Voltage Level l = Low Voltage Level One Setup Time Prior to the Low−to−High Clock Transition NC = No Change X = High or Low Voltage Level and Transitions are Acceptable ↑ = Low−to−High Transition ↑ = Not a Low−to−High Transition For ICC reasons, DO NOT FLOAT Inputs
CP
1
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
April, 2006 − Rev. 4
Publication Order Number: NL17SZ74/D
NL17SZ74
MAXIMUM RATINGS
Symbol VCC VI VO IIK IOK IO ICC IGND TSTG TL TJ qJA PD MSL FR VESD DC Supply Voltage DC Input Voltage DC Output Voltage − Output in High or Low State (Note 1) DC Input Diode Current DC Output Diode Current DC Output Sink Current DC Supply Current Per Supply Pin DC Ground Current Per Ground Pin Storage Temperature Range Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature Under Bias Thermal Resistance (Note 2) Power Dissipation in Still Air at 85°C Moisture Sensitivity Flammability Rating ESD Withstand Voltage Oxygen Index: 28 to 34 Human Body Model (Note 3) Machine Model (Note 4) Charged Device Model (Note 5) VI < GND VO < GND Parameter Value −0.5 to +7.0 −0.5 to +7.0 −0.5 to VCC +0.5 −50 −50 ±50 ±100 ±100 −65 to +150 260 +150 250 250 Level 1 UL 94 V−0 @ 0.125 in >2000 >200 N/A V Unit V V V mA mA mA mA mA °C °C °C °C/W mW
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. IO absolute maximum rating must be observed. 2. Measured with minimum pad spacing on an FR4 board, using 10 mm X 1 inch, 2 ounce copper trace with no air flow. 3. Tested to EIA/JESD22−A114−A. 4. Tested to EIA/JESD22−A115−A. 5. Tested to JESD22−C101−A.
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VO TA Dt/DV Supply Voltage Input Voltage Output Voltage Operating Free−Air Temperature Input Transition Rise or Fall Rate VCC = 2.5 V ±0.2 V VCC = 3.0 V ±0.3 V VCC = 5.0 V ±0.5 V Parameter Operating Data Retention Only (Note 6) (HIGH or LOW State) Min 1.65 1.5 0 0 −40 0 0 0 Max 5.5 5.5 5.5 VCC +85 20 10 5.0 Unit V V V °C ns/V
6. Unused inputs may not be left open. All inputs must be tied to a high−logic voltage level or a low−logic input voltage level.
ORDERING INFORMATION
Device NL17SZ74US NL17SZ74USG TNL17SZ74USG Package US8 US8 (Pb−Free) US8 (Pb−Free) Shipping† 3000 / Tape & Reel 3000 / Tape & Reel 3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
2
NL17SZ74
DETAILED DEVICE ORDERING INFORMATION
Device Nomenclature Device Order Number NL17SZ74US Logic Circuit Indicator NL No. of Gates per Package 1 Temp Range Identifier 7 Device Function 74 Package Suffix US Package Type US8 Tape and Reel Size 178 mm, 3000 Unit
Technology SZ
DC ELECTRICAL CHARACTERISTICS
VCC Symbol VIH Parameter High−Level Input Voltage Condition (V) 1.65 2.3 to 5.5 VIL Low−Level Input Voltage 1.65 2.3 to 5.5 VOH High−Level Output Voltage VIN = VIL or VIL IOH = 100 mA IOH = −3 mA IOH = −8 mA IOH = −12 mA IOH = −16 mA IOH = −24 mA IOH = −32 mA IOL = 100 mA IOL = 3 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA VIN = VCC or GND 5.5V or VIN = GND VIN = VCC or GND 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 5.5 0 5.5 VCC − 0.1 1.29 1.9 2.2 2.4 2.3 3.8 VCC 1.52 2.1 2.4 2.7 2.5 4.0 0.008 0.10 0.12 0.15 0.19 0.30 0.30 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $0.1 1.0 1.0 Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC VCC − 0.1 1.29 1.9 2.2 2.4 2.3 3.8 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $1.0 10 10 TA = 25_C Typ Max *40_C v TA v 85_C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC V V Max Unit V
VOL
Low−Level Output Voltage VIN = VIH
V
IIN IOFF ICC
Input Leakage Current Power off Input Leakage Current Quiescent Supply Current
mA mA mA
http://onsemi.com
3
ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ Î Î ÎÎÎ Î Î Î Î Î Î Î ÎÎÎÎÎ ÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎ ÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ Î ÎÎÎÎÎ ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î Î Î Î Î ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Î ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ Î Î Î Î ÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î Î Î Î Î ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎ ÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Î ÎÎÎ Î Î Î Î Î Î Î Î Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎ Î ÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î Î Î ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Î Î Î Î Î Î Î ÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3.0 ns)
Symbol fMAX tPLH, tPHL tPLH, tPHL tREC tW tH tS Recover Time PR; CLR to CP (Waveform 3) Pulse Width, CP, CLR, PR (Waveform 3) Hold Time, D to CP (Waveform 1) Setup Time, D to CP (Waveform 1) Propagation Delay, PR or CLR to Q or Q (Waveform 2) Propagation Delay, CP to Q or Q (Waveform 1) Parameter Maximum Clock Frequency (50% Duty Cycle) (Waveform 1) 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 VCC (V) CL = 15 pF RD = 1 MW S1 = Open CL = 15 pF RD = 1 MW S1 = Open CL = 15 pF RD = 1 MW S1 = Open CL = 15 pF RD = 1 MW S1 = Open CL = 15 pF RD = 1 MW S1 = Open CL = 15 pF RD = 1 MW S1 = Open Test Conditions CL = 15 pF RD = 1 MW S1 = Open CL = 50 pF, RD = 500 W, S1 = Open CL = 50 pF, RD = 500 W, S1 = Open CL = 50 pF, RD = 500 W, S1 = Open CL = 50 pF, RD = 500 W, S1 = Open CL = 50 pF, RD = 500 W, S1 = Open CL = 50 pF, RD = 500 W, S1 = Open CL = 50 pF, RD = 500 W, S1 = Open
8. TA = +25°C, f = 1 MHz 9. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 1) CPD is related to ICCD dynamic operating current by the expression: ICCD = CPD VCC fin + ICC(static).
7. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC / 2 (per flip−flop). CPD is used to determine the no−load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC.
CAPACITANCE (Note 8)
Symbol
COUT
CPD
CIN
Power Dissipation Capacitance (Note 9) Frequency = 10 MHz
Output Capacitance
Input Capacitance
Parameter
http://onsemi.com
NL17SZ74
4 Min 75 150 200 250 175 200 2.5 1.5 1.0 0.8 1.0 1.0 2.5 1.5 1.0 0.8 1.0 1.0 6.5 3.5 2.0 1.5 2.0 1.5 0.5 0.5 0.5 0.5 0.5 0.5 6.0 4.0 3.0 2.0 3.0 2.0 8.0 4.5 3.0 3.0 3.0 3.0 VCC = 3.3 V VCC = 5.0 V VCC = 5.5 V VCC = 5.5 V Condition TA = 25°C Typ 6.5 3.8 2.8 2.2 3.4 2.6 6.5 3.8 2.8 2.2 3.4 2.6 12.5 7.5 6.5 4.5 7.0 5.0 14 9.0 6.5 5.0 7.0 5.0 Max Min 75 150 200 250 175 200 2.5 1.5 1.0 0.8 1.0 1.0 2.5 1.5 1.0 0.8 1.0 1.0 6.5 3.5 2.0 1.5 2.0 1.5 0.5 0.5 0.5 0.5 0.5 0.5 6.0 4.0 3.0 2.0 3.0 2.0 8.0 4.5 3.0 3.0 3.0 3.0 TA = −40 to 85°C Typical 7.0 7.0 13 8.0 7.0 5.0 7.5 5.5 14.5 9.5 7.0 5.5 7.5 5.5 Max 16 21 MHz Unit MHz Unit pF pF pF ns ns ns ns ns
NL17SZ74
Vcc D 50% 0V ts CP 50% 0V fmax tPLH, tPHL VOH Q, Q 50% th tw Vcc
VOL WAVEFORM 1 − PROPAGATION DELAYS, SETUP AND HOLD TIMES tR = tF = 3.0 ns, 10% to 90%; f = 1 MHz; tW = 500 ns Vcc PR 50% 0V Vcc CLR 50% 0V tPLH Q 50% tPHL 50% VOL tPLH Q tPHL WAVEFORM 2 − PROPAGATION DELAYS tR = tF = 3.0 ns, 10% to 90%; f = 1 MHz; tW = 500 ns tw PR, CLR 50% 0V trec CP 50% Vcc tw 0V WAVEFORM 3 − RECOVERY TIME tR = tF = 3.0 ns from 10% to 90%; f = 1 MHz; tw = 500 ns Output Reg: VOL ≤ 0.8 V, VOH ≥ 2.0 V Vcc 50% 50% VOH
Figure 1. AC Waveforms
VCC PULSE GENERATOR RT DUT CL RL
Figure 2. Test Circuit http://onsemi.com
5
NL17SZ74
PACKAGE DIMENSIONS
US8 US SUFFIX CASE 493−02 ISSUE B
−X− A
8 5
−Y−
J
DETAIL E B L
1
4
R S U C
P
G
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION “A” DOES NOT INCLUDE MOLD FLASH, PROTRUSION OR GATE BURR. MOLD FLASH. PROTRUSION AND GATE BURR SHALL NOT EXCEED 0.140 MM (0.0055”) PER SIDE. 4. DIMENSION “B” DOES NOT INCLUDE INTER−LEAD FLASH OR PROTRUSION. INTER−LEAD FLASH AND PROTRUSION SHALL NOT E3XCEED 0.140 (0.0055”) PER SIDE. 5. LEAD FINISH IS SOLDER PLATING WITH THICKNESS OF 0.0076−0.0203 MM. (300−800 “). 6. ALL TOLERANCE UNLESS OTHERWISE SPECIFIED ±0.0508 (0.0002 “). MILLIMETERS MIN MAX 1.90 2.10 2.20 2.40 0.60 0.90 0.17 0.25 0.20 0.35 0.50 BSC 0.40 REF 0.10 0.18 0.00 0.10 3.00 3.20 0_ 6_ 5_ 10 _ 0.23 0.34 0.23 0.33 0.37 0.47 0.60 0.80 0.12 BSC INCHES MIN MAX 0.075 0.083 0.087 0.094 0.024 0.035 0.007 0.010 0.008 0.014 0.020 BSC 0.016 REF 0.004 0.007 0.000 0.004 0.118 0.126 0_ 6_ 5_ 10 _ 0.010 0.013 0.009 0.013 0.015 0.019 0.024 0.031 0.005 BSC
−T−
SEATING PLANE
D 0.10 (0.004)
K
M
0.10 (0.004) T N TXY V
H
R 0.10 TYP
M
F DETAIL E
DIM A B C D F G H J K L M N P R S U V
SOLDERING FOOTPRINT*
3.8 0.015 0.50 0.0197 1.8 0.07 0.30 0.012 1.0 0.0394
SCALE 8:1 mm inches
*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.
http://onsemi.com
6
NL17SZ74/D
