NLSV1T34MUTBG

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. 1-Bit Dual-Supply Non-Inverting Level Translator NLSV1T34 The NLSV1T34 is a 1−bit configurable dual−supply voltage level translator. The input An and output Bn ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both supply rails are configurable from 0.9 V to 4.5 V allowing universal low−voltage translation from the input An to the output Bn port. www.onsemi.com MARKING DIAGRAMS • • • • • • • • Typical Applications 1 AM 1 QM 1 ULLGA6 MX1 SUFFIX CASE 613AF 1 Important Information • ESD Protection for All Pins: HBM (Human Body Model) > 3000 V QMG G 1 PIN ASSIGNMENT VCCB VCCA 1 B A 5 SC−88A (SOT−353/SC−70) DF SUFFIX CASE 419A Q, A = Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. • Mobile Phones, PDAs, Other Portable Devices VCCA M G UDFN6 MU SUFFIX CASE 517AQ M • Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V High−Speed w/ Balanced Propagation Delay Inputs and Outputs have OVT Protection to 4.5 V Non−preferential VCCA and VCCB Sequencing Power−Off Protection Power−Off High Impedance Inputs and Outputs Ultra−Small Packaging: 1.45 mm x 1.0 mm ULLGA6 2.0 mm x 2.1 mm SC−88A 1.2 mm x 1.0 mm UDFN6 1.45 mm x 1.0 mm UDFN6 NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable These are Pb−Free Devices UDFN6 MU SUFFIX CASE 517AA Q Features A 2 GND 3 Figure 1. Logic Diagram 6 VCCB VCCA 1 5 NC 4 B ULLGA6/UDFN6 (Top View) 5 VCCB A 2 GND 3 4 B SC−88A (Top View) ORDERING INFORMATION See detailed ordering and shipping information on page 5 of this data sheet. © Semiconductor Components Industries, LLC, 2015 November, 2019 − Rev. 10 1 Publication Order Number: NLSV1T34/D NLSV1T34 PIN ASSIGNMENT TRUTH TABLE PIN FUNCTION INPUTS OUTPUTS VCCA Input Port DC Power Supply A B VCCB Output Port DC Power Supply L L GND Ground H H A Input Port B Output Port MAXIMUM RATINGS Symbol VCCA, VCCB Rating Value DC Supply Voltage VI DC Input Voltage VO DC Output Voltage IIK DC Input Diode Current IOK IO Condition Unit −0.5 to +5.5 V A −0.5 to +5.5 V (Power Down) B −0.5 to +5.5 (Active Mode) B −0.5 to +5.5 VCCA = VCCB = 0 V −20 VI < GND mA DC Output Diode Current −50 VO < GND mA DC Output Source/Sink Current ±50 mA ICCA, ICCB DC Supply Current Per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C V Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RECOMMENDED OPERATING CONDITIONS Symbol VCCA, VCCB VI VIO TA Dt / DV Parameter Positive DC Supply Voltage Bus Input Voltage Bus Output Voltage Min Max Unit 0.9 4.5 V GND 4.5 V (Power Down Mode) B GND 4.5 V (Active Mode) B GND VCCB V −40 +85 °C 0 10 nS Operating Temperature Range Input Transition Rise or Rate VI, from 30% to 70% of VCC; VCC = 3.3 V ±0.3 V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. www.onsemi.com 2 NLSV1T34 DC ELECTRICAL CHARACTERISTICS −405C to +855C Symbol VIH VIL VOH Parameter Test Conditions Input HIGH Voltage Input LOW Voltage Output HIGH Voltage VCCA (V) VCCB (V) Min Max Unit 3.6 – 4.5 0.9 – 4.5 V 2.2 − 2.7 – 3.6 2.0 − 2.3 – 2.7 1.6 − 1.4 − 2.3 0.65 * VCCA − 0.9 – 1.4 0.9 * VCCA − 3.6 – 4.5 − 0.8 − 0.8 2.3 – 2.7 − 0.7 1.4 − 2.3 − 0.35 * VCCA 0.9 – 1.4 − 0.1 * VCCA IOH = −100 mA; VI = VIH 0.9 – 4.5 0.9 – 4.5 VCCB – 0.2 − IOH = −0.5 mA; VI = VIH 0.9 0.9 0.75 * VCCB − IOH = −2 mA; VI = VIH 1.4 1.4 1.05 − IOH = −6 mA; VI = VIH 1.65 1.65 1.25 − 2.3 2.3 2.0 − 2.3 2.3 1.8 − 2.7 2.7 2.2 − 2.3 2.3 1.7 − IOH = −12 mA; VI = VIH IOH = −18 mA; VI = VIH VOL Output LOW Voltage 0.9 – 4.5 2.7 – 3.6 3.0 3.0 2.4 − IOH = −24 mA; VI = VIH 3.0 3.0 2.2 − IOL = 100 mA; VI = VIL 0.9 – 4.5 0.9 – 4.5 − 0.2 IOL = 0.5 mA; VI = VIH 1.1 1.1 − 0.3 IOL = 2 mA; VI = VIH 1.4 1.4 − 0.35 IOL = 6 mA; VI = VIL 1.65 1.65 − 0.3 IOL = 12 mA; VI = VIL 2.3 2.3 − 0.4 2.7 2.7 − 0.4 2.3 2.3 − 0.6 3.0 3.0 − 0.4 IOL = 18 mA; VI = VIL IOL = 24 mA; VI = VIL V V V 3.0 3.0 − 0.55 Input Leakage Current VI = VCCA or GND 0.9 – 4.5 0.9 – 4.5 −1.0 1.0 mA ICCA Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 2.0 mA ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 2.0 mA ICCA + ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 – 4.5 − 4.0 mA 0 0 − 5.0 mA II IOFF Power OFF Leakage Current VI = 4.5 V Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 3 NLSV1T34 TOTAL STATIC POWER CONSUMPTION (ICCA + ICCB) −405C to +855C VCCB (V) 4.5 VCCA (V) Min 3.3 Max Min 2.8 Max Min 1.8 Max Min 0.9 Max Min Max Unit 4.5 2 2 2 2 < 1.5 μA 3.3 2 2 2 2 < 1.5 μA 2.8