ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
Dual Inverter with Open
Drain Outputs
NL27WZ06
The NL27WZ06 is a high performance dual inverter with open drain
outputs operating from a 1.65 to 5.5 V supply.
Features
•
•
•
•
•
•
•
•
•
www.onsemi.com
Designed for 1.65 V to 5.5 V VCC Operation
2.1 ns tPD at VCC = 5 V (Typ)
Inputs/Outputs Overvoltage Tolerant up to 5.5 V
IOFF Supports Partial Power Down Protection
Sink 24 mA at 3.0 V
Available in SC−88, SC−74 and UDFN6 Packages
Chip Complexity < 100 FETs
NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
A1
1
Y1
A2
1
Y2
MARKING
DIAGRAMS
6
1
SC−88
DF SUFFIX
CASE 419B
XXXM G
G
1
SC−74
CASE318F−05
6
XXX MG
G
1
1
UDFN6
1.45 x 1.0
CASE 517AQ
XM
1
UDFN6,
1.2x1.0, 0.4P
CASE 517AA−01
XM
Figure 1. Logic Symbol
UDFN6
1.0 x 1.0
CASE 517BX
XM
1
X, XXX = Specific Device Code
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or position may
vary depending upon manufacturing location.
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 7 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
September, 2020 − Rev. 11
1
Publication Order Number:
NL27WZ06/D
NL27WZ06
A1
A1
1
6
Y1
GND
2
5
VCC
A2
3
4
Y2
Y1
1
6
GND
2
5
VCC
A2
3
4
Y2
(SC−88/SC−74)
UDFN6
Figure 2. Pinout (Top View)
PIN ASSIGNMENT
FUNCTION TABLE
Pin
Function
A Input
Y Output
1
A1
L
Z
2
GND
H
L
3
A2
4
Y2
5
VCC
6
Y1
www.onsemi.com
2
NL27WZ06
MAXIMUM RATINGS
Symbol
Value
Unit
VCC
DC Supply Voltage
SC−88 (NLV)
SC−88, SC−74, UDFN6
−0.5 to +7.0
−0.5 to +6.5
V
VIN
DC Input Voltage
SC−88 (NLV)
SC−88, SC−74, UDFN6
−0.5 to +7.0
−0.5 to +6.5
V
VOUT
Characteristics
DC Output Voltage
SC−88 (NLV)
Active−Mode (High or Low State)
Tri−State Mode (Note 1)
Power−Down Mode (VCC = 0 V)
−0.5 to VCC + 0.5
−0.5 to +7.0
−0.5 to +7.0
V
DC Output Voltage
SC−88, SC−74, UDFN6
Active−Mode (High or Low State)
Tri−State Mode (Note 1)
Power−Down Mode (VCC = 0 V)
−0.5 to VCC + 0.5
−0.5 to +6.5
−0.5 to +6.5
V
VIN < GND
−50
mA
VOUT < GND
−50
mA
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IOUT
DC Output Source/Sink Current
±50
mA
DC Supply Current per Supply Pin or Ground Pin
±100
mA
−65 to +150
°C
ICC or IGND
TSTG
Storage Temperature Range
TL
Lead Temperature, 1 mm from Case for 10 secs
260
°C
TJ
Junction Temperature Under Bias
+150
°C
qJA
Thermal Resistance (Note 2)
SC−88
SC−74
UDFN6
377
320
154
°C/W
PD
Power Dissipation in Still Air
SC−88
SC−74
UDFN6
332
390
812
mW
Level 1
−
MSL
Moisture Sensitivity
FR
Flammability Rating
Oxygen Index: 28 to 34
UL 94 V−0 @ 0.125 in
−
ESD Withstand Voltage (Note 3)
Human Body Model
Charged Device Model
2000
1000
V
$100
mA
VESD
ILatchup
Latchup Performance (Note 4)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Applicable to devices with outputs that may be tri−stated.
2. Measured with minimum pad spacing on an FR4 board, using 10mm−by−1inch, 2 ounce copper trace no air flow per JESD51−7.
3. HBM tested to ANSI/ESDA/JEDEC JS−001−2017. CDM tested to EIA/JESD22−C101−F. JEDEC recommends that ESD qualification to
EIA/JESD22−A115−A (Machine Model) be discontinued per JEDEC/JEP172A.
4. Tested to EIA/JESD78 Class II.
www.onsemi.com
3
NL27WZ06
RECOMMENDED OPERATING CONDITIONS
Symbol
Characteristics
VCC
Positive DC Supply Voltage
VIN
DC Input Voltage
VOUT
TA
tr , tf
DC Output Voltage
Active−Mode (High or Low State)
Tri−State Mode (Note 1)
Power−Down Mode (VCC = 0 V)
Operating Temperature Range
Input Rise and Fall Time
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3.0 V to 3.6 V
VCC = 4.5 V to 5.5 V
Min
Max
Unit
1.65
5.5
V
0
5.5
V
0
0
0
VCC
5.5
5.5
−55
+125
°C
0
0
0
0
20
20
10
5
ns
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
Symbol
VIH
VIL
VOL
TA = 255C
−555C 3 TA 3 1255C
VCC
(V)
Min
Typ
Max
Min
Max
Units
High−Level Input
Voltage
1.65 to 1.95
0.65 VCC
−
−
0.65 VCC
−
V
2.3 to 5.5
0.70 VCC
−
−
0.70 VCC
−
Low−Level Input
Voltage
1.65 to 1.95
−
−
0.35 VCC
−
0.35 VCC
2.3 to 5.5
−
−
0.30 VCC
−
0.30 VCC
−
−
−
−
−
−
−
0.1
0.24
0.3
0.4
0.4
0.55
0.55
Parameter
Condition
V
Low−Level Output
Voltage
VIN = VIH or VIL
IOL = 100 mA
IOL = 4 mA
IOL = 8 mA
IOL = 12 mA
IOL = 16 mA
IOL = 24 mA
IOL = 32 mA
1.65 to 5.5
1.65
2.3
2.7
3.0
3.0
4.5
−
−
−
−
−
−
−
0.08
0.2
0.22
0.28
0.38
0.42
0.1
0.24
0.3
0.4
0.4
0.55
0.55
IIN
Input Leakage Current
VIN = 5.5 V or GND
1.65 to 5.5
−
−
±0.1
−
±1.0
mA
IOZ
3−State Output
Leakage Current
VOUT = 0 V to 5.5 V
1.65 to 5.5
−
−
±0.5
−
±5.0
mA
IOFF
Power Off Leakage
Current
VIN = 5.5 V or
VOUT = 5.5 V
0
−
−
1.0
−
10
mA
ICC
Quiescent Supply
Current
VIN = VCC or GND
5.5
−
−
1.0
−
10
mA
ICCT
Quiescent Supply
Current
3.6
−
−
10
−
100
mA
VIN = 3.0 V
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
4
NL27WZ06
AC ELECTRICAL CHARACTERISTICS
Symbol
tPZL
tPLZ
Parameter
Condition
Propagation Delay,
(Figures 3 and 4)
Propagation Delay,
(Figures 3 and 4)
TA = 255C
−555C 3 TA 3 1255C
VCC
(V)
Min
Typ
Max
Min
Max
Units
1.65 to 1.95
−
6.0
9.0
−
9.5
ns
2.3 to 2.7
−
3.6
6.1
−
6.5
3.0 to 3.6
−
2.7
5.6
−
6.0
4.5 to 5.5
−
2.1
4.4
−
4.8
1.65 to 1.95
−
4.0
9.0
−
9.5
2.3 to 2.7
−
2.8
6.1
−
6.5
3.0 to 3.6
−
2.5
5.6
−
6.0
4.5 to 5.5
−
2.2
4.4
−
4.8
ns
CAPACITIVE CHARACTERISTICS
Symbol
CIN
Parameter
Condition
Typical
Units
Input Capacitance
VCC = 5.5 V, VIN = 0 V or VCC
2.5
pF
COUT
Output Capacitance
VCC = 5.5 V, VIN = 0 V or VCC
4.0
pF
CPD
Power Dissipation Capacitance
(Note 5)
10 MHz, VCC = 5.5 V, VIN = 0 V or VCC
4.0
pF
5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic
power consumption; PD = CPD VCC2 fin + ICC VCC.
www.onsemi.com
5
NL27WZ06
OPEN
2 x VCC
Test
Switch
Position
tPLH / tPHL
Open
tPLZ / tPZL
2 x VCC
50
500
500
tPHZ / tPZH
GND
50
500
500
GND
R1
OUTPUT
DUT
RL
RT
CL, pF
RL, W
R1 , W
See AC Characteristics Table
X = Don’t Care
CL *
CL includes probe and jig capacitance
RT is ZOUT of pulse generator (typically 50 W)
f = 1 MHz
Figure 3. Test Circuit
tr = 3 ns
tf = 3 ns
90%
90%
Vmi
INPUT
Vmi
INPUT
Vmi
10%
10%
tPHL
Vmi
GND
GND
tPZL
tPLH
Vmo
OUTPUT
VCC
VCC
tPLZ
~VCC
VOH
Vmo
OUTPUT
Vmo
VOL + VY
VOL
VOL
tPLH
OUTPUT
tPHL
Vmo
tPZH
VOH
Vmo
tPHZ
VOH
VOH − VY
Vmo
OUTPUT
VOL
~0 V
Figure 4. Switching Waveforms
Vmo, V
VCC, V
Vmi, V
tPLH, tPHL
1.65 to 1.95
VCC/2
VCC/2
VCC/2
0.15
2.3 to 2.7
VCC/2
VCC/2
VCC/2
0.15
3.0 to 3.6
VCC/2
VCC/2
VCC/2
0.3
4.5 to 5.5
VCC/2
VCC/2
VCC/2
0.3
www.onsemi.com
6
tPZL, tPLZ, tPZH, tPHZ
VY, V
NL27WZ06
DEVICE ORDERING INFORMATION
Packages
Specific Device Code
Pin 1 Orientation
(See below)
Shipping†
NL27WZ06DFT2G
SC−88
MF
Q4
3000 / Tape & Reel
NLV27WZ06DFT2G*
SC−88
MF
Q4
3000 / Tape & Reel
Device
NL27WZ06DBVT1G
SC−74
MF
Q4
3000 / Tape & Reel
NL27WZ06MU1TCG
(In Development)
UDFN6, 1.45 x 1.0 x 0.5P
K (Rotated 90° CW)
Q4
3000 / Tape & Reel
NL27WZ06MU3TCG
(In Development)
UDFN6, 1.0 x 1.0 x 0.35P
Y (Rotated 90° CW)
Q4
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
Pin 1 Orientation in Tape and Reel
www.onsemi.com
7
NL27WZ06
PACKAGE DIMENSIONS
SC−88/SC70−6/SOT−363
CASE 419B−02
ISSUE Y
2X
aaa H D
D
H
A
D
6
5
GAGE
PLANE
4
1
2
L
L2
E1
E
DETAIL A
3
aaa C
2X
bbb H D
2X 3 TIPS
e
B
6X
b
ddd
TOP VIEW
C A-B D
M
A2
DETAIL A
A
6X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.
4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF
THE PLASTIC BODY AND DATUM H.
5. DATUMS A AND B ARE DETERMINED AT DATUM H.
6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP.
7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.
ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN
EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDITION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OF THE FOOT.
ccc C
A1
SIDE VIEW
C
SEATING
PLANE
END VIEW
c
RECOMMENDED
SOLDERING FOOTPRINT*
6X
0.30
6X
0.66
2.50
0.65
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
8
DIM
A
A1
A2
b
C
D
E
E1
e
L
L2
aaa
bbb
ccc
ddd
MILLIMETERS
MIN
NOM MAX
−−−
−−−
1.10
0.00
−−−
0.10
0.70
0.90
1.00
0.15
0.20
0.25
0.08
0.15
0.22
1.80
2.00
2.20
2.00
2.10
2.20
1.15
1.25
1.35
0.65 BSC
0.26
0.36
0.46
0.15 BSC
0.15
0.30
0.10
0.10
INCHES
NOM MAX
−−− 0.043
−−− 0.004
0.035 0.039
0.008 0.010
0.006 0.009
0.078 0.086
0.082 0.086
0.049 0.053
0.026 BSC
0.010 0.014 0.018
0.006 BSC
0.006
0.012
0.004
0.004
MIN
−−−
0.000
0.027
0.006
0.003
0.070
0.078
0.045
NL27WZ06
PACKAGE DIMENSIONS
SC−74
CASE 318F−05
ISSUE N
D
6
HE
1
5
4
2
3
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. 318F−01, −02, −03, −04 OBSOLETE. NEW STANDARD 318F−05.
E
b
e
0.05 (0.002)
q
c
A
L
A1
SOLDERING FOOTPRINT*
2.4
0.094
0.95
0.037
1.9
0.074
0.95
0.037
0.7
0.028
1.0
0.039
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
9
DIM
A
A1
b
c
D
E
e
L
HE
q
MIN
0.90
0.01
0.25
0.10
2.90
1.30
0°
0.85
0.20
2.50
MILLIMETERS
NOM
MAX
1.00
1.10
0.06
0.10
0.37
0.50
0.18
0.26
3.00
3.10
1.50
1.70
10°
0.95
1.05
0.40
0.60
2.75
3.00
−
MIN
0.035
0.001
0.010
0.004
0.114
0.051
0°
0.034
0.008
0.099
INCHES
NOM
0.039
0.002
0.015
0.007
0.118
0.059
0.037
0.016
0.108
−
MAX
0.043
0.004
0.020
0.010
0.122
0.067
10°
0.041
0.024
0.118
NL27WZ06
PACKAGE DIMENSIONS
UDFN6, 1.45x1.0, 0.5P
CASE 517AQ
ISSUE O
A
B
D
PIN ONE
REFERENCE
0.10 C
L1
ÉÉÉ
ÉÉÉ
ÉÉÉ
DETAIL A
E
OPTIONAL
CONSTRUCTIONS
ÉÉ
ÉÉ
EXPOSED Cu
TOP VIEW
0.10 C
DETAIL B
OPTIONAL
CONSTRUCTIONS
A
0.05 C
MOLD CMPD
DETAIL B
0.05 C
6X
L
L
A1
A2
SIDE VIEW
e
6X
C
SEATING
PLANE
L
3
1
DETAIL A
6
4
6X
b
0.10 C A B
0.05 C
BOTTOM VIEW
NOTE 3
MOUNTING FOOTPRINT
6X
0.30
PACKAGE
OUTLINE
1.24
6X
0.53
1
0.50
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
10
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.30 mm FROM THE TERMINAL TIP.
DIM
A
A1
A2
b
D
E
e
L
L1
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.07 REF
0.20
0.30
1.45 BSC
1.00 BSC
0.50 BSC
0.30
0.40
−−−
0.15
NL27WZ06
PACKAGE DIMENSIONS
UDFN6, 1.2x1.0, 0.4P
CASE 517AA−01
ISSUE D
EDGE OF PACKAGE
PIN ONE
REFERENCE
2X
0.10 C
L1
ÉÉ
ÉÉ
E
DETAIL A
Bottom View
(Optional)
TOP VIEW
2X
EXPOSED Cu
0.10 C
(A3)
0.10 C
A1
A
10X
0.08 C
ÉÉÉ
ÉÉÉ
A3
DETAIL B
Side View
(Optional)
5X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.127 REF
0.15
0.25
1.20 BSC
1.00 BSC
0.40 BSC
0.30
0.40
0.00
0.15
0.40
0.50
MOUNTING FOOTPRINT*
6X
C
A1
DIM
A
A1
A3
b
D
E
e
L
L1
L2
MOLD CMPD
SEATING
PLANE
SIDE VIEW
1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.25 AND
0.30 mm FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
A
B
D
6X
0.42
0.22
L
3
L2
6X
b
0.10 C A B
0.05 C
6
4
0.40
PITCH
e
NOTE 3
1.07
DIMENSIONS: MILLIMETERS
BOTTOM VIEW
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
11
NL27WZ06
PACKAGE DIMENSIONS
UDFN6, 1x1, 0.35P
CASE 517BX
ISSUE O
PIN ONE
REFERENCE
2X
0.10 C
2X
ÉÉÉ
ÉÉÉ
ÉÉÉ
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
E
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.12
0.22
1.00 BSC
1.00 BSC
0.35 BSC
0.25
0.35
0.30
0.40
0.05 C
SIDE VIEW
A1
C
e
5X
SEATING
PLANE
RECOMMENDED
SOLDERING FOOTPRINT*
L
5X
0.48
3
1
6X
0.22
L1
1.18
6
4
BOTTOM VIEW
6X
b
0.10
M
C A B
0.05
M
C
0.53
NOTE 3
1
PKG
OUTLINE
0.35
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
12
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
工商网监
湘ICP备2023018690号
